ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.92.84.0/22
network10.92.84.0/22
broadcast10.92.87.255
first host10.92.84.1
last host10.92.87.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.92.84.0/22
address00001010.01011100.01010100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01011100.01010100.00000000
broadcast00001010.01011100.01010111.11111111
green = network part, grey = host part
hex0x0a5c5400
decimal173822976
reverse dns0.84.92.10.in-addr.arpa
ipv4-mapped::ffff:a5c:5400

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.92.84.0/2810.92.84.1 – 10.92.84.1410.92.84.15
210.92.84.16/2810.92.84.17 – 10.92.84.3010.92.84.31
310.92.84.32/2810.92.84.33 – 10.92.84.4610.92.84.47
410.92.84.48/2810.92.84.49 – 10.92.84.6210.92.84.63
510.92.84.64/2810.92.84.65 – 10.92.84.7810.92.84.79
610.92.84.80/2810.92.84.81 – 10.92.84.9410.92.84.95
710.92.84.96/2810.92.84.97 – 10.92.84.11010.92.84.111
810.92.84.112/2810.92.84.113 – 10.92.84.12610.92.84.127
910.92.84.128/2810.92.84.129 – 10.92.84.14210.92.84.143
1010.92.84.144/2810.92.84.145 – 10.92.84.15810.92.84.159
1110.92.84.160/2810.92.84.161 – 10.92.84.17410.92.84.175
1210.92.84.176/2810.92.84.177 – 10.92.84.19010.92.84.191
1310.92.84.192/2810.92.84.193 – 10.92.84.20610.92.84.207
1410.92.84.208/2810.92.84.209 – 10.92.84.22210.92.84.223
1510.92.84.224/2810.92.84.225 – 10.92.84.23810.92.84.239
1610.92.84.240/2810.92.84.241 – 10.92.84.25410.92.84.255
1710.92.85.0/2810.92.85.1 – 10.92.85.1410.92.85.15
1810.92.85.16/2810.92.85.17 – 10.92.85.3010.92.85.31
1910.92.85.32/2810.92.85.33 – 10.92.85.4610.92.85.47
2010.92.85.48/2810.92.85.49 – 10.92.85.6210.92.85.63
2110.92.85.64/2810.92.85.65 – 10.92.85.7810.92.85.79
2210.92.85.80/2810.92.85.81 – 10.92.85.9410.92.85.95
2310.92.85.96/2810.92.85.97 – 10.92.85.11010.92.85.111
2410.92.85.112/2810.92.85.113 – 10.92.85.12610.92.85.127
2510.92.85.128/2810.92.85.129 – 10.92.85.14210.92.85.143
2610.92.85.144/2810.92.85.145 – 10.92.85.15810.92.85.159
2710.92.85.160/2810.92.85.161 – 10.92.85.17410.92.85.175
2810.92.85.176/2810.92.85.177 – 10.92.85.19010.92.85.191
2910.92.85.192/2810.92.85.193 – 10.92.85.20610.92.85.207
3010.92.85.208/2810.92.85.209 – 10.92.85.22210.92.85.223
3110.92.85.224/2810.92.85.225 – 10.92.85.23810.92.85.239
3210.92.85.240/2810.92.85.241 – 10.92.85.25410.92.85.255
3310.92.86.0/2810.92.86.1 – 10.92.86.1410.92.86.15
3410.92.86.16/2810.92.86.17 – 10.92.86.3010.92.86.31
3510.92.86.32/2810.92.86.33 – 10.92.86.4610.92.86.47
3610.92.86.48/2810.92.86.49 – 10.92.86.6210.92.86.63
3710.92.86.64/2810.92.86.65 – 10.92.86.7810.92.86.79
3810.92.86.80/2810.92.86.81 – 10.92.86.9410.92.86.95
3910.92.86.96/2810.92.86.97 – 10.92.86.11010.92.86.111
4010.92.86.112/2810.92.86.113 – 10.92.86.12610.92.86.127
4110.92.86.128/2810.92.86.129 – 10.92.86.14210.92.86.143
4210.92.86.144/2810.92.86.145 – 10.92.86.15810.92.86.159
4310.92.86.160/2810.92.86.161 – 10.92.86.17410.92.86.175
4410.92.86.176/2810.92.86.177 – 10.92.86.19010.92.86.191
4510.92.86.192/2810.92.86.193 – 10.92.86.20610.92.86.207
4610.92.86.208/2810.92.86.209 – 10.92.86.22210.92.86.223
4710.92.86.224/2810.92.86.225 – 10.92.86.23810.92.86.239
4810.92.86.240/2810.92.86.241 – 10.92.86.25410.92.86.255
4910.92.87.0/2810.92.87.1 – 10.92.87.1410.92.87.15
5010.92.87.16/2810.92.87.17 – 10.92.87.3010.92.87.31
5110.92.87.32/2810.92.87.33 – 10.92.87.4610.92.87.47
5210.92.87.48/2810.92.87.49 – 10.92.87.6210.92.87.63
5310.92.87.64/2810.92.87.65 – 10.92.87.7810.92.87.79
5410.92.87.80/2810.92.87.81 – 10.92.87.9410.92.87.95
5510.92.87.96/2810.92.87.97 – 10.92.87.11010.92.87.111
5610.92.87.112/2810.92.87.113 – 10.92.87.12610.92.87.127
5710.92.87.128/2810.92.87.129 – 10.92.87.14210.92.87.143
5810.92.87.144/2810.92.87.145 – 10.92.87.15810.92.87.159
5910.92.87.160/2810.92.87.161 – 10.92.87.17410.92.87.175
6010.92.87.176/2810.92.87.177 – 10.92.87.19010.92.87.191
6110.92.87.192/2810.92.87.193 – 10.92.87.20610.92.87.207
6210.92.87.208/2810.92.87.209 – 10.92.87.22210.92.87.223
6310.92.87.224/2810.92.87.225 – 10.92.87.23810.92.87.239
6410.92.87.240/2810.92.87.241 – 10.92.87.25410.92.87.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →