ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.253.0/24
network10.78.253.0/24
broadcast10.78.253.255
first host10.78.253.1
last host10.78.253.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.78.253.0/24
address00001010.01001110.11111101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001110.11111101.00000000
broadcast00001010.01001110.11111101.11111111
green = network part, grey = host part
hex0x0a4efd00
decimal172948736
reverse dns0.253.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:fd00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.253.0/3010.78.253.1 – 10.78.253.210.78.253.3
210.78.253.4/3010.78.253.5 – 10.78.253.610.78.253.7
310.78.253.8/3010.78.253.9 – 10.78.253.1010.78.253.11
410.78.253.12/3010.78.253.13 – 10.78.253.1410.78.253.15
510.78.253.16/3010.78.253.17 – 10.78.253.1810.78.253.19
610.78.253.20/3010.78.253.21 – 10.78.253.2210.78.253.23
710.78.253.24/3010.78.253.25 – 10.78.253.2610.78.253.27
810.78.253.28/3010.78.253.29 – 10.78.253.3010.78.253.31
910.78.253.32/3010.78.253.33 – 10.78.253.3410.78.253.35
1010.78.253.36/3010.78.253.37 – 10.78.253.3810.78.253.39
1110.78.253.40/3010.78.253.41 – 10.78.253.4210.78.253.43
1210.78.253.44/3010.78.253.45 – 10.78.253.4610.78.253.47
1310.78.253.48/3010.78.253.49 – 10.78.253.5010.78.253.51
1410.78.253.52/3010.78.253.53 – 10.78.253.5410.78.253.55
1510.78.253.56/3010.78.253.57 – 10.78.253.5810.78.253.59
1610.78.253.60/3010.78.253.61 – 10.78.253.6210.78.253.63
1710.78.253.64/3010.78.253.65 – 10.78.253.6610.78.253.67
1810.78.253.68/3010.78.253.69 – 10.78.253.7010.78.253.71
1910.78.253.72/3010.78.253.73 – 10.78.253.7410.78.253.75
2010.78.253.76/3010.78.253.77 – 10.78.253.7810.78.253.79
2110.78.253.80/3010.78.253.81 – 10.78.253.8210.78.253.83
2210.78.253.84/3010.78.253.85 – 10.78.253.8610.78.253.87
2310.78.253.88/3010.78.253.89 – 10.78.253.9010.78.253.91
2410.78.253.92/3010.78.253.93 – 10.78.253.9410.78.253.95
2510.78.253.96/3010.78.253.97 – 10.78.253.9810.78.253.99
2610.78.253.100/3010.78.253.101 – 10.78.253.10210.78.253.103
2710.78.253.104/3010.78.253.105 – 10.78.253.10610.78.253.107
2810.78.253.108/3010.78.253.109 – 10.78.253.11010.78.253.111
2910.78.253.112/3010.78.253.113 – 10.78.253.11410.78.253.115
3010.78.253.116/3010.78.253.117 – 10.78.253.11810.78.253.119
3110.78.253.120/3010.78.253.121 – 10.78.253.12210.78.253.123
3210.78.253.124/3010.78.253.125 – 10.78.253.12610.78.253.127
3310.78.253.128/3010.78.253.129 – 10.78.253.13010.78.253.131
3410.78.253.132/3010.78.253.133 – 10.78.253.13410.78.253.135
3510.78.253.136/3010.78.253.137 – 10.78.253.13810.78.253.139
3610.78.253.140/3010.78.253.141 – 10.78.253.14210.78.253.143
3710.78.253.144/3010.78.253.145 – 10.78.253.14610.78.253.147
3810.78.253.148/3010.78.253.149 – 10.78.253.15010.78.253.151
3910.78.253.152/3010.78.253.153 – 10.78.253.15410.78.253.155
4010.78.253.156/3010.78.253.157 – 10.78.253.15810.78.253.159
4110.78.253.160/3010.78.253.161 – 10.78.253.16210.78.253.163
4210.78.253.164/3010.78.253.165 – 10.78.253.16610.78.253.167
4310.78.253.168/3010.78.253.169 – 10.78.253.17010.78.253.171
4410.78.253.172/3010.78.253.173 – 10.78.253.17410.78.253.175
4510.78.253.176/3010.78.253.177 – 10.78.253.17810.78.253.179
4610.78.253.180/3010.78.253.181 – 10.78.253.18210.78.253.183
4710.78.253.184/3010.78.253.185 – 10.78.253.18610.78.253.187
4810.78.253.188/3010.78.253.189 – 10.78.253.19010.78.253.191
4910.78.253.192/3010.78.253.193 – 10.78.253.19410.78.253.195
5010.78.253.196/3010.78.253.197 – 10.78.253.19810.78.253.199
5110.78.253.200/3010.78.253.201 – 10.78.253.20210.78.253.203
5210.78.253.204/3010.78.253.205 – 10.78.253.20610.78.253.207
5310.78.253.208/3010.78.253.209 – 10.78.253.21010.78.253.211
5410.78.253.212/3010.78.253.213 – 10.78.253.21410.78.253.215
5510.78.253.216/3010.78.253.217 – 10.78.253.21810.78.253.219
5610.78.253.220/3010.78.253.221 – 10.78.253.22210.78.253.223
5710.78.253.224/3010.78.253.225 – 10.78.253.22610.78.253.227
5810.78.253.228/3010.78.253.229 – 10.78.253.23010.78.253.231
5910.78.253.232/3010.78.253.233 – 10.78.253.23410.78.253.235
6010.78.253.236/3010.78.253.237 – 10.78.253.23810.78.253.239
6110.78.253.240/3010.78.253.241 – 10.78.253.24210.78.253.243
6210.78.253.244/3010.78.253.245 – 10.78.253.24610.78.253.247
6310.78.253.248/3010.78.253.249 – 10.78.253.25010.78.253.251
6410.78.253.252/3010.78.253.253 – 10.78.253.25410.78.253.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →