ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.172.0/22
network10.78.172.0/22
broadcast10.78.175.255
first host10.78.172.1
last host10.78.175.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.78.172.0/22
address00001010.01001110.10101100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01001110.10101100.00000000
broadcast00001010.01001110.10101111.11111111
green = network part, grey = host part
hex0x0a4eac00
decimal172928000
reverse dns0.172.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:ac00

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.172.0/2810.78.172.1 – 10.78.172.1410.78.172.15
210.78.172.16/2810.78.172.17 – 10.78.172.3010.78.172.31
310.78.172.32/2810.78.172.33 – 10.78.172.4610.78.172.47
410.78.172.48/2810.78.172.49 – 10.78.172.6210.78.172.63
510.78.172.64/2810.78.172.65 – 10.78.172.7810.78.172.79
610.78.172.80/2810.78.172.81 – 10.78.172.9410.78.172.95
710.78.172.96/2810.78.172.97 – 10.78.172.11010.78.172.111
810.78.172.112/2810.78.172.113 – 10.78.172.12610.78.172.127
910.78.172.128/2810.78.172.129 – 10.78.172.14210.78.172.143
1010.78.172.144/2810.78.172.145 – 10.78.172.15810.78.172.159
1110.78.172.160/2810.78.172.161 – 10.78.172.17410.78.172.175
1210.78.172.176/2810.78.172.177 – 10.78.172.19010.78.172.191
1310.78.172.192/2810.78.172.193 – 10.78.172.20610.78.172.207
1410.78.172.208/2810.78.172.209 – 10.78.172.22210.78.172.223
1510.78.172.224/2810.78.172.225 – 10.78.172.23810.78.172.239
1610.78.172.240/2810.78.172.241 – 10.78.172.25410.78.172.255
1710.78.173.0/2810.78.173.1 – 10.78.173.1410.78.173.15
1810.78.173.16/2810.78.173.17 – 10.78.173.3010.78.173.31
1910.78.173.32/2810.78.173.33 – 10.78.173.4610.78.173.47
2010.78.173.48/2810.78.173.49 – 10.78.173.6210.78.173.63
2110.78.173.64/2810.78.173.65 – 10.78.173.7810.78.173.79
2210.78.173.80/2810.78.173.81 – 10.78.173.9410.78.173.95
2310.78.173.96/2810.78.173.97 – 10.78.173.11010.78.173.111
2410.78.173.112/2810.78.173.113 – 10.78.173.12610.78.173.127
2510.78.173.128/2810.78.173.129 – 10.78.173.14210.78.173.143
2610.78.173.144/2810.78.173.145 – 10.78.173.15810.78.173.159
2710.78.173.160/2810.78.173.161 – 10.78.173.17410.78.173.175
2810.78.173.176/2810.78.173.177 – 10.78.173.19010.78.173.191
2910.78.173.192/2810.78.173.193 – 10.78.173.20610.78.173.207
3010.78.173.208/2810.78.173.209 – 10.78.173.22210.78.173.223
3110.78.173.224/2810.78.173.225 – 10.78.173.23810.78.173.239
3210.78.173.240/2810.78.173.241 – 10.78.173.25410.78.173.255
3310.78.174.0/2810.78.174.1 – 10.78.174.1410.78.174.15
3410.78.174.16/2810.78.174.17 – 10.78.174.3010.78.174.31
3510.78.174.32/2810.78.174.33 – 10.78.174.4610.78.174.47
3610.78.174.48/2810.78.174.49 – 10.78.174.6210.78.174.63
3710.78.174.64/2810.78.174.65 – 10.78.174.7810.78.174.79
3810.78.174.80/2810.78.174.81 – 10.78.174.9410.78.174.95
3910.78.174.96/2810.78.174.97 – 10.78.174.11010.78.174.111
4010.78.174.112/2810.78.174.113 – 10.78.174.12610.78.174.127
4110.78.174.128/2810.78.174.129 – 10.78.174.14210.78.174.143
4210.78.174.144/2810.78.174.145 – 10.78.174.15810.78.174.159
4310.78.174.160/2810.78.174.161 – 10.78.174.17410.78.174.175
4410.78.174.176/2810.78.174.177 – 10.78.174.19010.78.174.191
4510.78.174.192/2810.78.174.193 – 10.78.174.20610.78.174.207
4610.78.174.208/2810.78.174.209 – 10.78.174.22210.78.174.223
4710.78.174.224/2810.78.174.225 – 10.78.174.23810.78.174.239
4810.78.174.240/2810.78.174.241 – 10.78.174.25410.78.174.255
4910.78.175.0/2810.78.175.1 – 10.78.175.1410.78.175.15
5010.78.175.16/2810.78.175.17 – 10.78.175.3010.78.175.31
5110.78.175.32/2810.78.175.33 – 10.78.175.4610.78.175.47
5210.78.175.48/2810.78.175.49 – 10.78.175.6210.78.175.63
5310.78.175.64/2810.78.175.65 – 10.78.175.7810.78.175.79
5410.78.175.80/2810.78.175.81 – 10.78.175.9410.78.175.95
5510.78.175.96/2810.78.175.97 – 10.78.175.11010.78.175.111
5610.78.175.112/2810.78.175.113 – 10.78.175.12610.78.175.127
5710.78.175.128/2810.78.175.129 – 10.78.175.14210.78.175.143
5810.78.175.144/2810.78.175.145 – 10.78.175.15810.78.175.159
5910.78.175.160/2810.78.175.161 – 10.78.175.17410.78.175.175
6010.78.175.176/2810.78.175.177 – 10.78.175.19010.78.175.191
6110.78.175.192/2810.78.175.193 – 10.78.175.20610.78.175.207
6210.78.175.208/2810.78.175.209 – 10.78.175.22210.78.175.223
6310.78.175.224/2810.78.175.225 – 10.78.175.23810.78.175.239
6410.78.175.240/2810.78.175.241 – 10.78.175.25410.78.175.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →