ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)172.16.2.0/24
network172.16.2.0/24
broadcast172.16.2.255
first host172.16.2.1
last host172.16.2.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classB
ipcalc 172.16.2.0/24
address10101100.00010000.00000010.00000000
subnet mask11111111.11111111.11111111.00000000
network10101100.00010000.00000010.00000000
broadcast10101100.00010000.00000010.11111111
green = network part, grey = host part
hex0xac100200
decimal2886730240
reverse dns0.2.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:200

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.2.0/29172.16.2.1 – 172.16.2.6172.16.2.7
2172.16.2.8/29172.16.2.9 – 172.16.2.14172.16.2.15
3172.16.2.16/29172.16.2.17 – 172.16.2.22172.16.2.23
4172.16.2.24/29172.16.2.25 – 172.16.2.30172.16.2.31
5172.16.2.32/29172.16.2.33 – 172.16.2.38172.16.2.39
6172.16.2.40/29172.16.2.41 – 172.16.2.46172.16.2.47
7172.16.2.48/29172.16.2.49 – 172.16.2.54172.16.2.55
8172.16.2.56/29172.16.2.57 – 172.16.2.62172.16.2.63
9172.16.2.64/29172.16.2.65 – 172.16.2.70172.16.2.71
10172.16.2.72/29172.16.2.73 – 172.16.2.78172.16.2.79
11172.16.2.80/29172.16.2.81 – 172.16.2.86172.16.2.87
12172.16.2.88/29172.16.2.89 – 172.16.2.94172.16.2.95
13172.16.2.96/29172.16.2.97 – 172.16.2.102172.16.2.103
14172.16.2.104/29172.16.2.105 – 172.16.2.110172.16.2.111
15172.16.2.112/29172.16.2.113 – 172.16.2.118172.16.2.119
16172.16.2.120/29172.16.2.121 – 172.16.2.126172.16.2.127
17172.16.2.128/29172.16.2.129 – 172.16.2.134172.16.2.135
18172.16.2.136/29172.16.2.137 – 172.16.2.142172.16.2.143
19172.16.2.144/29172.16.2.145 – 172.16.2.150172.16.2.151
20172.16.2.152/29172.16.2.153 – 172.16.2.158172.16.2.159
21172.16.2.160/29172.16.2.161 – 172.16.2.166172.16.2.167
22172.16.2.168/29172.16.2.169 – 172.16.2.174172.16.2.175
23172.16.2.176/29172.16.2.177 – 172.16.2.182172.16.2.183
24172.16.2.184/29172.16.2.185 – 172.16.2.190172.16.2.191
25172.16.2.192/29172.16.2.193 – 172.16.2.198172.16.2.199
26172.16.2.200/29172.16.2.201 – 172.16.2.206172.16.2.207
27172.16.2.208/29172.16.2.209 – 172.16.2.214172.16.2.215
28172.16.2.216/29172.16.2.217 – 172.16.2.222172.16.2.223
29172.16.2.224/29172.16.2.225 – 172.16.2.230172.16.2.231
30172.16.2.232/29172.16.2.233 – 172.16.2.238172.16.2.239
31172.16.2.240/29172.16.2.241 – 172.16.2.246172.16.2.247
32172.16.2.248/29172.16.2.249 – 172.16.2.254172.16.2.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →