ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)172.16.14.0/26
network172.16.14.0/26
broadcast172.16.14.63
first host172.16.14.1
last host172.16.14.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classB
ipcalc 172.16.14.0/26
address10101100.00010000.00001110.00000000
subnet mask11111111.11111111.11111111.11000000
network10101100.00010000.00001110.00000000
broadcast10101100.00010000.00001110.00111111
green = network part, grey = host part
hex0xac100e00
decimal2886733312
reverse dns0.14.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:e00

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.14.0/31172.16.14.0 – 172.16.14.1172.16.14.1
2172.16.14.2/31172.16.14.2 – 172.16.14.3172.16.14.3
3172.16.14.4/31172.16.14.4 – 172.16.14.5172.16.14.5
4172.16.14.6/31172.16.14.6 – 172.16.14.7172.16.14.7
5172.16.14.8/31172.16.14.8 – 172.16.14.9172.16.14.9
6172.16.14.10/31172.16.14.10 – 172.16.14.11172.16.14.11
7172.16.14.12/31172.16.14.12 – 172.16.14.13172.16.14.13
8172.16.14.14/31172.16.14.14 – 172.16.14.15172.16.14.15
9172.16.14.16/31172.16.14.16 – 172.16.14.17172.16.14.17
10172.16.14.18/31172.16.14.18 – 172.16.14.19172.16.14.19
11172.16.14.20/31172.16.14.20 – 172.16.14.21172.16.14.21
12172.16.14.22/31172.16.14.22 – 172.16.14.23172.16.14.23
13172.16.14.24/31172.16.14.24 – 172.16.14.25172.16.14.25
14172.16.14.26/31172.16.14.26 – 172.16.14.27172.16.14.27
15172.16.14.28/31172.16.14.28 – 172.16.14.29172.16.14.29
16172.16.14.30/31172.16.14.30 – 172.16.14.31172.16.14.31
17172.16.14.32/31172.16.14.32 – 172.16.14.33172.16.14.33
18172.16.14.34/31172.16.14.34 – 172.16.14.35172.16.14.35
19172.16.14.36/31172.16.14.36 – 172.16.14.37172.16.14.37
20172.16.14.38/31172.16.14.38 – 172.16.14.39172.16.14.39
21172.16.14.40/31172.16.14.40 – 172.16.14.41172.16.14.41
22172.16.14.42/31172.16.14.42 – 172.16.14.43172.16.14.43
23172.16.14.44/31172.16.14.44 – 172.16.14.45172.16.14.45
24172.16.14.46/31172.16.14.46 – 172.16.14.47172.16.14.47
25172.16.14.48/31172.16.14.48 – 172.16.14.49172.16.14.49
26172.16.14.50/31172.16.14.50 – 172.16.14.51172.16.14.51
27172.16.14.52/31172.16.14.52 – 172.16.14.53172.16.14.53
28172.16.14.54/31172.16.14.54 – 172.16.14.55172.16.14.55
29172.16.14.56/31172.16.14.56 – 172.16.14.57172.16.14.57
30172.16.14.58/31172.16.14.58 – 172.16.14.59172.16.14.59
31172.16.14.60/31172.16.14.60 – 172.16.14.61172.16.14.61
32172.16.14.62/31172.16.14.62 – 172.16.14.63172.16.14.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →