ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)172.16.4.0/27
network172.16.4.0/27
broadcast172.16.4.31
first host172.16.4.1
last host172.16.4.30
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classB
ipcalc 172.16.4.0/27
address10101100.00010000.00000100.00000000
subnet mask11111111.11111111.11111111.11100000
network10101100.00010000.00000100.00000000
broadcast10101100.00010000.00000100.00011111
green = network part, grey = host part
hex0xac100400
decimal2886730752
reverse dns0.4.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:400

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.4.0/32172.16.4.0 – 172.16.4.0172.16.4.0
2172.16.4.1/32172.16.4.1 – 172.16.4.1172.16.4.1
3172.16.4.2/32172.16.4.2 – 172.16.4.2172.16.4.2
4172.16.4.3/32172.16.4.3 – 172.16.4.3172.16.4.3
5172.16.4.4/32172.16.4.4 – 172.16.4.4172.16.4.4
6172.16.4.5/32172.16.4.5 – 172.16.4.5172.16.4.5
7172.16.4.6/32172.16.4.6 – 172.16.4.6172.16.4.6
8172.16.4.7/32172.16.4.7 – 172.16.4.7172.16.4.7
9172.16.4.8/32172.16.4.8 – 172.16.4.8172.16.4.8
10172.16.4.9/32172.16.4.9 – 172.16.4.9172.16.4.9
11172.16.4.10/32172.16.4.10 – 172.16.4.10172.16.4.10
12172.16.4.11/32172.16.4.11 – 172.16.4.11172.16.4.11
13172.16.4.12/32172.16.4.12 – 172.16.4.12172.16.4.12
14172.16.4.13/32172.16.4.13 – 172.16.4.13172.16.4.13
15172.16.4.14/32172.16.4.14 – 172.16.4.14172.16.4.14
16172.16.4.15/32172.16.4.15 – 172.16.4.15172.16.4.15
17172.16.4.16/32172.16.4.16 – 172.16.4.16172.16.4.16
18172.16.4.17/32172.16.4.17 – 172.16.4.17172.16.4.17
19172.16.4.18/32172.16.4.18 – 172.16.4.18172.16.4.18
20172.16.4.19/32172.16.4.19 – 172.16.4.19172.16.4.19
21172.16.4.20/32172.16.4.20 – 172.16.4.20172.16.4.20
22172.16.4.21/32172.16.4.21 – 172.16.4.21172.16.4.21
23172.16.4.22/32172.16.4.22 – 172.16.4.22172.16.4.22
24172.16.4.23/32172.16.4.23 – 172.16.4.23172.16.4.23
25172.16.4.24/32172.16.4.24 – 172.16.4.24172.16.4.24
26172.16.4.25/32172.16.4.25 – 172.16.4.25172.16.4.25
27172.16.4.26/32172.16.4.26 – 172.16.4.26172.16.4.26
28172.16.4.27/32172.16.4.27 – 172.16.4.27172.16.4.27
29172.16.4.28/32172.16.4.28 – 172.16.4.28172.16.4.28
30172.16.4.29/32172.16.4.29 – 172.16.4.29172.16.4.29
31172.16.4.30/32172.16.4.30 – 172.16.4.30172.16.4.30
32172.16.4.31/32172.16.4.31 – 172.16.4.31172.16.4.31
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →