ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.32.64/26
network10.78.32.64/26
broadcast10.78.32.127
first host10.78.32.65
last host10.78.32.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.32.64/26
address00001010.01001110.00100000.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.00100000.01000000
broadcast00001010.01001110.00100000.01111111
green = network part, grey = host part
hex0x0a4e2040
decimal172892224
reverse dns64.32.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:2040

/26 split into /30 · 16 subnets

close ×
#networkhost rangebroadcast
110.78.32.64/3010.78.32.65 – 10.78.32.6610.78.32.67
210.78.32.68/3010.78.32.69 – 10.78.32.7010.78.32.71
310.78.32.72/3010.78.32.73 – 10.78.32.7410.78.32.75
410.78.32.76/3010.78.32.77 – 10.78.32.7810.78.32.79
510.78.32.80/3010.78.32.81 – 10.78.32.8210.78.32.83
610.78.32.84/3010.78.32.85 – 10.78.32.8610.78.32.87
710.78.32.88/3010.78.32.89 – 10.78.32.9010.78.32.91
810.78.32.92/3010.78.32.93 – 10.78.32.9410.78.32.95
910.78.32.96/3010.78.32.97 – 10.78.32.9810.78.32.99
1010.78.32.100/3010.78.32.101 – 10.78.32.10210.78.32.103
1110.78.32.104/3010.78.32.105 – 10.78.32.10610.78.32.107
1210.78.32.108/3010.78.32.109 – 10.78.32.11010.78.32.111
1310.78.32.112/3010.78.32.113 – 10.78.32.11410.78.32.115
1410.78.32.116/3010.78.32.117 – 10.78.32.11810.78.32.119
1510.78.32.120/3010.78.32.121 – 10.78.32.12210.78.32.123
1610.78.32.124/3010.78.32.125 – 10.78.32.12610.78.32.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →