ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.92.44.0/22
network10.92.44.0/22
broadcast10.92.47.255
first host10.92.44.1
last host10.92.47.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.92.44.0/22
address00001010.01011100.00101100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01011100.00101100.00000000
broadcast00001010.01011100.00101111.11111111
green = network part, grey = host part
hex0x0a5c2c00
decimal173812736
reverse dns0.44.92.10.in-addr.arpa
ipv4-mapped::ffff:a5c:2c00

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.92.44.0/2810.92.44.1 – 10.92.44.1410.92.44.15
210.92.44.16/2810.92.44.17 – 10.92.44.3010.92.44.31
310.92.44.32/2810.92.44.33 – 10.92.44.4610.92.44.47
410.92.44.48/2810.92.44.49 – 10.92.44.6210.92.44.63
510.92.44.64/2810.92.44.65 – 10.92.44.7810.92.44.79
610.92.44.80/2810.92.44.81 – 10.92.44.9410.92.44.95
710.92.44.96/2810.92.44.97 – 10.92.44.11010.92.44.111
810.92.44.112/2810.92.44.113 – 10.92.44.12610.92.44.127
910.92.44.128/2810.92.44.129 – 10.92.44.14210.92.44.143
1010.92.44.144/2810.92.44.145 – 10.92.44.15810.92.44.159
1110.92.44.160/2810.92.44.161 – 10.92.44.17410.92.44.175
1210.92.44.176/2810.92.44.177 – 10.92.44.19010.92.44.191
1310.92.44.192/2810.92.44.193 – 10.92.44.20610.92.44.207
1410.92.44.208/2810.92.44.209 – 10.92.44.22210.92.44.223
1510.92.44.224/2810.92.44.225 – 10.92.44.23810.92.44.239
1610.92.44.240/2810.92.44.241 – 10.92.44.25410.92.44.255
1710.92.45.0/2810.92.45.1 – 10.92.45.1410.92.45.15
1810.92.45.16/2810.92.45.17 – 10.92.45.3010.92.45.31
1910.92.45.32/2810.92.45.33 – 10.92.45.4610.92.45.47
2010.92.45.48/2810.92.45.49 – 10.92.45.6210.92.45.63
2110.92.45.64/2810.92.45.65 – 10.92.45.7810.92.45.79
2210.92.45.80/2810.92.45.81 – 10.92.45.9410.92.45.95
2310.92.45.96/2810.92.45.97 – 10.92.45.11010.92.45.111
2410.92.45.112/2810.92.45.113 – 10.92.45.12610.92.45.127
2510.92.45.128/2810.92.45.129 – 10.92.45.14210.92.45.143
2610.92.45.144/2810.92.45.145 – 10.92.45.15810.92.45.159
2710.92.45.160/2810.92.45.161 – 10.92.45.17410.92.45.175
2810.92.45.176/2810.92.45.177 – 10.92.45.19010.92.45.191
2910.92.45.192/2810.92.45.193 – 10.92.45.20610.92.45.207
3010.92.45.208/2810.92.45.209 – 10.92.45.22210.92.45.223
3110.92.45.224/2810.92.45.225 – 10.92.45.23810.92.45.239
3210.92.45.240/2810.92.45.241 – 10.92.45.25410.92.45.255
3310.92.46.0/2810.92.46.1 – 10.92.46.1410.92.46.15
3410.92.46.16/2810.92.46.17 – 10.92.46.3010.92.46.31
3510.92.46.32/2810.92.46.33 – 10.92.46.4610.92.46.47
3610.92.46.48/2810.92.46.49 – 10.92.46.6210.92.46.63
3710.92.46.64/2810.92.46.65 – 10.92.46.7810.92.46.79
3810.92.46.80/2810.92.46.81 – 10.92.46.9410.92.46.95
3910.92.46.96/2810.92.46.97 – 10.92.46.11010.92.46.111
4010.92.46.112/2810.92.46.113 – 10.92.46.12610.92.46.127
4110.92.46.128/2810.92.46.129 – 10.92.46.14210.92.46.143
4210.92.46.144/2810.92.46.145 – 10.92.46.15810.92.46.159
4310.92.46.160/2810.92.46.161 – 10.92.46.17410.92.46.175
4410.92.46.176/2810.92.46.177 – 10.92.46.19010.92.46.191
4510.92.46.192/2810.92.46.193 – 10.92.46.20610.92.46.207
4610.92.46.208/2810.92.46.209 – 10.92.46.22210.92.46.223
4710.92.46.224/2810.92.46.225 – 10.92.46.23810.92.46.239
4810.92.46.240/2810.92.46.241 – 10.92.46.25410.92.46.255
4910.92.47.0/2810.92.47.1 – 10.92.47.1410.92.47.15
5010.92.47.16/2810.92.47.17 – 10.92.47.3010.92.47.31
5110.92.47.32/2810.92.47.33 – 10.92.47.4610.92.47.47
5210.92.47.48/2810.92.47.49 – 10.92.47.6210.92.47.63
5310.92.47.64/2810.92.47.65 – 10.92.47.7810.92.47.79
5410.92.47.80/2810.92.47.81 – 10.92.47.9410.92.47.95
5510.92.47.96/2810.92.47.97 – 10.92.47.11010.92.47.111
5610.92.47.112/2810.92.47.113 – 10.92.47.12610.92.47.127
5710.92.47.128/2810.92.47.129 – 10.92.47.14210.92.47.143
5810.92.47.144/2810.92.47.145 – 10.92.47.15810.92.47.159
5910.92.47.160/2810.92.47.161 – 10.92.47.17410.92.47.175
6010.92.47.176/2810.92.47.177 – 10.92.47.19010.92.47.191
6110.92.47.192/2810.92.47.193 – 10.92.47.20610.92.47.207
6210.92.47.208/2810.92.47.209 – 10.92.47.22210.92.47.223
6310.92.47.224/2810.92.47.225 – 10.92.47.23810.92.47.239
6410.92.47.240/2810.92.47.241 – 10.92.47.25410.92.47.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →