ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.78.202.0/24
network10.78.202.0/24
broadcast10.78.202.255
first host10.78.202.1
last host10.78.202.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.78.202.0/24
address00001010.01001110.11001010.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001110.11001010.00000000
broadcast00001010.01001110.11001010.11111111
green = network part, grey = host part
hex0x0a4eca00
decimal172935680
reverse dns0.202.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:ca00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.202.0/3010.78.202.1 – 10.78.202.210.78.202.3
210.78.202.4/3010.78.202.5 – 10.78.202.610.78.202.7
310.78.202.8/3010.78.202.9 – 10.78.202.1010.78.202.11
410.78.202.12/3010.78.202.13 – 10.78.202.1410.78.202.15
510.78.202.16/3010.78.202.17 – 10.78.202.1810.78.202.19
610.78.202.20/3010.78.202.21 – 10.78.202.2210.78.202.23
710.78.202.24/3010.78.202.25 – 10.78.202.2610.78.202.27
810.78.202.28/3010.78.202.29 – 10.78.202.3010.78.202.31
910.78.202.32/3010.78.202.33 – 10.78.202.3410.78.202.35
1010.78.202.36/3010.78.202.37 – 10.78.202.3810.78.202.39
1110.78.202.40/3010.78.202.41 – 10.78.202.4210.78.202.43
1210.78.202.44/3010.78.202.45 – 10.78.202.4610.78.202.47
1310.78.202.48/3010.78.202.49 – 10.78.202.5010.78.202.51
1410.78.202.52/3010.78.202.53 – 10.78.202.5410.78.202.55
1510.78.202.56/3010.78.202.57 – 10.78.202.5810.78.202.59
1610.78.202.60/3010.78.202.61 – 10.78.202.6210.78.202.63
1710.78.202.64/3010.78.202.65 – 10.78.202.6610.78.202.67
1810.78.202.68/3010.78.202.69 – 10.78.202.7010.78.202.71
1910.78.202.72/3010.78.202.73 – 10.78.202.7410.78.202.75
2010.78.202.76/3010.78.202.77 – 10.78.202.7810.78.202.79
2110.78.202.80/3010.78.202.81 – 10.78.202.8210.78.202.83
2210.78.202.84/3010.78.202.85 – 10.78.202.8610.78.202.87
2310.78.202.88/3010.78.202.89 – 10.78.202.9010.78.202.91
2410.78.202.92/3010.78.202.93 – 10.78.202.9410.78.202.95
2510.78.202.96/3010.78.202.97 – 10.78.202.9810.78.202.99
2610.78.202.100/3010.78.202.101 – 10.78.202.10210.78.202.103
2710.78.202.104/3010.78.202.105 – 10.78.202.10610.78.202.107
2810.78.202.108/3010.78.202.109 – 10.78.202.11010.78.202.111
2910.78.202.112/3010.78.202.113 – 10.78.202.11410.78.202.115
3010.78.202.116/3010.78.202.117 – 10.78.202.11810.78.202.119
3110.78.202.120/3010.78.202.121 – 10.78.202.12210.78.202.123
3210.78.202.124/3010.78.202.125 – 10.78.202.12610.78.202.127
3310.78.202.128/3010.78.202.129 – 10.78.202.13010.78.202.131
3410.78.202.132/3010.78.202.133 – 10.78.202.13410.78.202.135
3510.78.202.136/3010.78.202.137 – 10.78.202.13810.78.202.139
3610.78.202.140/3010.78.202.141 – 10.78.202.14210.78.202.143
3710.78.202.144/3010.78.202.145 – 10.78.202.14610.78.202.147
3810.78.202.148/3010.78.202.149 – 10.78.202.15010.78.202.151
3910.78.202.152/3010.78.202.153 – 10.78.202.15410.78.202.155
4010.78.202.156/3010.78.202.157 – 10.78.202.15810.78.202.159
4110.78.202.160/3010.78.202.161 – 10.78.202.16210.78.202.163
4210.78.202.164/3010.78.202.165 – 10.78.202.16610.78.202.167
4310.78.202.168/3010.78.202.169 – 10.78.202.17010.78.202.171
4410.78.202.172/3010.78.202.173 – 10.78.202.17410.78.202.175
4510.78.202.176/3010.78.202.177 – 10.78.202.17810.78.202.179
4610.78.202.180/3010.78.202.181 – 10.78.202.18210.78.202.183
4710.78.202.184/3010.78.202.185 – 10.78.202.18610.78.202.187
4810.78.202.188/3010.78.202.189 – 10.78.202.19010.78.202.191
4910.78.202.192/3010.78.202.193 – 10.78.202.19410.78.202.195
5010.78.202.196/3010.78.202.197 – 10.78.202.19810.78.202.199
5110.78.202.200/3010.78.202.201 – 10.78.202.20210.78.202.203
5210.78.202.204/3010.78.202.205 – 10.78.202.20610.78.202.207
5310.78.202.208/3010.78.202.209 – 10.78.202.21010.78.202.211
5410.78.202.212/3010.78.202.213 – 10.78.202.21410.78.202.215
5510.78.202.216/3010.78.202.217 – 10.78.202.21810.78.202.219
5610.78.202.220/3010.78.202.221 – 10.78.202.22210.78.202.223
5710.78.202.224/3010.78.202.225 – 10.78.202.22610.78.202.227
5810.78.202.228/3010.78.202.229 – 10.78.202.23010.78.202.231
5910.78.202.232/3010.78.202.233 – 10.78.202.23410.78.202.235
6010.78.202.236/3010.78.202.237 – 10.78.202.23810.78.202.239
6110.78.202.240/3010.78.202.241 – 10.78.202.24210.78.202.243
6210.78.202.244/3010.78.202.245 – 10.78.202.24610.78.202.247
6310.78.202.248/3010.78.202.249 – 10.78.202.25010.78.202.251
6410.78.202.252/3010.78.202.253 – 10.78.202.25410.78.202.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →