ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.56.192/26
network10.78.56.192/26
broadcast10.78.56.255
first host10.78.56.193
last host10.78.56.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.56.192/26
address00001010.01001110.00111000.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.00111000.11000000
broadcast00001010.01001110.00111000.11111111
green = network part, grey = host part
hex0x0a4e38c0
decimal172898496
reverse dns192.56.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:38c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.56.192/3210.78.56.192 – 10.78.56.19210.78.56.192
210.78.56.193/3210.78.56.193 – 10.78.56.19310.78.56.193
310.78.56.194/3210.78.56.194 – 10.78.56.19410.78.56.194
410.78.56.195/3210.78.56.195 – 10.78.56.19510.78.56.195
510.78.56.196/3210.78.56.196 – 10.78.56.19610.78.56.196
610.78.56.197/3210.78.56.197 – 10.78.56.19710.78.56.197
710.78.56.198/3210.78.56.198 – 10.78.56.19810.78.56.198
810.78.56.199/3210.78.56.199 – 10.78.56.19910.78.56.199
910.78.56.200/3210.78.56.200 – 10.78.56.20010.78.56.200
1010.78.56.201/3210.78.56.201 – 10.78.56.20110.78.56.201
1110.78.56.202/3210.78.56.202 – 10.78.56.20210.78.56.202
1210.78.56.203/3210.78.56.203 – 10.78.56.20310.78.56.203
1310.78.56.204/3210.78.56.204 – 10.78.56.20410.78.56.204
1410.78.56.205/3210.78.56.205 – 10.78.56.20510.78.56.205
1510.78.56.206/3210.78.56.206 – 10.78.56.20610.78.56.206
1610.78.56.207/3210.78.56.207 – 10.78.56.20710.78.56.207
1710.78.56.208/3210.78.56.208 – 10.78.56.20810.78.56.208
1810.78.56.209/3210.78.56.209 – 10.78.56.20910.78.56.209
1910.78.56.210/3210.78.56.210 – 10.78.56.21010.78.56.210
2010.78.56.211/3210.78.56.211 – 10.78.56.21110.78.56.211
2110.78.56.212/3210.78.56.212 – 10.78.56.21210.78.56.212
2210.78.56.213/3210.78.56.213 – 10.78.56.21310.78.56.213
2310.78.56.214/3210.78.56.214 – 10.78.56.21410.78.56.214
2410.78.56.215/3210.78.56.215 – 10.78.56.21510.78.56.215
2510.78.56.216/3210.78.56.216 – 10.78.56.21610.78.56.216
2610.78.56.217/3210.78.56.217 – 10.78.56.21710.78.56.217
2710.78.56.218/3210.78.56.218 – 10.78.56.21810.78.56.218
2810.78.56.219/3210.78.56.219 – 10.78.56.21910.78.56.219
2910.78.56.220/3210.78.56.220 – 10.78.56.22010.78.56.220
3010.78.56.221/3210.78.56.221 – 10.78.56.22110.78.56.221
3110.78.56.222/3210.78.56.222 – 10.78.56.22210.78.56.222
3210.78.56.223/3210.78.56.223 – 10.78.56.22310.78.56.223
3310.78.56.224/3210.78.56.224 – 10.78.56.22410.78.56.224
3410.78.56.225/3210.78.56.225 – 10.78.56.22510.78.56.225
3510.78.56.226/3210.78.56.226 – 10.78.56.22610.78.56.226
3610.78.56.227/3210.78.56.227 – 10.78.56.22710.78.56.227
3710.78.56.228/3210.78.56.228 – 10.78.56.22810.78.56.228
3810.78.56.229/3210.78.56.229 – 10.78.56.22910.78.56.229
3910.78.56.230/3210.78.56.230 – 10.78.56.23010.78.56.230
4010.78.56.231/3210.78.56.231 – 10.78.56.23110.78.56.231
4110.78.56.232/3210.78.56.232 – 10.78.56.23210.78.56.232
4210.78.56.233/3210.78.56.233 – 10.78.56.23310.78.56.233
4310.78.56.234/3210.78.56.234 – 10.78.56.23410.78.56.234
4410.78.56.235/3210.78.56.235 – 10.78.56.23510.78.56.235
4510.78.56.236/3210.78.56.236 – 10.78.56.23610.78.56.236
4610.78.56.237/3210.78.56.237 – 10.78.56.23710.78.56.237
4710.78.56.238/3210.78.56.238 – 10.78.56.23810.78.56.238
4810.78.56.239/3210.78.56.239 – 10.78.56.23910.78.56.239
4910.78.56.240/3210.78.56.240 – 10.78.56.24010.78.56.240
5010.78.56.241/3210.78.56.241 – 10.78.56.24110.78.56.241
5110.78.56.242/3210.78.56.242 – 10.78.56.24210.78.56.242
5210.78.56.243/3210.78.56.243 – 10.78.56.24310.78.56.243
5310.78.56.244/3210.78.56.244 – 10.78.56.24410.78.56.244
5410.78.56.245/3210.78.56.245 – 10.78.56.24510.78.56.245
5510.78.56.246/3210.78.56.246 – 10.78.56.24610.78.56.246
5610.78.56.247/3210.78.56.247 – 10.78.56.24710.78.56.247
5710.78.56.248/3210.78.56.248 – 10.78.56.24810.78.56.248
5810.78.56.249/3210.78.56.249 – 10.78.56.24910.78.56.249
5910.78.56.250/3210.78.56.250 – 10.78.56.25010.78.56.250
6010.78.56.251/3210.78.56.251 – 10.78.56.25110.78.56.251
6110.78.56.252/3210.78.56.252 – 10.78.56.25210.78.56.252
6210.78.56.253/3210.78.56.253 – 10.78.56.25310.78.56.253
6310.78.56.254/3210.78.56.254 – 10.78.56.25410.78.56.254
6410.78.56.255/3210.78.56.255 – 10.78.56.25510.78.56.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →