ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.32.0/20
network10.78.32.0/20
broadcast10.78.47.255
first host10.78.32.1
last host10.78.47.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.78.32.0/20
address00001010.01001110.00100000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.01001110.00100000.00000000
broadcast00001010.01001110.00101111.11111111
green = network part, grey = host part
hex0x0a4e2000
decimal172892160
reverse dns0.32.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:2000

/20 split into /26 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.32.0/2610.78.32.1 – 10.78.32.6210.78.32.63
210.78.32.64/2610.78.32.65 – 10.78.32.12610.78.32.127
310.78.32.128/2610.78.32.129 – 10.78.32.19010.78.32.191
410.78.32.192/2610.78.32.193 – 10.78.32.25410.78.32.255
510.78.33.0/2610.78.33.1 – 10.78.33.6210.78.33.63
610.78.33.64/2610.78.33.65 – 10.78.33.12610.78.33.127
710.78.33.128/2610.78.33.129 – 10.78.33.19010.78.33.191
810.78.33.192/2610.78.33.193 – 10.78.33.25410.78.33.255
910.78.34.0/2610.78.34.1 – 10.78.34.6210.78.34.63
1010.78.34.64/2610.78.34.65 – 10.78.34.12610.78.34.127
1110.78.34.128/2610.78.34.129 – 10.78.34.19010.78.34.191
1210.78.34.192/2610.78.34.193 – 10.78.34.25410.78.34.255
1310.78.35.0/2610.78.35.1 – 10.78.35.6210.78.35.63
1410.78.35.64/2610.78.35.65 – 10.78.35.12610.78.35.127
1510.78.35.128/2610.78.35.129 – 10.78.35.19010.78.35.191
1610.78.35.192/2610.78.35.193 – 10.78.35.25410.78.35.255
1710.78.36.0/2610.78.36.1 – 10.78.36.6210.78.36.63
1810.78.36.64/2610.78.36.65 – 10.78.36.12610.78.36.127
1910.78.36.128/2610.78.36.129 – 10.78.36.19010.78.36.191
2010.78.36.192/2610.78.36.193 – 10.78.36.25410.78.36.255
2110.78.37.0/2610.78.37.1 – 10.78.37.6210.78.37.63
2210.78.37.64/2610.78.37.65 – 10.78.37.12610.78.37.127
2310.78.37.128/2610.78.37.129 – 10.78.37.19010.78.37.191
2410.78.37.192/2610.78.37.193 – 10.78.37.25410.78.37.255
2510.78.38.0/2610.78.38.1 – 10.78.38.6210.78.38.63
2610.78.38.64/2610.78.38.65 – 10.78.38.12610.78.38.127
2710.78.38.128/2610.78.38.129 – 10.78.38.19010.78.38.191
2810.78.38.192/2610.78.38.193 – 10.78.38.25410.78.38.255
2910.78.39.0/2610.78.39.1 – 10.78.39.6210.78.39.63
3010.78.39.64/2610.78.39.65 – 10.78.39.12610.78.39.127
3110.78.39.128/2610.78.39.129 – 10.78.39.19010.78.39.191
3210.78.39.192/2610.78.39.193 – 10.78.39.25410.78.39.255
3310.78.40.0/2610.78.40.1 – 10.78.40.6210.78.40.63
3410.78.40.64/2610.78.40.65 – 10.78.40.12610.78.40.127
3510.78.40.128/2610.78.40.129 – 10.78.40.19010.78.40.191
3610.78.40.192/2610.78.40.193 – 10.78.40.25410.78.40.255
3710.78.41.0/2610.78.41.1 – 10.78.41.6210.78.41.63
3810.78.41.64/2610.78.41.65 – 10.78.41.12610.78.41.127
3910.78.41.128/2610.78.41.129 – 10.78.41.19010.78.41.191
4010.78.41.192/2610.78.41.193 – 10.78.41.25410.78.41.255
4110.78.42.0/2610.78.42.1 – 10.78.42.6210.78.42.63
4210.78.42.64/2610.78.42.65 – 10.78.42.12610.78.42.127
4310.78.42.128/2610.78.42.129 – 10.78.42.19010.78.42.191
4410.78.42.192/2610.78.42.193 – 10.78.42.25410.78.42.255
4510.78.43.0/2610.78.43.1 – 10.78.43.6210.78.43.63
4610.78.43.64/2610.78.43.65 – 10.78.43.12610.78.43.127
4710.78.43.128/2610.78.43.129 – 10.78.43.19010.78.43.191
4810.78.43.192/2610.78.43.193 – 10.78.43.25410.78.43.255
4910.78.44.0/2610.78.44.1 – 10.78.44.6210.78.44.63
5010.78.44.64/2610.78.44.65 – 10.78.44.12610.78.44.127
5110.78.44.128/2610.78.44.129 – 10.78.44.19010.78.44.191
5210.78.44.192/2610.78.44.193 – 10.78.44.25410.78.44.255
5310.78.45.0/2610.78.45.1 – 10.78.45.6210.78.45.63
5410.78.45.64/2610.78.45.65 – 10.78.45.12610.78.45.127
5510.78.45.128/2610.78.45.129 – 10.78.45.19010.78.45.191
5610.78.45.192/2610.78.45.193 – 10.78.45.25410.78.45.255
5710.78.46.0/2610.78.46.1 – 10.78.46.6210.78.46.63
5810.78.46.64/2610.78.46.65 – 10.78.46.12610.78.46.127
5910.78.46.128/2610.78.46.129 – 10.78.46.19010.78.46.191
6010.78.46.192/2610.78.46.193 – 10.78.46.25410.78.46.255
6110.78.47.0/2610.78.47.1 – 10.78.47.6210.78.47.63
6210.78.47.64/2610.78.47.65 – 10.78.47.12610.78.47.127
6310.78.47.128/2610.78.47.129 – 10.78.47.19010.78.47.191
6410.78.47.192/2610.78.47.193 – 10.78.47.25410.78.47.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →