ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.89.128.0/17
network10.89.128.0/17
broadcast10.89.255.255
first host10.89.128.1
last host10.89.255.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.89.128.0/17
address00001010.01011001.10000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.01011001.10000000.00000000
broadcast00001010.01011001.11111111.11111111
green = network part, grey = host part
hex0x0a598000
decimal173637632
reverse dns0.128.89.10.in-addr.arpa
ipv4-mapped::ffff:a59:8000

/17 split into /23 · 64 subnets

close ×
#networkhost rangebroadcast
110.89.128.0/2310.89.128.1 – 10.89.129.25410.89.129.255
210.89.130.0/2310.89.130.1 – 10.89.131.25410.89.131.255
310.89.132.0/2310.89.132.1 – 10.89.133.25410.89.133.255
410.89.134.0/2310.89.134.1 – 10.89.135.25410.89.135.255
510.89.136.0/2310.89.136.1 – 10.89.137.25410.89.137.255
610.89.138.0/2310.89.138.1 – 10.89.139.25410.89.139.255
710.89.140.0/2310.89.140.1 – 10.89.141.25410.89.141.255
810.89.142.0/2310.89.142.1 – 10.89.143.25410.89.143.255
910.89.144.0/2310.89.144.1 – 10.89.145.25410.89.145.255
1010.89.146.0/2310.89.146.1 – 10.89.147.25410.89.147.255
1110.89.148.0/2310.89.148.1 – 10.89.149.25410.89.149.255
1210.89.150.0/2310.89.150.1 – 10.89.151.25410.89.151.255
1310.89.152.0/2310.89.152.1 – 10.89.153.25410.89.153.255
1410.89.154.0/2310.89.154.1 – 10.89.155.25410.89.155.255
1510.89.156.0/2310.89.156.1 – 10.89.157.25410.89.157.255
1610.89.158.0/2310.89.158.1 – 10.89.159.25410.89.159.255
1710.89.160.0/2310.89.160.1 – 10.89.161.25410.89.161.255
1810.89.162.0/2310.89.162.1 – 10.89.163.25410.89.163.255
1910.89.164.0/2310.89.164.1 – 10.89.165.25410.89.165.255
2010.89.166.0/2310.89.166.1 – 10.89.167.25410.89.167.255
2110.89.168.0/2310.89.168.1 – 10.89.169.25410.89.169.255
2210.89.170.0/2310.89.170.1 – 10.89.171.25410.89.171.255
2310.89.172.0/2310.89.172.1 – 10.89.173.25410.89.173.255
2410.89.174.0/2310.89.174.1 – 10.89.175.25410.89.175.255
2510.89.176.0/2310.89.176.1 – 10.89.177.25410.89.177.255
2610.89.178.0/2310.89.178.1 – 10.89.179.25410.89.179.255
2710.89.180.0/2310.89.180.1 – 10.89.181.25410.89.181.255
2810.89.182.0/2310.89.182.1 – 10.89.183.25410.89.183.255
2910.89.184.0/2310.89.184.1 – 10.89.185.25410.89.185.255
3010.89.186.0/2310.89.186.1 – 10.89.187.25410.89.187.255
3110.89.188.0/2310.89.188.1 – 10.89.189.25410.89.189.255
3210.89.190.0/2310.89.190.1 – 10.89.191.25410.89.191.255
3310.89.192.0/2310.89.192.1 – 10.89.193.25410.89.193.255
3410.89.194.0/2310.89.194.1 – 10.89.195.25410.89.195.255
3510.89.196.0/2310.89.196.1 – 10.89.197.25410.89.197.255
3610.89.198.0/2310.89.198.1 – 10.89.199.25410.89.199.255
3710.89.200.0/2310.89.200.1 – 10.89.201.25410.89.201.255
3810.89.202.0/2310.89.202.1 – 10.89.203.25410.89.203.255
3910.89.204.0/2310.89.204.1 – 10.89.205.25410.89.205.255
4010.89.206.0/2310.89.206.1 – 10.89.207.25410.89.207.255
4110.89.208.0/2310.89.208.1 – 10.89.209.25410.89.209.255
4210.89.210.0/2310.89.210.1 – 10.89.211.25410.89.211.255
4310.89.212.0/2310.89.212.1 – 10.89.213.25410.89.213.255
4410.89.214.0/2310.89.214.1 – 10.89.215.25410.89.215.255
4510.89.216.0/2310.89.216.1 – 10.89.217.25410.89.217.255
4610.89.218.0/2310.89.218.1 – 10.89.219.25410.89.219.255
4710.89.220.0/2310.89.220.1 – 10.89.221.25410.89.221.255
4810.89.222.0/2310.89.222.1 – 10.89.223.25410.89.223.255
4910.89.224.0/2310.89.224.1 – 10.89.225.25410.89.225.255
5010.89.226.0/2310.89.226.1 – 10.89.227.25410.89.227.255
5110.89.228.0/2310.89.228.1 – 10.89.229.25410.89.229.255
5210.89.230.0/2310.89.230.1 – 10.89.231.25410.89.231.255
5310.89.232.0/2310.89.232.1 – 10.89.233.25410.89.233.255
5410.89.234.0/2310.89.234.1 – 10.89.235.25410.89.235.255
5510.89.236.0/2310.89.236.1 – 10.89.237.25410.89.237.255
5610.89.238.0/2310.89.238.1 – 10.89.239.25410.89.239.255
5710.89.240.0/2310.89.240.1 – 10.89.241.25410.89.241.255
5810.89.242.0/2310.89.242.1 – 10.89.243.25410.89.243.255
5910.89.244.0/2310.89.244.1 – 10.89.245.25410.89.245.255
6010.89.246.0/2310.89.246.1 – 10.89.247.25410.89.247.255
6110.89.248.0/2310.89.248.1 – 10.89.249.25410.89.249.255
6210.89.250.0/2310.89.250.1 – 10.89.251.25410.89.251.255
6310.89.252.0/2310.89.252.1 – 10.89.253.25410.89.253.255
6410.89.254.0/2310.89.254.1 – 10.89.255.25410.89.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /17
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,7661
/18255.255.192.016,38416,3822 split →
/19255.255.224.08,1928,1904 split →
/20255.255.240.04,0964,0948 split →
/21255.255.248.02,0482,04616 split →
/22255.255.252.01,0241,02232 split →
/23255.255.254.051251064 split →
/24255.255.255.0256254128 split →
/25255.255.255.128128126256 split →
/26255.255.255.1926462512 split →
/27255.255.255.22432301,024 split →
/28255.255.255.24016142,048 split →
/29255.255.255.248864,096 split →
/30255.255.255.252428,192 split →
/31255.255.255.2542216,384 split →
/32255.255.255.2551132,768 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →