ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.97.78.192/26
network10.97.78.192/26
broadcast10.97.78.255
first host10.97.78.193
last host10.97.78.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.97.78.192/26
address00001010.01100001.01001110.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01100001.01001110.11000000
broadcast00001010.01100001.01001110.11111111
green = network part, grey = host part
hex0x0a614ec0
decimal174149312
reverse dns192.78.97.10.in-addr.arpa
ipv4-mapped::ffff:a61:4ec0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.97.78.192/3210.97.78.192 – 10.97.78.19210.97.78.192
210.97.78.193/3210.97.78.193 – 10.97.78.19310.97.78.193
310.97.78.194/3210.97.78.194 – 10.97.78.19410.97.78.194
410.97.78.195/3210.97.78.195 – 10.97.78.19510.97.78.195
510.97.78.196/3210.97.78.196 – 10.97.78.19610.97.78.196
610.97.78.197/3210.97.78.197 – 10.97.78.19710.97.78.197
710.97.78.198/3210.97.78.198 – 10.97.78.19810.97.78.198
810.97.78.199/3210.97.78.199 – 10.97.78.19910.97.78.199
910.97.78.200/3210.97.78.200 – 10.97.78.20010.97.78.200
1010.97.78.201/3210.97.78.201 – 10.97.78.20110.97.78.201
1110.97.78.202/3210.97.78.202 – 10.97.78.20210.97.78.202
1210.97.78.203/3210.97.78.203 – 10.97.78.20310.97.78.203
1310.97.78.204/3210.97.78.204 – 10.97.78.20410.97.78.204
1410.97.78.205/3210.97.78.205 – 10.97.78.20510.97.78.205
1510.97.78.206/3210.97.78.206 – 10.97.78.20610.97.78.206
1610.97.78.207/3210.97.78.207 – 10.97.78.20710.97.78.207
1710.97.78.208/3210.97.78.208 – 10.97.78.20810.97.78.208
1810.97.78.209/3210.97.78.209 – 10.97.78.20910.97.78.209
1910.97.78.210/3210.97.78.210 – 10.97.78.21010.97.78.210
2010.97.78.211/3210.97.78.211 – 10.97.78.21110.97.78.211
2110.97.78.212/3210.97.78.212 – 10.97.78.21210.97.78.212
2210.97.78.213/3210.97.78.213 – 10.97.78.21310.97.78.213
2310.97.78.214/3210.97.78.214 – 10.97.78.21410.97.78.214
2410.97.78.215/3210.97.78.215 – 10.97.78.21510.97.78.215
2510.97.78.216/3210.97.78.216 – 10.97.78.21610.97.78.216
2610.97.78.217/3210.97.78.217 – 10.97.78.21710.97.78.217
2710.97.78.218/3210.97.78.218 – 10.97.78.21810.97.78.218
2810.97.78.219/3210.97.78.219 – 10.97.78.21910.97.78.219
2910.97.78.220/3210.97.78.220 – 10.97.78.22010.97.78.220
3010.97.78.221/3210.97.78.221 – 10.97.78.22110.97.78.221
3110.97.78.222/3210.97.78.222 – 10.97.78.22210.97.78.222
3210.97.78.223/3210.97.78.223 – 10.97.78.22310.97.78.223
3310.97.78.224/3210.97.78.224 – 10.97.78.22410.97.78.224
3410.97.78.225/3210.97.78.225 – 10.97.78.22510.97.78.225
3510.97.78.226/3210.97.78.226 – 10.97.78.22610.97.78.226
3610.97.78.227/3210.97.78.227 – 10.97.78.22710.97.78.227
3710.97.78.228/3210.97.78.228 – 10.97.78.22810.97.78.228
3810.97.78.229/3210.97.78.229 – 10.97.78.22910.97.78.229
3910.97.78.230/3210.97.78.230 – 10.97.78.23010.97.78.230
4010.97.78.231/3210.97.78.231 – 10.97.78.23110.97.78.231
4110.97.78.232/3210.97.78.232 – 10.97.78.23210.97.78.232
4210.97.78.233/3210.97.78.233 – 10.97.78.23310.97.78.233
4310.97.78.234/3210.97.78.234 – 10.97.78.23410.97.78.234
4410.97.78.235/3210.97.78.235 – 10.97.78.23510.97.78.235
4510.97.78.236/3210.97.78.236 – 10.97.78.23610.97.78.236
4610.97.78.237/3210.97.78.237 – 10.97.78.23710.97.78.237
4710.97.78.238/3210.97.78.238 – 10.97.78.23810.97.78.238
4810.97.78.239/3210.97.78.239 – 10.97.78.23910.97.78.239
4910.97.78.240/3210.97.78.240 – 10.97.78.24010.97.78.240
5010.97.78.241/3210.97.78.241 – 10.97.78.24110.97.78.241
5110.97.78.242/3210.97.78.242 – 10.97.78.24210.97.78.242
5210.97.78.243/3210.97.78.243 – 10.97.78.24310.97.78.243
5310.97.78.244/3210.97.78.244 – 10.97.78.24410.97.78.244
5410.97.78.245/3210.97.78.245 – 10.97.78.24510.97.78.245
5510.97.78.246/3210.97.78.246 – 10.97.78.24610.97.78.246
5610.97.78.247/3210.97.78.247 – 10.97.78.24710.97.78.247
5710.97.78.248/3210.97.78.248 – 10.97.78.24810.97.78.248
5810.97.78.249/3210.97.78.249 – 10.97.78.24910.97.78.249
5910.97.78.250/3210.97.78.250 – 10.97.78.25010.97.78.250
6010.97.78.251/3210.97.78.251 – 10.97.78.25110.97.78.251
6110.97.78.252/3210.97.78.252 – 10.97.78.25210.97.78.252
6210.97.78.253/3210.97.78.253 – 10.97.78.25310.97.78.253
6310.97.78.254/3210.97.78.254 – 10.97.78.25410.97.78.254
6410.97.78.255/3210.97.78.255 – 10.97.78.25510.97.78.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →