ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)172.16.13.0/24
network172.16.13.0/24
broadcast172.16.13.255
first host172.16.13.1
last host172.16.13.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classB
ipcalc 172.16.13.0/24
address10101100.00010000.00001101.00000000
subnet mask11111111.11111111.11111111.00000000
network10101100.00010000.00001101.00000000
broadcast10101100.00010000.00001101.11111111
green = network part, grey = host part
hex0xac100d00
decimal2886733056
reverse dns0.13.16.172.in-addr.arpa
ipv4-mapped::ffff:ac10:d00

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
1172.16.13.0/29172.16.13.1 – 172.16.13.6172.16.13.7
2172.16.13.8/29172.16.13.9 – 172.16.13.14172.16.13.15
3172.16.13.16/29172.16.13.17 – 172.16.13.22172.16.13.23
4172.16.13.24/29172.16.13.25 – 172.16.13.30172.16.13.31
5172.16.13.32/29172.16.13.33 – 172.16.13.38172.16.13.39
6172.16.13.40/29172.16.13.41 – 172.16.13.46172.16.13.47
7172.16.13.48/29172.16.13.49 – 172.16.13.54172.16.13.55
8172.16.13.56/29172.16.13.57 – 172.16.13.62172.16.13.63
9172.16.13.64/29172.16.13.65 – 172.16.13.70172.16.13.71
10172.16.13.72/29172.16.13.73 – 172.16.13.78172.16.13.79
11172.16.13.80/29172.16.13.81 – 172.16.13.86172.16.13.87
12172.16.13.88/29172.16.13.89 – 172.16.13.94172.16.13.95
13172.16.13.96/29172.16.13.97 – 172.16.13.102172.16.13.103
14172.16.13.104/29172.16.13.105 – 172.16.13.110172.16.13.111
15172.16.13.112/29172.16.13.113 – 172.16.13.118172.16.13.119
16172.16.13.120/29172.16.13.121 – 172.16.13.126172.16.13.127
17172.16.13.128/29172.16.13.129 – 172.16.13.134172.16.13.135
18172.16.13.136/29172.16.13.137 – 172.16.13.142172.16.13.143
19172.16.13.144/29172.16.13.145 – 172.16.13.150172.16.13.151
20172.16.13.152/29172.16.13.153 – 172.16.13.158172.16.13.159
21172.16.13.160/29172.16.13.161 – 172.16.13.166172.16.13.167
22172.16.13.168/29172.16.13.169 – 172.16.13.174172.16.13.175
23172.16.13.176/29172.16.13.177 – 172.16.13.182172.16.13.183
24172.16.13.184/29172.16.13.185 – 172.16.13.190172.16.13.191
25172.16.13.192/29172.16.13.193 – 172.16.13.198172.16.13.199
26172.16.13.200/29172.16.13.201 – 172.16.13.206172.16.13.207
27172.16.13.208/29172.16.13.209 – 172.16.13.214172.16.13.215
28172.16.13.216/29172.16.13.217 – 172.16.13.222172.16.13.223
29172.16.13.224/29172.16.13.225 – 172.16.13.230172.16.13.231
30172.16.13.232/29172.16.13.233 – 172.16.13.238172.16.13.239
31172.16.13.240/29172.16.13.241 – 172.16.13.246172.16.13.247
32172.16.13.248/29172.16.13.249 – 172.16.13.254172.16.13.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →