ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.233.0/26
network10.78.233.0/26
broadcast10.78.233.63
first host10.78.233.1
last host10.78.233.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.233.0/26
address00001010.01001110.11101001.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.11101001.00000000
broadcast00001010.01001110.11101001.00111111
green = network part, grey = host part
hex0x0a4ee900
decimal172943616
reverse dns0.233.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:e900

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.233.0/3210.78.233.0 – 10.78.233.010.78.233.0
210.78.233.1/3210.78.233.1 – 10.78.233.110.78.233.1
310.78.233.2/3210.78.233.2 – 10.78.233.210.78.233.2
410.78.233.3/3210.78.233.3 – 10.78.233.310.78.233.3
510.78.233.4/3210.78.233.4 – 10.78.233.410.78.233.4
610.78.233.5/3210.78.233.5 – 10.78.233.510.78.233.5
710.78.233.6/3210.78.233.6 – 10.78.233.610.78.233.6
810.78.233.7/3210.78.233.7 – 10.78.233.710.78.233.7
910.78.233.8/3210.78.233.8 – 10.78.233.810.78.233.8
1010.78.233.9/3210.78.233.9 – 10.78.233.910.78.233.9
1110.78.233.10/3210.78.233.10 – 10.78.233.1010.78.233.10
1210.78.233.11/3210.78.233.11 – 10.78.233.1110.78.233.11
1310.78.233.12/3210.78.233.12 – 10.78.233.1210.78.233.12
1410.78.233.13/3210.78.233.13 – 10.78.233.1310.78.233.13
1510.78.233.14/3210.78.233.14 – 10.78.233.1410.78.233.14
1610.78.233.15/3210.78.233.15 – 10.78.233.1510.78.233.15
1710.78.233.16/3210.78.233.16 – 10.78.233.1610.78.233.16
1810.78.233.17/3210.78.233.17 – 10.78.233.1710.78.233.17
1910.78.233.18/3210.78.233.18 – 10.78.233.1810.78.233.18
2010.78.233.19/3210.78.233.19 – 10.78.233.1910.78.233.19
2110.78.233.20/3210.78.233.20 – 10.78.233.2010.78.233.20
2210.78.233.21/3210.78.233.21 – 10.78.233.2110.78.233.21
2310.78.233.22/3210.78.233.22 – 10.78.233.2210.78.233.22
2410.78.233.23/3210.78.233.23 – 10.78.233.2310.78.233.23
2510.78.233.24/3210.78.233.24 – 10.78.233.2410.78.233.24
2610.78.233.25/3210.78.233.25 – 10.78.233.2510.78.233.25
2710.78.233.26/3210.78.233.26 – 10.78.233.2610.78.233.26
2810.78.233.27/3210.78.233.27 – 10.78.233.2710.78.233.27
2910.78.233.28/3210.78.233.28 – 10.78.233.2810.78.233.28
3010.78.233.29/3210.78.233.29 – 10.78.233.2910.78.233.29
3110.78.233.30/3210.78.233.30 – 10.78.233.3010.78.233.30
3210.78.233.31/3210.78.233.31 – 10.78.233.3110.78.233.31
3310.78.233.32/3210.78.233.32 – 10.78.233.3210.78.233.32
3410.78.233.33/3210.78.233.33 – 10.78.233.3310.78.233.33
3510.78.233.34/3210.78.233.34 – 10.78.233.3410.78.233.34
3610.78.233.35/3210.78.233.35 – 10.78.233.3510.78.233.35
3710.78.233.36/3210.78.233.36 – 10.78.233.3610.78.233.36
3810.78.233.37/3210.78.233.37 – 10.78.233.3710.78.233.37
3910.78.233.38/3210.78.233.38 – 10.78.233.3810.78.233.38
4010.78.233.39/3210.78.233.39 – 10.78.233.3910.78.233.39
4110.78.233.40/3210.78.233.40 – 10.78.233.4010.78.233.40
4210.78.233.41/3210.78.233.41 – 10.78.233.4110.78.233.41
4310.78.233.42/3210.78.233.42 – 10.78.233.4210.78.233.42
4410.78.233.43/3210.78.233.43 – 10.78.233.4310.78.233.43
4510.78.233.44/3210.78.233.44 – 10.78.233.4410.78.233.44
4610.78.233.45/3210.78.233.45 – 10.78.233.4510.78.233.45
4710.78.233.46/3210.78.233.46 – 10.78.233.4610.78.233.46
4810.78.233.47/3210.78.233.47 – 10.78.233.4710.78.233.47
4910.78.233.48/3210.78.233.48 – 10.78.233.4810.78.233.48
5010.78.233.49/3210.78.233.49 – 10.78.233.4910.78.233.49
5110.78.233.50/3210.78.233.50 – 10.78.233.5010.78.233.50
5210.78.233.51/3210.78.233.51 – 10.78.233.5110.78.233.51
5310.78.233.52/3210.78.233.52 – 10.78.233.5210.78.233.52
5410.78.233.53/3210.78.233.53 – 10.78.233.5310.78.233.53
5510.78.233.54/3210.78.233.54 – 10.78.233.5410.78.233.54
5610.78.233.55/3210.78.233.55 – 10.78.233.5510.78.233.55
5710.78.233.56/3210.78.233.56 – 10.78.233.5610.78.233.56
5810.78.233.57/3210.78.233.57 – 10.78.233.5710.78.233.57
5910.78.233.58/3210.78.233.58 – 10.78.233.5810.78.233.58
6010.78.233.59/3210.78.233.59 – 10.78.233.5910.78.233.59
6110.78.233.60/3210.78.233.60 – 10.78.233.6010.78.233.60
6210.78.233.61/3210.78.233.61 – 10.78.233.6110.78.233.61
6310.78.233.62/3210.78.233.62 – 10.78.233.6210.78.233.62
6410.78.233.63/3210.78.233.63 – 10.78.233.6310.78.233.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →