ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.80.149.0/24
network10.80.149.0/24
broadcast10.80.149.255
first host10.80.149.1
last host10.80.149.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.80.149.0/24
address00001010.01010000.10010101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01010000.10010101.00000000
broadcast00001010.01010000.10010101.11111111
green = network part, grey = host part
hex0x0a509500
decimal173053184
reverse dns0.149.80.10.in-addr.arpa
ipv4-mapped::ffff:a50:9500

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.80.149.0/3010.80.149.1 – 10.80.149.210.80.149.3
210.80.149.4/3010.80.149.5 – 10.80.149.610.80.149.7
310.80.149.8/3010.80.149.9 – 10.80.149.1010.80.149.11
410.80.149.12/3010.80.149.13 – 10.80.149.1410.80.149.15
510.80.149.16/3010.80.149.17 – 10.80.149.1810.80.149.19
610.80.149.20/3010.80.149.21 – 10.80.149.2210.80.149.23
710.80.149.24/3010.80.149.25 – 10.80.149.2610.80.149.27
810.80.149.28/3010.80.149.29 – 10.80.149.3010.80.149.31
910.80.149.32/3010.80.149.33 – 10.80.149.3410.80.149.35
1010.80.149.36/3010.80.149.37 – 10.80.149.3810.80.149.39
1110.80.149.40/3010.80.149.41 – 10.80.149.4210.80.149.43
1210.80.149.44/3010.80.149.45 – 10.80.149.4610.80.149.47
1310.80.149.48/3010.80.149.49 – 10.80.149.5010.80.149.51
1410.80.149.52/3010.80.149.53 – 10.80.149.5410.80.149.55
1510.80.149.56/3010.80.149.57 – 10.80.149.5810.80.149.59
1610.80.149.60/3010.80.149.61 – 10.80.149.6210.80.149.63
1710.80.149.64/3010.80.149.65 – 10.80.149.6610.80.149.67
1810.80.149.68/3010.80.149.69 – 10.80.149.7010.80.149.71
1910.80.149.72/3010.80.149.73 – 10.80.149.7410.80.149.75
2010.80.149.76/3010.80.149.77 – 10.80.149.7810.80.149.79
2110.80.149.80/3010.80.149.81 – 10.80.149.8210.80.149.83
2210.80.149.84/3010.80.149.85 – 10.80.149.8610.80.149.87
2310.80.149.88/3010.80.149.89 – 10.80.149.9010.80.149.91
2410.80.149.92/3010.80.149.93 – 10.80.149.9410.80.149.95
2510.80.149.96/3010.80.149.97 – 10.80.149.9810.80.149.99
2610.80.149.100/3010.80.149.101 – 10.80.149.10210.80.149.103
2710.80.149.104/3010.80.149.105 – 10.80.149.10610.80.149.107
2810.80.149.108/3010.80.149.109 – 10.80.149.11010.80.149.111
2910.80.149.112/3010.80.149.113 – 10.80.149.11410.80.149.115
3010.80.149.116/3010.80.149.117 – 10.80.149.11810.80.149.119
3110.80.149.120/3010.80.149.121 – 10.80.149.12210.80.149.123
3210.80.149.124/3010.80.149.125 – 10.80.149.12610.80.149.127
3310.80.149.128/3010.80.149.129 – 10.80.149.13010.80.149.131
3410.80.149.132/3010.80.149.133 – 10.80.149.13410.80.149.135
3510.80.149.136/3010.80.149.137 – 10.80.149.13810.80.149.139
3610.80.149.140/3010.80.149.141 – 10.80.149.14210.80.149.143
3710.80.149.144/3010.80.149.145 – 10.80.149.14610.80.149.147
3810.80.149.148/3010.80.149.149 – 10.80.149.15010.80.149.151
3910.80.149.152/3010.80.149.153 – 10.80.149.15410.80.149.155
4010.80.149.156/3010.80.149.157 – 10.80.149.15810.80.149.159
4110.80.149.160/3010.80.149.161 – 10.80.149.16210.80.149.163
4210.80.149.164/3010.80.149.165 – 10.80.149.16610.80.149.167
4310.80.149.168/3010.80.149.169 – 10.80.149.17010.80.149.171
4410.80.149.172/3010.80.149.173 – 10.80.149.17410.80.149.175
4510.80.149.176/3010.80.149.177 – 10.80.149.17810.80.149.179
4610.80.149.180/3010.80.149.181 – 10.80.149.18210.80.149.183
4710.80.149.184/3010.80.149.185 – 10.80.149.18610.80.149.187
4810.80.149.188/3010.80.149.189 – 10.80.149.19010.80.149.191
4910.80.149.192/3010.80.149.193 – 10.80.149.19410.80.149.195
5010.80.149.196/3010.80.149.197 – 10.80.149.19810.80.149.199
5110.80.149.200/3010.80.149.201 – 10.80.149.20210.80.149.203
5210.80.149.204/3010.80.149.205 – 10.80.149.20610.80.149.207
5310.80.149.208/3010.80.149.209 – 10.80.149.21010.80.149.211
5410.80.149.212/3010.80.149.213 – 10.80.149.21410.80.149.215
5510.80.149.216/3010.80.149.217 – 10.80.149.21810.80.149.219
5610.80.149.220/3010.80.149.221 – 10.80.149.22210.80.149.223
5710.80.149.224/3010.80.149.225 – 10.80.149.22610.80.149.227
5810.80.149.228/3010.80.149.229 – 10.80.149.23010.80.149.231
5910.80.149.232/3010.80.149.233 – 10.80.149.23410.80.149.235
6010.80.149.236/3010.80.149.237 – 10.80.149.23810.80.149.239
6110.80.149.240/3010.80.149.241 – 10.80.149.24210.80.149.243
6210.80.149.244/3010.80.149.245 – 10.80.149.24610.80.149.247
6310.80.149.248/3010.80.149.249 – 10.80.149.25010.80.149.251
6410.80.149.252/3010.80.149.253 – 10.80.149.25410.80.149.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →