ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.243.0/26
network10.78.243.0/26
broadcast10.78.243.63
first host10.78.243.1
last host10.78.243.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.243.0/26
address00001010.01001110.11110011.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.11110011.00000000
broadcast00001010.01001110.11110011.00111111
green = network part, grey = host part
hex0x0a4ef300
decimal172946176
reverse dns0.243.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:f300

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.78.243.0/3110.78.243.0 – 10.78.243.110.78.243.1
210.78.243.2/3110.78.243.2 – 10.78.243.310.78.243.3
310.78.243.4/3110.78.243.4 – 10.78.243.510.78.243.5
410.78.243.6/3110.78.243.6 – 10.78.243.710.78.243.7
510.78.243.8/3110.78.243.8 – 10.78.243.910.78.243.9
610.78.243.10/3110.78.243.10 – 10.78.243.1110.78.243.11
710.78.243.12/3110.78.243.12 – 10.78.243.1310.78.243.13
810.78.243.14/3110.78.243.14 – 10.78.243.1510.78.243.15
910.78.243.16/3110.78.243.16 – 10.78.243.1710.78.243.17
1010.78.243.18/3110.78.243.18 – 10.78.243.1910.78.243.19
1110.78.243.20/3110.78.243.20 – 10.78.243.2110.78.243.21
1210.78.243.22/3110.78.243.22 – 10.78.243.2310.78.243.23
1310.78.243.24/3110.78.243.24 – 10.78.243.2510.78.243.25
1410.78.243.26/3110.78.243.26 – 10.78.243.2710.78.243.27
1510.78.243.28/3110.78.243.28 – 10.78.243.2910.78.243.29
1610.78.243.30/3110.78.243.30 – 10.78.243.3110.78.243.31
1710.78.243.32/3110.78.243.32 – 10.78.243.3310.78.243.33
1810.78.243.34/3110.78.243.34 – 10.78.243.3510.78.243.35
1910.78.243.36/3110.78.243.36 – 10.78.243.3710.78.243.37
2010.78.243.38/3110.78.243.38 – 10.78.243.3910.78.243.39
2110.78.243.40/3110.78.243.40 – 10.78.243.4110.78.243.41
2210.78.243.42/3110.78.243.42 – 10.78.243.4310.78.243.43
2310.78.243.44/3110.78.243.44 – 10.78.243.4510.78.243.45
2410.78.243.46/3110.78.243.46 – 10.78.243.4710.78.243.47
2510.78.243.48/3110.78.243.48 – 10.78.243.4910.78.243.49
2610.78.243.50/3110.78.243.50 – 10.78.243.5110.78.243.51
2710.78.243.52/3110.78.243.52 – 10.78.243.5310.78.243.53
2810.78.243.54/3110.78.243.54 – 10.78.243.5510.78.243.55
2910.78.243.56/3110.78.243.56 – 10.78.243.5710.78.243.57
3010.78.243.58/3110.78.243.58 – 10.78.243.5910.78.243.59
3110.78.243.60/3110.78.243.60 – 10.78.243.6110.78.243.61
3210.78.243.62/3110.78.243.62 – 10.78.243.6310.78.243.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →