ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.240.0/22
network10.78.240.0/22
broadcast10.78.243.255
first host10.78.240.1
last host10.78.243.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.78.240.0/22
address00001010.01001110.11110000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01001110.11110000.00000000
broadcast00001010.01001110.11110011.11111111
green = network part, grey = host part
hex0x0a4ef000
decimal172945408
reverse dns0.240.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:f000

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.240.0/2810.78.240.1 – 10.78.240.1410.78.240.15
210.78.240.16/2810.78.240.17 – 10.78.240.3010.78.240.31
310.78.240.32/2810.78.240.33 – 10.78.240.4610.78.240.47
410.78.240.48/2810.78.240.49 – 10.78.240.6210.78.240.63
510.78.240.64/2810.78.240.65 – 10.78.240.7810.78.240.79
610.78.240.80/2810.78.240.81 – 10.78.240.9410.78.240.95
710.78.240.96/2810.78.240.97 – 10.78.240.11010.78.240.111
810.78.240.112/2810.78.240.113 – 10.78.240.12610.78.240.127
910.78.240.128/2810.78.240.129 – 10.78.240.14210.78.240.143
1010.78.240.144/2810.78.240.145 – 10.78.240.15810.78.240.159
1110.78.240.160/2810.78.240.161 – 10.78.240.17410.78.240.175
1210.78.240.176/2810.78.240.177 – 10.78.240.19010.78.240.191
1310.78.240.192/2810.78.240.193 – 10.78.240.20610.78.240.207
1410.78.240.208/2810.78.240.209 – 10.78.240.22210.78.240.223
1510.78.240.224/2810.78.240.225 – 10.78.240.23810.78.240.239
1610.78.240.240/2810.78.240.241 – 10.78.240.25410.78.240.255
1710.78.241.0/2810.78.241.1 – 10.78.241.1410.78.241.15
1810.78.241.16/2810.78.241.17 – 10.78.241.3010.78.241.31
1910.78.241.32/2810.78.241.33 – 10.78.241.4610.78.241.47
2010.78.241.48/2810.78.241.49 – 10.78.241.6210.78.241.63
2110.78.241.64/2810.78.241.65 – 10.78.241.7810.78.241.79
2210.78.241.80/2810.78.241.81 – 10.78.241.9410.78.241.95
2310.78.241.96/2810.78.241.97 – 10.78.241.11010.78.241.111
2410.78.241.112/2810.78.241.113 – 10.78.241.12610.78.241.127
2510.78.241.128/2810.78.241.129 – 10.78.241.14210.78.241.143
2610.78.241.144/2810.78.241.145 – 10.78.241.15810.78.241.159
2710.78.241.160/2810.78.241.161 – 10.78.241.17410.78.241.175
2810.78.241.176/2810.78.241.177 – 10.78.241.19010.78.241.191
2910.78.241.192/2810.78.241.193 – 10.78.241.20610.78.241.207
3010.78.241.208/2810.78.241.209 – 10.78.241.22210.78.241.223
3110.78.241.224/2810.78.241.225 – 10.78.241.23810.78.241.239
3210.78.241.240/2810.78.241.241 – 10.78.241.25410.78.241.255
3310.78.242.0/2810.78.242.1 – 10.78.242.1410.78.242.15
3410.78.242.16/2810.78.242.17 – 10.78.242.3010.78.242.31
3510.78.242.32/2810.78.242.33 – 10.78.242.4610.78.242.47
3610.78.242.48/2810.78.242.49 – 10.78.242.6210.78.242.63
3710.78.242.64/2810.78.242.65 – 10.78.242.7810.78.242.79
3810.78.242.80/2810.78.242.81 – 10.78.242.9410.78.242.95
3910.78.242.96/2810.78.242.97 – 10.78.242.11010.78.242.111
4010.78.242.112/2810.78.242.113 – 10.78.242.12610.78.242.127
4110.78.242.128/2810.78.242.129 – 10.78.242.14210.78.242.143
4210.78.242.144/2810.78.242.145 – 10.78.242.15810.78.242.159
4310.78.242.160/2810.78.242.161 – 10.78.242.17410.78.242.175
4410.78.242.176/2810.78.242.177 – 10.78.242.19010.78.242.191
4510.78.242.192/2810.78.242.193 – 10.78.242.20610.78.242.207
4610.78.242.208/2810.78.242.209 – 10.78.242.22210.78.242.223
4710.78.242.224/2810.78.242.225 – 10.78.242.23810.78.242.239
4810.78.242.240/2810.78.242.241 – 10.78.242.25410.78.242.255
4910.78.243.0/2810.78.243.1 – 10.78.243.1410.78.243.15
5010.78.243.16/2810.78.243.17 – 10.78.243.3010.78.243.31
5110.78.243.32/2810.78.243.33 – 10.78.243.4610.78.243.47
5210.78.243.48/2810.78.243.49 – 10.78.243.6210.78.243.63
5310.78.243.64/2810.78.243.65 – 10.78.243.7810.78.243.79
5410.78.243.80/2810.78.243.81 – 10.78.243.9410.78.243.95
5510.78.243.96/2810.78.243.97 – 10.78.243.11010.78.243.111
5610.78.243.112/2810.78.243.113 – 10.78.243.12610.78.243.127
5710.78.243.128/2810.78.243.129 – 10.78.243.14210.78.243.143
5810.78.243.144/2810.78.243.145 – 10.78.243.15810.78.243.159
5910.78.243.160/2810.78.243.161 – 10.78.243.17410.78.243.175
6010.78.243.176/2810.78.243.177 – 10.78.243.19010.78.243.191
6110.78.243.192/2810.78.243.193 – 10.78.243.20610.78.243.207
6210.78.243.208/2810.78.243.209 – 10.78.243.22210.78.243.223
6310.78.243.224/2810.78.243.225 – 10.78.243.23810.78.243.239
6410.78.243.240/2810.78.243.241 – 10.78.243.25410.78.243.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →