ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.25.192/26
network10.78.25.192/26
broadcast10.78.25.255
first host10.78.25.193
last host10.78.25.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.25.192/26
address00001010.01001110.00011001.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.00011001.11000000
broadcast00001010.01001110.00011001.11111111
green = network part, grey = host part
hex0x0a4e19c0
decimal172890560
reverse dns192.25.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:19c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.25.192/3210.78.25.192 – 10.78.25.19210.78.25.192
210.78.25.193/3210.78.25.193 – 10.78.25.19310.78.25.193
310.78.25.194/3210.78.25.194 – 10.78.25.19410.78.25.194
410.78.25.195/3210.78.25.195 – 10.78.25.19510.78.25.195
510.78.25.196/3210.78.25.196 – 10.78.25.19610.78.25.196
610.78.25.197/3210.78.25.197 – 10.78.25.19710.78.25.197
710.78.25.198/3210.78.25.198 – 10.78.25.19810.78.25.198
810.78.25.199/3210.78.25.199 – 10.78.25.19910.78.25.199
910.78.25.200/3210.78.25.200 – 10.78.25.20010.78.25.200
1010.78.25.201/3210.78.25.201 – 10.78.25.20110.78.25.201
1110.78.25.202/3210.78.25.202 – 10.78.25.20210.78.25.202
1210.78.25.203/3210.78.25.203 – 10.78.25.20310.78.25.203
1310.78.25.204/3210.78.25.204 – 10.78.25.20410.78.25.204
1410.78.25.205/3210.78.25.205 – 10.78.25.20510.78.25.205
1510.78.25.206/3210.78.25.206 – 10.78.25.20610.78.25.206
1610.78.25.207/3210.78.25.207 – 10.78.25.20710.78.25.207
1710.78.25.208/3210.78.25.208 – 10.78.25.20810.78.25.208
1810.78.25.209/3210.78.25.209 – 10.78.25.20910.78.25.209
1910.78.25.210/3210.78.25.210 – 10.78.25.21010.78.25.210
2010.78.25.211/3210.78.25.211 – 10.78.25.21110.78.25.211
2110.78.25.212/3210.78.25.212 – 10.78.25.21210.78.25.212
2210.78.25.213/3210.78.25.213 – 10.78.25.21310.78.25.213
2310.78.25.214/3210.78.25.214 – 10.78.25.21410.78.25.214
2410.78.25.215/3210.78.25.215 – 10.78.25.21510.78.25.215
2510.78.25.216/3210.78.25.216 – 10.78.25.21610.78.25.216
2610.78.25.217/3210.78.25.217 – 10.78.25.21710.78.25.217
2710.78.25.218/3210.78.25.218 – 10.78.25.21810.78.25.218
2810.78.25.219/3210.78.25.219 – 10.78.25.21910.78.25.219
2910.78.25.220/3210.78.25.220 – 10.78.25.22010.78.25.220
3010.78.25.221/3210.78.25.221 – 10.78.25.22110.78.25.221
3110.78.25.222/3210.78.25.222 – 10.78.25.22210.78.25.222
3210.78.25.223/3210.78.25.223 – 10.78.25.22310.78.25.223
3310.78.25.224/3210.78.25.224 – 10.78.25.22410.78.25.224
3410.78.25.225/3210.78.25.225 – 10.78.25.22510.78.25.225
3510.78.25.226/3210.78.25.226 – 10.78.25.22610.78.25.226
3610.78.25.227/3210.78.25.227 – 10.78.25.22710.78.25.227
3710.78.25.228/3210.78.25.228 – 10.78.25.22810.78.25.228
3810.78.25.229/3210.78.25.229 – 10.78.25.22910.78.25.229
3910.78.25.230/3210.78.25.230 – 10.78.25.23010.78.25.230
4010.78.25.231/3210.78.25.231 – 10.78.25.23110.78.25.231
4110.78.25.232/3210.78.25.232 – 10.78.25.23210.78.25.232
4210.78.25.233/3210.78.25.233 – 10.78.25.23310.78.25.233
4310.78.25.234/3210.78.25.234 – 10.78.25.23410.78.25.234
4410.78.25.235/3210.78.25.235 – 10.78.25.23510.78.25.235
4510.78.25.236/3210.78.25.236 – 10.78.25.23610.78.25.236
4610.78.25.237/3210.78.25.237 – 10.78.25.23710.78.25.237
4710.78.25.238/3210.78.25.238 – 10.78.25.23810.78.25.238
4810.78.25.239/3210.78.25.239 – 10.78.25.23910.78.25.239
4910.78.25.240/3210.78.25.240 – 10.78.25.24010.78.25.240
5010.78.25.241/3210.78.25.241 – 10.78.25.24110.78.25.241
5110.78.25.242/3210.78.25.242 – 10.78.25.24210.78.25.242
5210.78.25.243/3210.78.25.243 – 10.78.25.24310.78.25.243
5310.78.25.244/3210.78.25.244 – 10.78.25.24410.78.25.244
5410.78.25.245/3210.78.25.245 – 10.78.25.24510.78.25.245
5510.78.25.246/3210.78.25.246 – 10.78.25.24610.78.25.246
5610.78.25.247/3210.78.25.247 – 10.78.25.24710.78.25.247
5710.78.25.248/3210.78.25.248 – 10.78.25.24810.78.25.248
5810.78.25.249/3210.78.25.249 – 10.78.25.24910.78.25.249
5910.78.25.250/3210.78.25.250 – 10.78.25.25010.78.25.250
6010.78.25.251/3210.78.25.251 – 10.78.25.25110.78.25.251
6110.78.25.252/3210.78.25.252 – 10.78.25.25210.78.25.252
6210.78.25.253/3210.78.25.253 – 10.78.25.25310.78.25.253
6310.78.25.254/3210.78.25.254 – 10.78.25.25410.78.25.254
6410.78.25.255/3210.78.25.255 – 10.78.25.25510.78.25.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →