ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)172.16.3.160/27
network172.16.3.160/27
broadcast172.16.3.191
first host172.16.3.161
last host172.16.3.190
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classB
ipcalc 172.16.3.160/27
address10101100.00010000.00000011.10100000
subnet mask11111111.11111111.11111111.11100000
network10101100.00010000.00000011.10100000
broadcast10101100.00010000.00000011.10111111
green = network part, grey = host part
hex0xac1003a0
decimal2886730656
reverse dns160.3.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:3a0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.3.160/32172.16.3.160 – 172.16.3.160172.16.3.160
2172.16.3.161/32172.16.3.161 – 172.16.3.161172.16.3.161
3172.16.3.162/32172.16.3.162 – 172.16.3.162172.16.3.162
4172.16.3.163/32172.16.3.163 – 172.16.3.163172.16.3.163
5172.16.3.164/32172.16.3.164 – 172.16.3.164172.16.3.164
6172.16.3.165/32172.16.3.165 – 172.16.3.165172.16.3.165
7172.16.3.166/32172.16.3.166 – 172.16.3.166172.16.3.166
8172.16.3.167/32172.16.3.167 – 172.16.3.167172.16.3.167
9172.16.3.168/32172.16.3.168 – 172.16.3.168172.16.3.168
10172.16.3.169/32172.16.3.169 – 172.16.3.169172.16.3.169
11172.16.3.170/32172.16.3.170 – 172.16.3.170172.16.3.170
12172.16.3.171/32172.16.3.171 – 172.16.3.171172.16.3.171
13172.16.3.172/32172.16.3.172 – 172.16.3.172172.16.3.172
14172.16.3.173/32172.16.3.173 – 172.16.3.173172.16.3.173
15172.16.3.174/32172.16.3.174 – 172.16.3.174172.16.3.174
16172.16.3.175/32172.16.3.175 – 172.16.3.175172.16.3.175
17172.16.3.176/32172.16.3.176 – 172.16.3.176172.16.3.176
18172.16.3.177/32172.16.3.177 – 172.16.3.177172.16.3.177
19172.16.3.178/32172.16.3.178 – 172.16.3.178172.16.3.178
20172.16.3.179/32172.16.3.179 – 172.16.3.179172.16.3.179
21172.16.3.180/32172.16.3.180 – 172.16.3.180172.16.3.180
22172.16.3.181/32172.16.3.181 – 172.16.3.181172.16.3.181
23172.16.3.182/32172.16.3.182 – 172.16.3.182172.16.3.182
24172.16.3.183/32172.16.3.183 – 172.16.3.183172.16.3.183
25172.16.3.184/32172.16.3.184 – 172.16.3.184172.16.3.184
26172.16.3.185/32172.16.3.185 – 172.16.3.185172.16.3.185
27172.16.3.186/32172.16.3.186 – 172.16.3.186172.16.3.186
28172.16.3.187/32172.16.3.187 – 172.16.3.187172.16.3.187
29172.16.3.188/32172.16.3.188 – 172.16.3.188172.16.3.188
30172.16.3.189/32172.16.3.189 – 172.16.3.189172.16.3.189
31172.16.3.190/32172.16.3.190 – 172.16.3.190172.16.3.190
32172.16.3.191/32172.16.3.191 – 172.16.3.191172.16.3.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →