IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.8.71.0/24

network10.8.71.0/24

broadcast10.8.71.255

first host10.8.71.1

last host10.8.71.254

subnet mask255.255.255.0

wildcard0.0.0.255

addresses256

usable hosts254

classA

ipcalc 10.8.71.0/24

address00001010.00001000.01000111.00000000

subnet mask11111111.11111111.11111111.00000000

network00001010.00001000.01000111.00000000

broadcast00001010.00001000.01000111.11111111

green = network part, grey = host part

hex0x0a084700

decimal168314624

reverse dns0.71.8.10.in-addr.arpa

ipv4-mapped::ffff:a08:4700

/24 split into /30 · 64 subnets

close ×

#	network	host range	broadcast
1	10.8.71.0/30	10.8.71.1 – 10.8.71.2	10.8.71.3
2	10.8.71.4/30	10.8.71.5 – 10.8.71.6	10.8.71.7
3	10.8.71.8/30	10.8.71.9 – 10.8.71.10	10.8.71.11
4	10.8.71.12/30	10.8.71.13 – 10.8.71.14	10.8.71.15
5	10.8.71.16/30	10.8.71.17 – 10.8.71.18	10.8.71.19
6	10.8.71.20/30	10.8.71.21 – 10.8.71.22	10.8.71.23
7	10.8.71.24/30	10.8.71.25 – 10.8.71.26	10.8.71.27
8	10.8.71.28/30	10.8.71.29 – 10.8.71.30	10.8.71.31
9	10.8.71.32/30	10.8.71.33 – 10.8.71.34	10.8.71.35
10	10.8.71.36/30	10.8.71.37 – 10.8.71.38	10.8.71.39
11	10.8.71.40/30	10.8.71.41 – 10.8.71.42	10.8.71.43
12	10.8.71.44/30	10.8.71.45 – 10.8.71.46	10.8.71.47
13	10.8.71.48/30	10.8.71.49 – 10.8.71.50	10.8.71.51
14	10.8.71.52/30	10.8.71.53 – 10.8.71.54	10.8.71.55
15	10.8.71.56/30	10.8.71.57 – 10.8.71.58	10.8.71.59
16	10.8.71.60/30	10.8.71.61 – 10.8.71.62	10.8.71.63
17	10.8.71.64/30	10.8.71.65 – 10.8.71.66	10.8.71.67
18	10.8.71.68/30	10.8.71.69 – 10.8.71.70	10.8.71.71
19	10.8.71.72/30	10.8.71.73 – 10.8.71.74	10.8.71.75
20	10.8.71.76/30	10.8.71.77 – 10.8.71.78	10.8.71.79
21	10.8.71.80/30	10.8.71.81 – 10.8.71.82	10.8.71.83
22	10.8.71.84/30	10.8.71.85 – 10.8.71.86	10.8.71.87
23	10.8.71.88/30	10.8.71.89 – 10.8.71.90	10.8.71.91
24	10.8.71.92/30	10.8.71.93 – 10.8.71.94	10.8.71.95
25	10.8.71.96/30	10.8.71.97 – 10.8.71.98	10.8.71.99
26	10.8.71.100/30	10.8.71.101 – 10.8.71.102	10.8.71.103
27	10.8.71.104/30	10.8.71.105 – 10.8.71.106	10.8.71.107
28	10.8.71.108/30	10.8.71.109 – 10.8.71.110	10.8.71.111
29	10.8.71.112/30	10.8.71.113 – 10.8.71.114	10.8.71.115
30	10.8.71.116/30	10.8.71.117 – 10.8.71.118	10.8.71.119
31	10.8.71.120/30	10.8.71.121 – 10.8.71.122	10.8.71.123
32	10.8.71.124/30	10.8.71.125 – 10.8.71.126	10.8.71.127
33	10.8.71.128/30	10.8.71.129 – 10.8.71.130	10.8.71.131
34	10.8.71.132/30	10.8.71.133 – 10.8.71.134	10.8.71.135
35	10.8.71.136/30	10.8.71.137 – 10.8.71.138	10.8.71.139
36	10.8.71.140/30	10.8.71.141 – 10.8.71.142	10.8.71.143
37	10.8.71.144/30	10.8.71.145 – 10.8.71.146	10.8.71.147
38	10.8.71.148/30	10.8.71.149 – 10.8.71.150	10.8.71.151
39	10.8.71.152/30	10.8.71.153 – 10.8.71.154	10.8.71.155
40	10.8.71.156/30	10.8.71.157 – 10.8.71.158	10.8.71.159
41	10.8.71.160/30	10.8.71.161 – 10.8.71.162	10.8.71.163
42	10.8.71.164/30	10.8.71.165 – 10.8.71.166	10.8.71.167
43	10.8.71.168/30	10.8.71.169 – 10.8.71.170	10.8.71.171
44	10.8.71.172/30	10.8.71.173 – 10.8.71.174	10.8.71.175
45	10.8.71.176/30	10.8.71.177 – 10.8.71.178	10.8.71.179
46	10.8.71.180/30	10.8.71.181 – 10.8.71.182	10.8.71.183
47	10.8.71.184/30	10.8.71.185 – 10.8.71.186	10.8.71.187
48	10.8.71.188/30	10.8.71.189 – 10.8.71.190	10.8.71.191
49	10.8.71.192/30	10.8.71.193 – 10.8.71.194	10.8.71.195
50	10.8.71.196/30	10.8.71.197 – 10.8.71.198	10.8.71.199
51	10.8.71.200/30	10.8.71.201 – 10.8.71.202	10.8.71.203
52	10.8.71.204/30	10.8.71.205 – 10.8.71.206	10.8.71.207
53	10.8.71.208/30	10.8.71.209 – 10.8.71.210	10.8.71.211
54	10.8.71.212/30	10.8.71.213 – 10.8.71.214	10.8.71.215
55	10.8.71.216/30	10.8.71.217 – 10.8.71.218	10.8.71.219
56	10.8.71.220/30	10.8.71.221 – 10.8.71.222	10.8.71.223
57	10.8.71.224/30	10.8.71.225 – 10.8.71.226	10.8.71.227
58	10.8.71.228/30	10.8.71.229 – 10.8.71.230	10.8.71.231
59	10.8.71.232/30	10.8.71.233 – 10.8.71.234	10.8.71.235
60	10.8.71.236/30	10.8.71.237 – 10.8.71.238	10.8.71.239
61	10.8.71.240/30	10.8.71.241 – 10.8.71.242	10.8.71.243
62	10.8.71.244/30	10.8.71.245 – 10.8.71.246	10.8.71.247
63	10.8.71.248/30	10.8.71.249 – 10.8.71.250	10.8.71.251
64	10.8.71.252/30	10.8.71.253 – 10.8.71.254	10.8.71.255

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /24
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	1
/25	255.255.255.128	128	126	2 split →
/26	255.255.255.192	64	62	4 split →
/27	255.255.255.224	32	30	8 split →
/28	255.255.255.240	16	14	16 split →
/29	255.255.255.248	8	6	32 split →
/30	255.255.255.252	4	2	64 split →
/31	255.255.255.254	2	2	128 split →
/32	255.255.255.255	1	1	256 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →