ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.152.64/26
network10.78.152.64/26
broadcast10.78.152.127
first host10.78.152.65
last host10.78.152.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.152.64/26
address00001010.01001110.10011000.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.10011000.01000000
broadcast00001010.01001110.10011000.01111111
green = network part, grey = host part
hex0x0a4e9840
decimal172922944
reverse dns64.152.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:9840

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.152.64/3210.78.152.64 – 10.78.152.6410.78.152.64
210.78.152.65/3210.78.152.65 – 10.78.152.6510.78.152.65
310.78.152.66/3210.78.152.66 – 10.78.152.6610.78.152.66
410.78.152.67/3210.78.152.67 – 10.78.152.6710.78.152.67
510.78.152.68/3210.78.152.68 – 10.78.152.6810.78.152.68
610.78.152.69/3210.78.152.69 – 10.78.152.6910.78.152.69
710.78.152.70/3210.78.152.70 – 10.78.152.7010.78.152.70
810.78.152.71/3210.78.152.71 – 10.78.152.7110.78.152.71
910.78.152.72/3210.78.152.72 – 10.78.152.7210.78.152.72
1010.78.152.73/3210.78.152.73 – 10.78.152.7310.78.152.73
1110.78.152.74/3210.78.152.74 – 10.78.152.7410.78.152.74
1210.78.152.75/3210.78.152.75 – 10.78.152.7510.78.152.75
1310.78.152.76/3210.78.152.76 – 10.78.152.7610.78.152.76
1410.78.152.77/3210.78.152.77 – 10.78.152.7710.78.152.77
1510.78.152.78/3210.78.152.78 – 10.78.152.7810.78.152.78
1610.78.152.79/3210.78.152.79 – 10.78.152.7910.78.152.79
1710.78.152.80/3210.78.152.80 – 10.78.152.8010.78.152.80
1810.78.152.81/3210.78.152.81 – 10.78.152.8110.78.152.81
1910.78.152.82/3210.78.152.82 – 10.78.152.8210.78.152.82
2010.78.152.83/3210.78.152.83 – 10.78.152.8310.78.152.83
2110.78.152.84/3210.78.152.84 – 10.78.152.8410.78.152.84
2210.78.152.85/3210.78.152.85 – 10.78.152.8510.78.152.85
2310.78.152.86/3210.78.152.86 – 10.78.152.8610.78.152.86
2410.78.152.87/3210.78.152.87 – 10.78.152.8710.78.152.87
2510.78.152.88/3210.78.152.88 – 10.78.152.8810.78.152.88
2610.78.152.89/3210.78.152.89 – 10.78.152.8910.78.152.89
2710.78.152.90/3210.78.152.90 – 10.78.152.9010.78.152.90
2810.78.152.91/3210.78.152.91 – 10.78.152.9110.78.152.91
2910.78.152.92/3210.78.152.92 – 10.78.152.9210.78.152.92
3010.78.152.93/3210.78.152.93 – 10.78.152.9310.78.152.93
3110.78.152.94/3210.78.152.94 – 10.78.152.9410.78.152.94
3210.78.152.95/3210.78.152.95 – 10.78.152.9510.78.152.95
3310.78.152.96/3210.78.152.96 – 10.78.152.9610.78.152.96
3410.78.152.97/3210.78.152.97 – 10.78.152.9710.78.152.97
3510.78.152.98/3210.78.152.98 – 10.78.152.9810.78.152.98
3610.78.152.99/3210.78.152.99 – 10.78.152.9910.78.152.99
3710.78.152.100/3210.78.152.100 – 10.78.152.10010.78.152.100
3810.78.152.101/3210.78.152.101 – 10.78.152.10110.78.152.101
3910.78.152.102/3210.78.152.102 – 10.78.152.10210.78.152.102
4010.78.152.103/3210.78.152.103 – 10.78.152.10310.78.152.103
4110.78.152.104/3210.78.152.104 – 10.78.152.10410.78.152.104
4210.78.152.105/3210.78.152.105 – 10.78.152.10510.78.152.105
4310.78.152.106/3210.78.152.106 – 10.78.152.10610.78.152.106
4410.78.152.107/3210.78.152.107 – 10.78.152.10710.78.152.107
4510.78.152.108/3210.78.152.108 – 10.78.152.10810.78.152.108
4610.78.152.109/3210.78.152.109 – 10.78.152.10910.78.152.109
4710.78.152.110/3210.78.152.110 – 10.78.152.11010.78.152.110
4810.78.152.111/3210.78.152.111 – 10.78.152.11110.78.152.111
4910.78.152.112/3210.78.152.112 – 10.78.152.11210.78.152.112
5010.78.152.113/3210.78.152.113 – 10.78.152.11310.78.152.113
5110.78.152.114/3210.78.152.114 – 10.78.152.11410.78.152.114
5210.78.152.115/3210.78.152.115 – 10.78.152.11510.78.152.115
5310.78.152.116/3210.78.152.116 – 10.78.152.11610.78.152.116
5410.78.152.117/3210.78.152.117 – 10.78.152.11710.78.152.117
5510.78.152.118/3210.78.152.118 – 10.78.152.11810.78.152.118
5610.78.152.119/3210.78.152.119 – 10.78.152.11910.78.152.119
5710.78.152.120/3210.78.152.120 – 10.78.152.12010.78.152.120
5810.78.152.121/3210.78.152.121 – 10.78.152.12110.78.152.121
5910.78.152.122/3210.78.152.122 – 10.78.152.12210.78.152.122
6010.78.152.123/3210.78.152.123 – 10.78.152.12310.78.152.123
6110.78.152.124/3210.78.152.124 – 10.78.152.12410.78.152.124
6210.78.152.125/3210.78.152.125 – 10.78.152.12510.78.152.125
6310.78.152.126/3210.78.152.126 – 10.78.152.12610.78.152.126
6410.78.152.127/3210.78.152.127 – 10.78.152.12710.78.152.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →