ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.89.192/27
network10.78.89.192/27
broadcast10.78.89.223
first host10.78.89.193
last host10.78.89.222
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.78.89.192/27
address00001010.01001110.01011001.11000000
subnet mask11111111.11111111.11111111.11100000
network00001010.01001110.01011001.11000000
broadcast00001010.01001110.01011001.11011111
green = network part, grey = host part
hex0x0a4e59c0
decimal172906944
reverse dns192.89.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:59c0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.78.89.192/3210.78.89.192 – 10.78.89.19210.78.89.192
210.78.89.193/3210.78.89.193 – 10.78.89.19310.78.89.193
310.78.89.194/3210.78.89.194 – 10.78.89.19410.78.89.194
410.78.89.195/3210.78.89.195 – 10.78.89.19510.78.89.195
510.78.89.196/3210.78.89.196 – 10.78.89.19610.78.89.196
610.78.89.197/3210.78.89.197 – 10.78.89.19710.78.89.197
710.78.89.198/3210.78.89.198 – 10.78.89.19810.78.89.198
810.78.89.199/3210.78.89.199 – 10.78.89.19910.78.89.199
910.78.89.200/3210.78.89.200 – 10.78.89.20010.78.89.200
1010.78.89.201/3210.78.89.201 – 10.78.89.20110.78.89.201
1110.78.89.202/3210.78.89.202 – 10.78.89.20210.78.89.202
1210.78.89.203/3210.78.89.203 – 10.78.89.20310.78.89.203
1310.78.89.204/3210.78.89.204 – 10.78.89.20410.78.89.204
1410.78.89.205/3210.78.89.205 – 10.78.89.20510.78.89.205
1510.78.89.206/3210.78.89.206 – 10.78.89.20610.78.89.206
1610.78.89.207/3210.78.89.207 – 10.78.89.20710.78.89.207
1710.78.89.208/3210.78.89.208 – 10.78.89.20810.78.89.208
1810.78.89.209/3210.78.89.209 – 10.78.89.20910.78.89.209
1910.78.89.210/3210.78.89.210 – 10.78.89.21010.78.89.210
2010.78.89.211/3210.78.89.211 – 10.78.89.21110.78.89.211
2110.78.89.212/3210.78.89.212 – 10.78.89.21210.78.89.212
2210.78.89.213/3210.78.89.213 – 10.78.89.21310.78.89.213
2310.78.89.214/3210.78.89.214 – 10.78.89.21410.78.89.214
2410.78.89.215/3210.78.89.215 – 10.78.89.21510.78.89.215
2510.78.89.216/3210.78.89.216 – 10.78.89.21610.78.89.216
2610.78.89.217/3210.78.89.217 – 10.78.89.21710.78.89.217
2710.78.89.218/3210.78.89.218 – 10.78.89.21810.78.89.218
2810.78.89.219/3210.78.89.219 – 10.78.89.21910.78.89.219
2910.78.89.220/3210.78.89.220 – 10.78.89.22010.78.89.220
3010.78.89.221/3210.78.89.221 – 10.78.89.22110.78.89.221
3110.78.89.222/3210.78.89.222 – 10.78.89.22210.78.89.222
3210.78.89.223/3210.78.89.223 – 10.78.89.22310.78.89.223
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →