ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)172.16.7.64/27
network172.16.7.64/27
broadcast172.16.7.95
first host172.16.7.65
last host172.16.7.94
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classB
ipcalc 172.16.7.64/27
address10101100.00010000.00000111.01000000
subnet mask11111111.11111111.11111111.11100000
network10101100.00010000.00000111.01000000
broadcast10101100.00010000.00000111.01011111
green = network part, grey = host part
hex0xac100740
decimal2886731584
reverse dns64.7.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:740

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.7.64/32172.16.7.64 – 172.16.7.64172.16.7.64
2172.16.7.65/32172.16.7.65 – 172.16.7.65172.16.7.65
3172.16.7.66/32172.16.7.66 – 172.16.7.66172.16.7.66
4172.16.7.67/32172.16.7.67 – 172.16.7.67172.16.7.67
5172.16.7.68/32172.16.7.68 – 172.16.7.68172.16.7.68
6172.16.7.69/32172.16.7.69 – 172.16.7.69172.16.7.69
7172.16.7.70/32172.16.7.70 – 172.16.7.70172.16.7.70
8172.16.7.71/32172.16.7.71 – 172.16.7.71172.16.7.71
9172.16.7.72/32172.16.7.72 – 172.16.7.72172.16.7.72
10172.16.7.73/32172.16.7.73 – 172.16.7.73172.16.7.73
11172.16.7.74/32172.16.7.74 – 172.16.7.74172.16.7.74
12172.16.7.75/32172.16.7.75 – 172.16.7.75172.16.7.75
13172.16.7.76/32172.16.7.76 – 172.16.7.76172.16.7.76
14172.16.7.77/32172.16.7.77 – 172.16.7.77172.16.7.77
15172.16.7.78/32172.16.7.78 – 172.16.7.78172.16.7.78
16172.16.7.79/32172.16.7.79 – 172.16.7.79172.16.7.79
17172.16.7.80/32172.16.7.80 – 172.16.7.80172.16.7.80
18172.16.7.81/32172.16.7.81 – 172.16.7.81172.16.7.81
19172.16.7.82/32172.16.7.82 – 172.16.7.82172.16.7.82
20172.16.7.83/32172.16.7.83 – 172.16.7.83172.16.7.83
21172.16.7.84/32172.16.7.84 – 172.16.7.84172.16.7.84
22172.16.7.85/32172.16.7.85 – 172.16.7.85172.16.7.85
23172.16.7.86/32172.16.7.86 – 172.16.7.86172.16.7.86
24172.16.7.87/32172.16.7.87 – 172.16.7.87172.16.7.87
25172.16.7.88/32172.16.7.88 – 172.16.7.88172.16.7.88
26172.16.7.89/32172.16.7.89 – 172.16.7.89172.16.7.89
27172.16.7.90/32172.16.7.90 – 172.16.7.90172.16.7.90
28172.16.7.91/32172.16.7.91 – 172.16.7.91172.16.7.91
29172.16.7.92/32172.16.7.92 – 172.16.7.92172.16.7.92
30172.16.7.93/32172.16.7.93 – 172.16.7.93172.16.7.93
31172.16.7.94/32172.16.7.94 – 172.16.7.94172.16.7.94
32172.16.7.95/32172.16.7.95 – 172.16.7.95172.16.7.95
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →