ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.88.128.0/17
network10.88.128.0/17
broadcast10.88.255.255
first host10.88.128.1
last host10.88.255.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.88.128.0/17
address00001010.01011000.10000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.01011000.10000000.00000000
broadcast00001010.01011000.11111111.11111111
green = network part, grey = host part
hex0x0a588000
decimal173572096
reverse dns0.128.88.10.in-addr.arpa
ipv4-mapped::ffff:a58:8000

/17 split into /22 · 32 subnets

close ×
#networkhost rangebroadcast
110.88.128.0/2210.88.128.1 – 10.88.131.25410.88.131.255
210.88.132.0/2210.88.132.1 – 10.88.135.25410.88.135.255
310.88.136.0/2210.88.136.1 – 10.88.139.25410.88.139.255
410.88.140.0/2210.88.140.1 – 10.88.143.25410.88.143.255
510.88.144.0/2210.88.144.1 – 10.88.147.25410.88.147.255
610.88.148.0/2210.88.148.1 – 10.88.151.25410.88.151.255
710.88.152.0/2210.88.152.1 – 10.88.155.25410.88.155.255
810.88.156.0/2210.88.156.1 – 10.88.159.25410.88.159.255
910.88.160.0/2210.88.160.1 – 10.88.163.25410.88.163.255
1010.88.164.0/2210.88.164.1 – 10.88.167.25410.88.167.255
1110.88.168.0/2210.88.168.1 – 10.88.171.25410.88.171.255
1210.88.172.0/2210.88.172.1 – 10.88.175.25410.88.175.255
1310.88.176.0/2210.88.176.1 – 10.88.179.25410.88.179.255
1410.88.180.0/2210.88.180.1 – 10.88.183.25410.88.183.255
1510.88.184.0/2210.88.184.1 – 10.88.187.25410.88.187.255
1610.88.188.0/2210.88.188.1 – 10.88.191.25410.88.191.255
1710.88.192.0/2210.88.192.1 – 10.88.195.25410.88.195.255
1810.88.196.0/2210.88.196.1 – 10.88.199.25410.88.199.255
1910.88.200.0/2210.88.200.1 – 10.88.203.25410.88.203.255
2010.88.204.0/2210.88.204.1 – 10.88.207.25410.88.207.255
2110.88.208.0/2210.88.208.1 – 10.88.211.25410.88.211.255
2210.88.212.0/2210.88.212.1 – 10.88.215.25410.88.215.255
2310.88.216.0/2210.88.216.1 – 10.88.219.25410.88.219.255
2410.88.220.0/2210.88.220.1 – 10.88.223.25410.88.223.255
2510.88.224.0/2210.88.224.1 – 10.88.227.25410.88.227.255
2610.88.228.0/2210.88.228.1 – 10.88.231.25410.88.231.255
2710.88.232.0/2210.88.232.1 – 10.88.235.25410.88.235.255
2810.88.236.0/2210.88.236.1 – 10.88.239.25410.88.239.255
2910.88.240.0/2210.88.240.1 – 10.88.243.25410.88.243.255
3010.88.244.0/2210.88.244.1 – 10.88.247.25410.88.247.255
3110.88.248.0/2210.88.248.1 – 10.88.251.25410.88.251.255
3210.88.252.0/2210.88.252.1 – 10.88.255.25410.88.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /17
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,7661
/18255.255.192.016,38416,3822 split →
/19255.255.224.08,1928,1904 split →
/20255.255.240.04,0964,0948 split →
/21255.255.248.02,0482,04616 split →
/22255.255.252.01,0241,02232 split →
/23255.255.254.051251064 split →
/24255.255.255.0256254128 split →
/25255.255.255.128128126256 split →
/26255.255.255.1926462512 split →
/27255.255.255.22432301,024 split →
/28255.255.255.24016142,048 split →
/29255.255.255.248864,096 split →
/30255.255.255.252428,192 split →
/31255.255.255.2542216,384 split →
/32255.255.255.2551132,768 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →