ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.80.158.0/24
network10.80.158.0/24
broadcast10.80.158.255
first host10.80.158.1
last host10.80.158.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.80.158.0/24
address00001010.01010000.10011110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01010000.10011110.00000000
broadcast00001010.01010000.10011110.11111111
green = network part, grey = host part
hex0x0a509e00
decimal173055488
reverse dns0.158.80.10.in-addr.arpa
ipv4-mapped::ffff:a50:9e00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.80.158.0/3010.80.158.1 – 10.80.158.210.80.158.3
210.80.158.4/3010.80.158.5 – 10.80.158.610.80.158.7
310.80.158.8/3010.80.158.9 – 10.80.158.1010.80.158.11
410.80.158.12/3010.80.158.13 – 10.80.158.1410.80.158.15
510.80.158.16/3010.80.158.17 – 10.80.158.1810.80.158.19
610.80.158.20/3010.80.158.21 – 10.80.158.2210.80.158.23
710.80.158.24/3010.80.158.25 – 10.80.158.2610.80.158.27
810.80.158.28/3010.80.158.29 – 10.80.158.3010.80.158.31
910.80.158.32/3010.80.158.33 – 10.80.158.3410.80.158.35
1010.80.158.36/3010.80.158.37 – 10.80.158.3810.80.158.39
1110.80.158.40/3010.80.158.41 – 10.80.158.4210.80.158.43
1210.80.158.44/3010.80.158.45 – 10.80.158.4610.80.158.47
1310.80.158.48/3010.80.158.49 – 10.80.158.5010.80.158.51
1410.80.158.52/3010.80.158.53 – 10.80.158.5410.80.158.55
1510.80.158.56/3010.80.158.57 – 10.80.158.5810.80.158.59
1610.80.158.60/3010.80.158.61 – 10.80.158.6210.80.158.63
1710.80.158.64/3010.80.158.65 – 10.80.158.6610.80.158.67
1810.80.158.68/3010.80.158.69 – 10.80.158.7010.80.158.71
1910.80.158.72/3010.80.158.73 – 10.80.158.7410.80.158.75
2010.80.158.76/3010.80.158.77 – 10.80.158.7810.80.158.79
2110.80.158.80/3010.80.158.81 – 10.80.158.8210.80.158.83
2210.80.158.84/3010.80.158.85 – 10.80.158.8610.80.158.87
2310.80.158.88/3010.80.158.89 – 10.80.158.9010.80.158.91
2410.80.158.92/3010.80.158.93 – 10.80.158.9410.80.158.95
2510.80.158.96/3010.80.158.97 – 10.80.158.9810.80.158.99
2610.80.158.100/3010.80.158.101 – 10.80.158.10210.80.158.103
2710.80.158.104/3010.80.158.105 – 10.80.158.10610.80.158.107
2810.80.158.108/3010.80.158.109 – 10.80.158.11010.80.158.111
2910.80.158.112/3010.80.158.113 – 10.80.158.11410.80.158.115
3010.80.158.116/3010.80.158.117 – 10.80.158.11810.80.158.119
3110.80.158.120/3010.80.158.121 – 10.80.158.12210.80.158.123
3210.80.158.124/3010.80.158.125 – 10.80.158.12610.80.158.127
3310.80.158.128/3010.80.158.129 – 10.80.158.13010.80.158.131
3410.80.158.132/3010.80.158.133 – 10.80.158.13410.80.158.135
3510.80.158.136/3010.80.158.137 – 10.80.158.13810.80.158.139
3610.80.158.140/3010.80.158.141 – 10.80.158.14210.80.158.143
3710.80.158.144/3010.80.158.145 – 10.80.158.14610.80.158.147
3810.80.158.148/3010.80.158.149 – 10.80.158.15010.80.158.151
3910.80.158.152/3010.80.158.153 – 10.80.158.15410.80.158.155
4010.80.158.156/3010.80.158.157 – 10.80.158.15810.80.158.159
4110.80.158.160/3010.80.158.161 – 10.80.158.16210.80.158.163
4210.80.158.164/3010.80.158.165 – 10.80.158.16610.80.158.167
4310.80.158.168/3010.80.158.169 – 10.80.158.17010.80.158.171
4410.80.158.172/3010.80.158.173 – 10.80.158.17410.80.158.175
4510.80.158.176/3010.80.158.177 – 10.80.158.17810.80.158.179
4610.80.158.180/3010.80.158.181 – 10.80.158.18210.80.158.183
4710.80.158.184/3010.80.158.185 – 10.80.158.18610.80.158.187
4810.80.158.188/3010.80.158.189 – 10.80.158.19010.80.158.191
4910.80.158.192/3010.80.158.193 – 10.80.158.19410.80.158.195
5010.80.158.196/3010.80.158.197 – 10.80.158.19810.80.158.199
5110.80.158.200/3010.80.158.201 – 10.80.158.20210.80.158.203
5210.80.158.204/3010.80.158.205 – 10.80.158.20610.80.158.207
5310.80.158.208/3010.80.158.209 – 10.80.158.21010.80.158.211
5410.80.158.212/3010.80.158.213 – 10.80.158.21410.80.158.215
5510.80.158.216/3010.80.158.217 – 10.80.158.21810.80.158.219
5610.80.158.220/3010.80.158.221 – 10.80.158.22210.80.158.223
5710.80.158.224/3010.80.158.225 – 10.80.158.22610.80.158.227
5810.80.158.228/3010.80.158.229 – 10.80.158.23010.80.158.231
5910.80.158.232/3010.80.158.233 – 10.80.158.23410.80.158.235
6010.80.158.236/3010.80.158.237 – 10.80.158.23810.80.158.239
6110.80.158.240/3010.80.158.241 – 10.80.158.24210.80.158.243
6210.80.158.244/3010.80.158.245 – 10.80.158.24610.80.158.247
6310.80.158.248/3010.80.158.249 – 10.80.158.25010.80.158.251
6410.80.158.252/3010.80.158.253 – 10.80.158.25410.80.158.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →