ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.8.46.0/23
network10.8.46.0/23
broadcast10.8.47.255
first host10.8.46.1
last host10.8.47.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.8.46.0/23
address00001010.00001000.00101110.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00001000.00101110.00000000
broadcast00001010.00001000.00101111.11111111
green = network part, grey = host part
hex0x0a082e00
decimal168308224
reverse dns0.46.8.10.in-addr.arpa
ipv4-mapped::ffff:a08:2e00

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.8.46.0/2810.8.46.1 – 10.8.46.1410.8.46.15
210.8.46.16/2810.8.46.17 – 10.8.46.3010.8.46.31
310.8.46.32/2810.8.46.33 – 10.8.46.4610.8.46.47
410.8.46.48/2810.8.46.49 – 10.8.46.6210.8.46.63
510.8.46.64/2810.8.46.65 – 10.8.46.7810.8.46.79
610.8.46.80/2810.8.46.81 – 10.8.46.9410.8.46.95
710.8.46.96/2810.8.46.97 – 10.8.46.11010.8.46.111
810.8.46.112/2810.8.46.113 – 10.8.46.12610.8.46.127
910.8.46.128/2810.8.46.129 – 10.8.46.14210.8.46.143
1010.8.46.144/2810.8.46.145 – 10.8.46.15810.8.46.159
1110.8.46.160/2810.8.46.161 – 10.8.46.17410.8.46.175
1210.8.46.176/2810.8.46.177 – 10.8.46.19010.8.46.191
1310.8.46.192/2810.8.46.193 – 10.8.46.20610.8.46.207
1410.8.46.208/2810.8.46.209 – 10.8.46.22210.8.46.223
1510.8.46.224/2810.8.46.225 – 10.8.46.23810.8.46.239
1610.8.46.240/2810.8.46.241 – 10.8.46.25410.8.46.255
1710.8.47.0/2810.8.47.1 – 10.8.47.1410.8.47.15
1810.8.47.16/2810.8.47.17 – 10.8.47.3010.8.47.31
1910.8.47.32/2810.8.47.33 – 10.8.47.4610.8.47.47
2010.8.47.48/2810.8.47.49 – 10.8.47.6210.8.47.63
2110.8.47.64/2810.8.47.65 – 10.8.47.7810.8.47.79
2210.8.47.80/2810.8.47.81 – 10.8.47.9410.8.47.95
2310.8.47.96/2810.8.47.97 – 10.8.47.11010.8.47.111
2410.8.47.112/2810.8.47.113 – 10.8.47.12610.8.47.127
2510.8.47.128/2810.8.47.129 – 10.8.47.14210.8.47.143
2610.8.47.144/2810.8.47.145 – 10.8.47.15810.8.47.159
2710.8.47.160/2810.8.47.161 – 10.8.47.17410.8.47.175
2810.8.47.176/2810.8.47.177 – 10.8.47.19010.8.47.191
2910.8.47.192/2810.8.47.193 – 10.8.47.20610.8.47.207
3010.8.47.208/2810.8.47.209 – 10.8.47.22210.8.47.223
3110.8.47.224/2810.8.47.225 – 10.8.47.23810.8.47.239
3210.8.47.240/2810.8.47.241 – 10.8.47.25410.8.47.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →