ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.87.136.0/24
network10.87.136.0/24
broadcast10.87.136.255
first host10.87.136.1
last host10.87.136.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.87.136.0/24
address00001010.01010111.10001000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01010111.10001000.00000000
broadcast00001010.01010111.10001000.11111111
green = network part, grey = host part
hex0x0a578800
decimal173508608
reverse dns0.136.87.10.in-addr.arpa
ipv4-mapped::ffff:a57:8800

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.87.136.0/3010.87.136.1 – 10.87.136.210.87.136.3
210.87.136.4/3010.87.136.5 – 10.87.136.610.87.136.7
310.87.136.8/3010.87.136.9 – 10.87.136.1010.87.136.11
410.87.136.12/3010.87.136.13 – 10.87.136.1410.87.136.15
510.87.136.16/3010.87.136.17 – 10.87.136.1810.87.136.19
610.87.136.20/3010.87.136.21 – 10.87.136.2210.87.136.23
710.87.136.24/3010.87.136.25 – 10.87.136.2610.87.136.27
810.87.136.28/3010.87.136.29 – 10.87.136.3010.87.136.31
910.87.136.32/3010.87.136.33 – 10.87.136.3410.87.136.35
1010.87.136.36/3010.87.136.37 – 10.87.136.3810.87.136.39
1110.87.136.40/3010.87.136.41 – 10.87.136.4210.87.136.43
1210.87.136.44/3010.87.136.45 – 10.87.136.4610.87.136.47
1310.87.136.48/3010.87.136.49 – 10.87.136.5010.87.136.51
1410.87.136.52/3010.87.136.53 – 10.87.136.5410.87.136.55
1510.87.136.56/3010.87.136.57 – 10.87.136.5810.87.136.59
1610.87.136.60/3010.87.136.61 – 10.87.136.6210.87.136.63
1710.87.136.64/3010.87.136.65 – 10.87.136.6610.87.136.67
1810.87.136.68/3010.87.136.69 – 10.87.136.7010.87.136.71
1910.87.136.72/3010.87.136.73 – 10.87.136.7410.87.136.75
2010.87.136.76/3010.87.136.77 – 10.87.136.7810.87.136.79
2110.87.136.80/3010.87.136.81 – 10.87.136.8210.87.136.83
2210.87.136.84/3010.87.136.85 – 10.87.136.8610.87.136.87
2310.87.136.88/3010.87.136.89 – 10.87.136.9010.87.136.91
2410.87.136.92/3010.87.136.93 – 10.87.136.9410.87.136.95
2510.87.136.96/3010.87.136.97 – 10.87.136.9810.87.136.99
2610.87.136.100/3010.87.136.101 – 10.87.136.10210.87.136.103
2710.87.136.104/3010.87.136.105 – 10.87.136.10610.87.136.107
2810.87.136.108/3010.87.136.109 – 10.87.136.11010.87.136.111
2910.87.136.112/3010.87.136.113 – 10.87.136.11410.87.136.115
3010.87.136.116/3010.87.136.117 – 10.87.136.11810.87.136.119
3110.87.136.120/3010.87.136.121 – 10.87.136.12210.87.136.123
3210.87.136.124/3010.87.136.125 – 10.87.136.12610.87.136.127
3310.87.136.128/3010.87.136.129 – 10.87.136.13010.87.136.131
3410.87.136.132/3010.87.136.133 – 10.87.136.13410.87.136.135
3510.87.136.136/3010.87.136.137 – 10.87.136.13810.87.136.139
3610.87.136.140/3010.87.136.141 – 10.87.136.14210.87.136.143
3710.87.136.144/3010.87.136.145 – 10.87.136.14610.87.136.147
3810.87.136.148/3010.87.136.149 – 10.87.136.15010.87.136.151
3910.87.136.152/3010.87.136.153 – 10.87.136.15410.87.136.155
4010.87.136.156/3010.87.136.157 – 10.87.136.15810.87.136.159
4110.87.136.160/3010.87.136.161 – 10.87.136.16210.87.136.163
4210.87.136.164/3010.87.136.165 – 10.87.136.16610.87.136.167
4310.87.136.168/3010.87.136.169 – 10.87.136.17010.87.136.171
4410.87.136.172/3010.87.136.173 – 10.87.136.17410.87.136.175
4510.87.136.176/3010.87.136.177 – 10.87.136.17810.87.136.179
4610.87.136.180/3010.87.136.181 – 10.87.136.18210.87.136.183
4710.87.136.184/3010.87.136.185 – 10.87.136.18610.87.136.187
4810.87.136.188/3010.87.136.189 – 10.87.136.19010.87.136.191
4910.87.136.192/3010.87.136.193 – 10.87.136.19410.87.136.195
5010.87.136.196/3010.87.136.197 – 10.87.136.19810.87.136.199
5110.87.136.200/3010.87.136.201 – 10.87.136.20210.87.136.203
5210.87.136.204/3010.87.136.205 – 10.87.136.20610.87.136.207
5310.87.136.208/3010.87.136.209 – 10.87.136.21010.87.136.211
5410.87.136.212/3010.87.136.213 – 10.87.136.21410.87.136.215
5510.87.136.216/3010.87.136.217 – 10.87.136.21810.87.136.219
5610.87.136.220/3010.87.136.221 – 10.87.136.22210.87.136.223
5710.87.136.224/3010.87.136.225 – 10.87.136.22610.87.136.227
5810.87.136.228/3010.87.136.229 – 10.87.136.23010.87.136.231
5910.87.136.232/3010.87.136.233 – 10.87.136.23410.87.136.235
6010.87.136.236/3010.87.136.237 – 10.87.136.23810.87.136.239
6110.87.136.240/3010.87.136.241 – 10.87.136.24210.87.136.243
6210.87.136.244/3010.87.136.245 – 10.87.136.24610.87.136.247
6310.87.136.248/3010.87.136.249 – 10.87.136.25010.87.136.251
6410.87.136.252/3010.87.136.253 – 10.87.136.25410.87.136.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →