ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.171.0/24
network10.78.171.0/24
broadcast10.78.171.255
first host10.78.171.1
last host10.78.171.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.78.171.0/24
address00001010.01001110.10101011.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001110.10101011.00000000
broadcast00001010.01001110.10101011.11111111
green = network part, grey = host part
hex0x0a4eab00
decimal172927744
reverse dns0.171.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:ab00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.171.0/3010.78.171.1 – 10.78.171.210.78.171.3
210.78.171.4/3010.78.171.5 – 10.78.171.610.78.171.7
310.78.171.8/3010.78.171.9 – 10.78.171.1010.78.171.11
410.78.171.12/3010.78.171.13 – 10.78.171.1410.78.171.15
510.78.171.16/3010.78.171.17 – 10.78.171.1810.78.171.19
610.78.171.20/3010.78.171.21 – 10.78.171.2210.78.171.23
710.78.171.24/3010.78.171.25 – 10.78.171.2610.78.171.27
810.78.171.28/3010.78.171.29 – 10.78.171.3010.78.171.31
910.78.171.32/3010.78.171.33 – 10.78.171.3410.78.171.35
1010.78.171.36/3010.78.171.37 – 10.78.171.3810.78.171.39
1110.78.171.40/3010.78.171.41 – 10.78.171.4210.78.171.43
1210.78.171.44/3010.78.171.45 – 10.78.171.4610.78.171.47
1310.78.171.48/3010.78.171.49 – 10.78.171.5010.78.171.51
1410.78.171.52/3010.78.171.53 – 10.78.171.5410.78.171.55
1510.78.171.56/3010.78.171.57 – 10.78.171.5810.78.171.59
1610.78.171.60/3010.78.171.61 – 10.78.171.6210.78.171.63
1710.78.171.64/3010.78.171.65 – 10.78.171.6610.78.171.67
1810.78.171.68/3010.78.171.69 – 10.78.171.7010.78.171.71
1910.78.171.72/3010.78.171.73 – 10.78.171.7410.78.171.75
2010.78.171.76/3010.78.171.77 – 10.78.171.7810.78.171.79
2110.78.171.80/3010.78.171.81 – 10.78.171.8210.78.171.83
2210.78.171.84/3010.78.171.85 – 10.78.171.8610.78.171.87
2310.78.171.88/3010.78.171.89 – 10.78.171.9010.78.171.91
2410.78.171.92/3010.78.171.93 – 10.78.171.9410.78.171.95
2510.78.171.96/3010.78.171.97 – 10.78.171.9810.78.171.99
2610.78.171.100/3010.78.171.101 – 10.78.171.10210.78.171.103
2710.78.171.104/3010.78.171.105 – 10.78.171.10610.78.171.107
2810.78.171.108/3010.78.171.109 – 10.78.171.11010.78.171.111
2910.78.171.112/3010.78.171.113 – 10.78.171.11410.78.171.115
3010.78.171.116/3010.78.171.117 – 10.78.171.11810.78.171.119
3110.78.171.120/3010.78.171.121 – 10.78.171.12210.78.171.123
3210.78.171.124/3010.78.171.125 – 10.78.171.12610.78.171.127
3310.78.171.128/3010.78.171.129 – 10.78.171.13010.78.171.131
3410.78.171.132/3010.78.171.133 – 10.78.171.13410.78.171.135
3510.78.171.136/3010.78.171.137 – 10.78.171.13810.78.171.139
3610.78.171.140/3010.78.171.141 – 10.78.171.14210.78.171.143
3710.78.171.144/3010.78.171.145 – 10.78.171.14610.78.171.147
3810.78.171.148/3010.78.171.149 – 10.78.171.15010.78.171.151
3910.78.171.152/3010.78.171.153 – 10.78.171.15410.78.171.155
4010.78.171.156/3010.78.171.157 – 10.78.171.15810.78.171.159
4110.78.171.160/3010.78.171.161 – 10.78.171.16210.78.171.163
4210.78.171.164/3010.78.171.165 – 10.78.171.16610.78.171.167
4310.78.171.168/3010.78.171.169 – 10.78.171.17010.78.171.171
4410.78.171.172/3010.78.171.173 – 10.78.171.17410.78.171.175
4510.78.171.176/3010.78.171.177 – 10.78.171.17810.78.171.179
4610.78.171.180/3010.78.171.181 – 10.78.171.18210.78.171.183
4710.78.171.184/3010.78.171.185 – 10.78.171.18610.78.171.187
4810.78.171.188/3010.78.171.189 – 10.78.171.19010.78.171.191
4910.78.171.192/3010.78.171.193 – 10.78.171.19410.78.171.195
5010.78.171.196/3010.78.171.197 – 10.78.171.19810.78.171.199
5110.78.171.200/3010.78.171.201 – 10.78.171.20210.78.171.203
5210.78.171.204/3010.78.171.205 – 10.78.171.20610.78.171.207
5310.78.171.208/3010.78.171.209 – 10.78.171.21010.78.171.211
5410.78.171.212/3010.78.171.213 – 10.78.171.21410.78.171.215
5510.78.171.216/3010.78.171.217 – 10.78.171.21810.78.171.219
5610.78.171.220/3010.78.171.221 – 10.78.171.22210.78.171.223
5710.78.171.224/3010.78.171.225 – 10.78.171.22610.78.171.227
5810.78.171.228/3010.78.171.229 – 10.78.171.23010.78.171.231
5910.78.171.232/3010.78.171.233 – 10.78.171.23410.78.171.235
6010.78.171.236/3010.78.171.237 – 10.78.171.23810.78.171.239
6110.78.171.240/3010.78.171.241 – 10.78.171.24210.78.171.243
6210.78.171.244/3010.78.171.245 – 10.78.171.24610.78.171.247
6310.78.171.248/3010.78.171.249 – 10.78.171.25010.78.171.251
6410.78.171.252/3010.78.171.253 – 10.78.171.25410.78.171.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →