ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.90.0.0/15
network10.90.0.0/15
broadcast10.91.255.255
first host10.90.0.1
last host10.91.255.254
subnet mask255.254.0.0
wildcard0.1.255.255
addresses131,072
usable hosts131,070
classA
ipcalc 10.90.0.0/15
address00001010.01011010.00000000.00000000
subnet mask11111111.11111110.00000000.00000000
network00001010.01011010.00000000.00000000
broadcast00001010.01011011.11111111.11111111
green = network part, grey = host part
hex0x0a5a0000
decimal173670400
reverse dns0.0.90.10.in-addr.arpa
ipv4-mapped::ffff:a5a:0

/15 split into /21 · 64 subnets

close ×
#networkhost rangebroadcast
110.90.0.0/2110.90.0.1 – 10.90.7.25410.90.7.255
210.90.8.0/2110.90.8.1 – 10.90.15.25410.90.15.255
310.90.16.0/2110.90.16.1 – 10.90.23.25410.90.23.255
410.90.24.0/2110.90.24.1 – 10.90.31.25410.90.31.255
510.90.32.0/2110.90.32.1 – 10.90.39.25410.90.39.255
610.90.40.0/2110.90.40.1 – 10.90.47.25410.90.47.255
710.90.48.0/2110.90.48.1 – 10.90.55.25410.90.55.255
810.90.56.0/2110.90.56.1 – 10.90.63.25410.90.63.255
910.90.64.0/2110.90.64.1 – 10.90.71.25410.90.71.255
1010.90.72.0/2110.90.72.1 – 10.90.79.25410.90.79.255
1110.90.80.0/2110.90.80.1 – 10.90.87.25410.90.87.255
1210.90.88.0/2110.90.88.1 – 10.90.95.25410.90.95.255
1310.90.96.0/2110.90.96.1 – 10.90.103.25410.90.103.255
1410.90.104.0/2110.90.104.1 – 10.90.111.25410.90.111.255
1510.90.112.0/2110.90.112.1 – 10.90.119.25410.90.119.255
1610.90.120.0/2110.90.120.1 – 10.90.127.25410.90.127.255
1710.90.128.0/2110.90.128.1 – 10.90.135.25410.90.135.255
1810.90.136.0/2110.90.136.1 – 10.90.143.25410.90.143.255
1910.90.144.0/2110.90.144.1 – 10.90.151.25410.90.151.255
2010.90.152.0/2110.90.152.1 – 10.90.159.25410.90.159.255
2110.90.160.0/2110.90.160.1 – 10.90.167.25410.90.167.255
2210.90.168.0/2110.90.168.1 – 10.90.175.25410.90.175.255
2310.90.176.0/2110.90.176.1 – 10.90.183.25410.90.183.255
2410.90.184.0/2110.90.184.1 – 10.90.191.25410.90.191.255
2510.90.192.0/2110.90.192.1 – 10.90.199.25410.90.199.255
2610.90.200.0/2110.90.200.1 – 10.90.207.25410.90.207.255
2710.90.208.0/2110.90.208.1 – 10.90.215.25410.90.215.255
2810.90.216.0/2110.90.216.1 – 10.90.223.25410.90.223.255
2910.90.224.0/2110.90.224.1 – 10.90.231.25410.90.231.255
3010.90.232.0/2110.90.232.1 – 10.90.239.25410.90.239.255
3110.90.240.0/2110.90.240.1 – 10.90.247.25410.90.247.255
3210.90.248.0/2110.90.248.1 – 10.90.255.25410.90.255.255
3310.91.0.0/2110.91.0.1 – 10.91.7.25410.91.7.255
3410.91.8.0/2110.91.8.1 – 10.91.15.25410.91.15.255
3510.91.16.0/2110.91.16.1 – 10.91.23.25410.91.23.255
3610.91.24.0/2110.91.24.1 – 10.91.31.25410.91.31.255
3710.91.32.0/2110.91.32.1 – 10.91.39.25410.91.39.255
3810.91.40.0/2110.91.40.1 – 10.91.47.25410.91.47.255
3910.91.48.0/2110.91.48.1 – 10.91.55.25410.91.55.255
4010.91.56.0/2110.91.56.1 – 10.91.63.25410.91.63.255
4110.91.64.0/2110.91.64.1 – 10.91.71.25410.91.71.255
4210.91.72.0/2110.91.72.1 – 10.91.79.25410.91.79.255
4310.91.80.0/2110.91.80.1 – 10.91.87.25410.91.87.255
4410.91.88.0/2110.91.88.1 – 10.91.95.25410.91.95.255
4510.91.96.0/2110.91.96.1 – 10.91.103.25410.91.103.255
4610.91.104.0/2110.91.104.1 – 10.91.111.25410.91.111.255
4710.91.112.0/2110.91.112.1 – 10.91.119.25410.91.119.255
4810.91.120.0/2110.91.120.1 – 10.91.127.25410.91.127.255
4910.91.128.0/2110.91.128.1 – 10.91.135.25410.91.135.255
5010.91.136.0/2110.91.136.1 – 10.91.143.25410.91.143.255
5110.91.144.0/2110.91.144.1 – 10.91.151.25410.91.151.255
5210.91.152.0/2110.91.152.1 – 10.91.159.25410.91.159.255
5310.91.160.0/2110.91.160.1 – 10.91.167.25410.91.167.255
5410.91.168.0/2110.91.168.1 – 10.91.175.25410.91.175.255
5510.91.176.0/2110.91.176.1 – 10.91.183.25410.91.183.255
5610.91.184.0/2110.91.184.1 – 10.91.191.25410.91.191.255
5710.91.192.0/2110.91.192.1 – 10.91.199.25410.91.199.255
5810.91.200.0/2110.91.200.1 – 10.91.207.25410.91.207.255
5910.91.208.0/2110.91.208.1 – 10.91.215.25410.91.215.255
6010.91.216.0/2110.91.216.1 – 10.91.223.25410.91.223.255
6110.91.224.0/2110.91.224.1 – 10.91.231.25410.91.231.255
6210.91.232.0/2110.91.232.1 – 10.91.239.25410.91.239.255
6310.91.240.0/2110.91.240.1 – 10.91.247.25410.91.247.255
6410.91.248.0/2110.91.248.1 – 10.91.255.25410.91.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /15
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,0701
/16255.255.0.065,53665,5342 split →
/17255.255.128.032,76832,7664 split →
/18255.255.192.016,38416,3828 split →
/19255.255.224.08,1928,19016 split →
/20255.255.240.04,0964,09432 split →
/21255.255.248.02,0482,04664 split →
/22255.255.252.01,0241,022128 split →
/23255.255.254.0512510256 split →
/24255.255.255.0256254512 split →
/25255.255.255.1281281261,024 split →
/26255.255.255.19264622,048 split →
/27255.255.255.22432304,096 split →
/28255.255.255.24016148,192 split →
/29255.255.255.2488616,384 split →
/30255.255.255.2524232,768 split →
/31255.255.255.2542265,536 split →
/32255.255.255.25511131,072 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →