ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.80.26.0/24
network10.80.26.0/24
broadcast10.80.26.255
first host10.80.26.1
last host10.80.26.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.80.26.0/24
address00001010.01010000.00011010.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01010000.00011010.00000000
broadcast00001010.01010000.00011010.11111111
green = network part, grey = host part
hex0x0a501a00
decimal173021696
reverse dns0.26.80.10.in-addr.arpa
ipv4-mapped::ffff:a50:1a00

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.80.26.0/2910.80.26.1 – 10.80.26.610.80.26.7
210.80.26.8/2910.80.26.9 – 10.80.26.1410.80.26.15
310.80.26.16/2910.80.26.17 – 10.80.26.2210.80.26.23
410.80.26.24/2910.80.26.25 – 10.80.26.3010.80.26.31
510.80.26.32/2910.80.26.33 – 10.80.26.3810.80.26.39
610.80.26.40/2910.80.26.41 – 10.80.26.4610.80.26.47
710.80.26.48/2910.80.26.49 – 10.80.26.5410.80.26.55
810.80.26.56/2910.80.26.57 – 10.80.26.6210.80.26.63
910.80.26.64/2910.80.26.65 – 10.80.26.7010.80.26.71
1010.80.26.72/2910.80.26.73 – 10.80.26.7810.80.26.79
1110.80.26.80/2910.80.26.81 – 10.80.26.8610.80.26.87
1210.80.26.88/2910.80.26.89 – 10.80.26.9410.80.26.95
1310.80.26.96/2910.80.26.97 – 10.80.26.10210.80.26.103
1410.80.26.104/2910.80.26.105 – 10.80.26.11010.80.26.111
1510.80.26.112/2910.80.26.113 – 10.80.26.11810.80.26.119
1610.80.26.120/2910.80.26.121 – 10.80.26.12610.80.26.127
1710.80.26.128/2910.80.26.129 – 10.80.26.13410.80.26.135
1810.80.26.136/2910.80.26.137 – 10.80.26.14210.80.26.143
1910.80.26.144/2910.80.26.145 – 10.80.26.15010.80.26.151
2010.80.26.152/2910.80.26.153 – 10.80.26.15810.80.26.159
2110.80.26.160/2910.80.26.161 – 10.80.26.16610.80.26.167
2210.80.26.168/2910.80.26.169 – 10.80.26.17410.80.26.175
2310.80.26.176/2910.80.26.177 – 10.80.26.18210.80.26.183
2410.80.26.184/2910.80.26.185 – 10.80.26.19010.80.26.191
2510.80.26.192/2910.80.26.193 – 10.80.26.19810.80.26.199
2610.80.26.200/2910.80.26.201 – 10.80.26.20610.80.26.207
2710.80.26.208/2910.80.26.209 – 10.80.26.21410.80.26.215
2810.80.26.216/2910.80.26.217 – 10.80.26.22210.80.26.223
2910.80.26.224/2910.80.26.225 – 10.80.26.23010.80.26.231
3010.80.26.232/2910.80.26.233 – 10.80.26.23810.80.26.239
3110.80.26.240/2910.80.26.241 – 10.80.26.24610.80.26.247
3210.80.26.248/2910.80.26.249 – 10.80.26.25410.80.26.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →