IPv6 Subnet Calculator
Enter an IPv6 address with a prefix to see its network, address range, number of /64 subnets, and its full and short forms. You can also split the prefix into smaller subnets.
link-localfe80::dd:dd:2940/124
networkfe80::dd:dd:2940/124
first hostfe80::dd:dd:2940
last hostfe80::dd:dd:294f
addresses2⁴ = 16
short formfe80::dd:dd:2940
ipcalc fe80::dd:dd:2940/124
addressfe80:0000:0000:0000:0000:00dd:00dd:2940
networkfe80:0000:0000:0000:0000:00dd:00dd:2940
last hostfe80:0000:0000:0000:0000:00dd:00dd:294f
green = network digits, amber = digit split by the prefix
full formfe80:0000:0000:0000:0000:00dd:00dd:2940
reverse dns0.4.9.2.d.d.0.0.d.d.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.e.f.ip6.arpa
/124 split into /128 · 16 subnets
close ×| # | network | last address |
|---|---|---|
| 1 | fe80::dd:dd:2940/128 | fe80::dd:dd:2940 |
| 2 | fe80::dd:dd:2941/128 | fe80::dd:dd:2941 |
| 3 | fe80::dd:dd:2942/128 | fe80::dd:dd:2942 |
| 4 | fe80::dd:dd:2943/128 | fe80::dd:dd:2943 |
| 5 | fe80::dd:dd:2944/128 | fe80::dd:dd:2944 |
| 6 | fe80::dd:dd:2945/128 | fe80::dd:dd:2945 |
| 7 | fe80::dd:dd:2946/128 | fe80::dd:dd:2946 |
| 8 | fe80::dd:dd:2947/128 | fe80::dd:dd:2947 |
| 9 | fe80::dd:dd:2948/128 | fe80::dd:dd:2948 |
| 10 | fe80::dd:dd:2949/128 | fe80::dd:dd:2949 |
| 11 | fe80::dd:dd:294a/128 | fe80::dd:dd:294a |
| 12 | fe80::dd:dd:294b/128 | fe80::dd:dd:294b |
| 13 | fe80::dd:dd:294c/128 | fe80::dd:dd:294c |
| 14 | fe80::dd:dd:294d/128 | fe80::dd:dd:294d |
| 15 | fe80::dd:dd:294e/128 | fe80::dd:dd:294e |
| 16 | fe80::dd:dd:294f/128 | fe80::dd:dd:294f |
01 / table
IPv6 prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | addresses | /64 subnets | in your /124 |
|---|---|---|---|
| /8 | 2¹²⁰ | 2⁵⁶ | - |
| /12 | 2¹¹⁶ | 2⁵² | - |
| /16 | 2¹¹² | 2⁴⁸ | - |
| /20 | 2¹⁰⁸ | 2⁴⁴ | - |
| /24 | 2¹⁰⁴ | 2⁴⁰ | - |
| /28 | 2¹⁰⁰ | 2³⁶ | - |
| /32 | 2⁹⁶ | 4,294,967,296 | - |
| /36 | 2⁹² | 268,435,456 | - |
| /40 | 2⁸⁸ | 16,777,216 | - |
| /44 | 2⁸⁴ | 1,048,576 | - |
| /48 | 2⁸⁰ | 65,536 | - |
| /52 | 2⁷⁶ | 4,096 | - |
| /56 | 2⁷² | 256 | - |
| /60 | 2⁶⁸ | 16 | - |
| /64 | 2⁶⁴ | 1 | - |
| /72 | 2⁵⁶ | - | - |
| /80 | 2⁴⁸ | - | - |
| /96 | 4,294,967,296 | - | - |
| /112 | 65,536 | - | - |
| /120 | 256 | - | - |
| /124 | 16 | - | 1 |
| /126 | 4 | - | 4 split → |
| /127 | 2 | - | 8 split → |
| /128 | 1 | - | 16 split → |
02 / faq
About this calculator.
How do I use this IPv6 calculator?
▼
Type an IPv6 address followed by a prefix, like 2001:db8:abcd::1/48. Without a prefix it uses /64. The address can be written in full or shortened with ::.
Why does IPv6 have no broadcast address?
▼
IPv6 replaced broadcast with multicast, so no address is set aside for it. That is why this calculator shows the whole range, from the network address to the last address.
What prefix do ISPs usually hand out?
▼
A single LAN is almost always a /64. Home customers usually get a /56 or /60, and an organization or site usually gets a /48. One /48 holds 65,536 /64 subnets.