ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)172.16.3.0/24
network172.16.3.0/24
broadcast172.16.3.255
first host172.16.3.1
last host172.16.3.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classB
ipcalc 172.16.3.0/24
address10101100.00010000.00000011.00000000
subnet mask11111111.11111111.11111111.00000000
network10101100.00010000.00000011.00000000
broadcast10101100.00010000.00000011.11111111
green = network part, grey = host part
hex0xac100300
decimal2886730496
reverse dns0.3.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:300

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.3.0/29172.16.3.1 – 172.16.3.6172.16.3.7
2172.16.3.8/29172.16.3.9 – 172.16.3.14172.16.3.15
3172.16.3.16/29172.16.3.17 – 172.16.3.22172.16.3.23
4172.16.3.24/29172.16.3.25 – 172.16.3.30172.16.3.31
5172.16.3.32/29172.16.3.33 – 172.16.3.38172.16.3.39
6172.16.3.40/29172.16.3.41 – 172.16.3.46172.16.3.47
7172.16.3.48/29172.16.3.49 – 172.16.3.54172.16.3.55
8172.16.3.56/29172.16.3.57 – 172.16.3.62172.16.3.63
9172.16.3.64/29172.16.3.65 – 172.16.3.70172.16.3.71
10172.16.3.72/29172.16.3.73 – 172.16.3.78172.16.3.79
11172.16.3.80/29172.16.3.81 – 172.16.3.86172.16.3.87
12172.16.3.88/29172.16.3.89 – 172.16.3.94172.16.3.95
13172.16.3.96/29172.16.3.97 – 172.16.3.102172.16.3.103
14172.16.3.104/29172.16.3.105 – 172.16.3.110172.16.3.111
15172.16.3.112/29172.16.3.113 – 172.16.3.118172.16.3.119
16172.16.3.120/29172.16.3.121 – 172.16.3.126172.16.3.127
17172.16.3.128/29172.16.3.129 – 172.16.3.134172.16.3.135
18172.16.3.136/29172.16.3.137 – 172.16.3.142172.16.3.143
19172.16.3.144/29172.16.3.145 – 172.16.3.150172.16.3.151
20172.16.3.152/29172.16.3.153 – 172.16.3.158172.16.3.159
21172.16.3.160/29172.16.3.161 – 172.16.3.166172.16.3.167
22172.16.3.168/29172.16.3.169 – 172.16.3.174172.16.3.175
23172.16.3.176/29172.16.3.177 – 172.16.3.182172.16.3.183
24172.16.3.184/29172.16.3.185 – 172.16.3.190172.16.3.191
25172.16.3.192/29172.16.3.193 – 172.16.3.198172.16.3.199
26172.16.3.200/29172.16.3.201 – 172.16.3.206172.16.3.207
27172.16.3.208/29172.16.3.209 – 172.16.3.214172.16.3.215
28172.16.3.216/29172.16.3.217 – 172.16.3.222172.16.3.223
29172.16.3.224/29172.16.3.225 – 172.16.3.230172.16.3.231
30172.16.3.232/29172.16.3.233 – 172.16.3.238172.16.3.239
31172.16.3.240/29172.16.3.241 – 172.16.3.246172.16.3.247
32172.16.3.248/29172.16.3.249 – 172.16.3.254172.16.3.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →