ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.152.0/23
network10.78.152.0/23
broadcast10.78.153.255
first host10.78.152.1
last host10.78.153.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.78.152.0/23
address00001010.01001110.10011000.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.01001110.10011000.00000000
broadcast00001010.01001110.10011001.11111111
green = network part, grey = host part
hex0x0a4e9800
decimal172922880
reverse dns0.152.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:9800

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.152.0/2910.78.152.1 – 10.78.152.610.78.152.7
210.78.152.8/2910.78.152.9 – 10.78.152.1410.78.152.15
310.78.152.16/2910.78.152.17 – 10.78.152.2210.78.152.23
410.78.152.24/2910.78.152.25 – 10.78.152.3010.78.152.31
510.78.152.32/2910.78.152.33 – 10.78.152.3810.78.152.39
610.78.152.40/2910.78.152.41 – 10.78.152.4610.78.152.47
710.78.152.48/2910.78.152.49 – 10.78.152.5410.78.152.55
810.78.152.56/2910.78.152.57 – 10.78.152.6210.78.152.63
910.78.152.64/2910.78.152.65 – 10.78.152.7010.78.152.71
1010.78.152.72/2910.78.152.73 – 10.78.152.7810.78.152.79
1110.78.152.80/2910.78.152.81 – 10.78.152.8610.78.152.87
1210.78.152.88/2910.78.152.89 – 10.78.152.9410.78.152.95
1310.78.152.96/2910.78.152.97 – 10.78.152.10210.78.152.103
1410.78.152.104/2910.78.152.105 – 10.78.152.11010.78.152.111
1510.78.152.112/2910.78.152.113 – 10.78.152.11810.78.152.119
1610.78.152.120/2910.78.152.121 – 10.78.152.12610.78.152.127
1710.78.152.128/2910.78.152.129 – 10.78.152.13410.78.152.135
1810.78.152.136/2910.78.152.137 – 10.78.152.14210.78.152.143
1910.78.152.144/2910.78.152.145 – 10.78.152.15010.78.152.151
2010.78.152.152/2910.78.152.153 – 10.78.152.15810.78.152.159
2110.78.152.160/2910.78.152.161 – 10.78.152.16610.78.152.167
2210.78.152.168/2910.78.152.169 – 10.78.152.17410.78.152.175
2310.78.152.176/2910.78.152.177 – 10.78.152.18210.78.152.183
2410.78.152.184/2910.78.152.185 – 10.78.152.19010.78.152.191
2510.78.152.192/2910.78.152.193 – 10.78.152.19810.78.152.199
2610.78.152.200/2910.78.152.201 – 10.78.152.20610.78.152.207
2710.78.152.208/2910.78.152.209 – 10.78.152.21410.78.152.215
2810.78.152.216/2910.78.152.217 – 10.78.152.22210.78.152.223
2910.78.152.224/2910.78.152.225 – 10.78.152.23010.78.152.231
3010.78.152.232/2910.78.152.233 – 10.78.152.23810.78.152.239
3110.78.152.240/2910.78.152.241 – 10.78.152.24610.78.152.247
3210.78.152.248/2910.78.152.249 – 10.78.152.25410.78.152.255
3310.78.153.0/2910.78.153.1 – 10.78.153.610.78.153.7
3410.78.153.8/2910.78.153.9 – 10.78.153.1410.78.153.15
3510.78.153.16/2910.78.153.17 – 10.78.153.2210.78.153.23
3610.78.153.24/2910.78.153.25 – 10.78.153.3010.78.153.31
3710.78.153.32/2910.78.153.33 – 10.78.153.3810.78.153.39
3810.78.153.40/2910.78.153.41 – 10.78.153.4610.78.153.47
3910.78.153.48/2910.78.153.49 – 10.78.153.5410.78.153.55
4010.78.153.56/2910.78.153.57 – 10.78.153.6210.78.153.63
4110.78.153.64/2910.78.153.65 – 10.78.153.7010.78.153.71
4210.78.153.72/2910.78.153.73 – 10.78.153.7810.78.153.79
4310.78.153.80/2910.78.153.81 – 10.78.153.8610.78.153.87
4410.78.153.88/2910.78.153.89 – 10.78.153.9410.78.153.95
4510.78.153.96/2910.78.153.97 – 10.78.153.10210.78.153.103
4610.78.153.104/2910.78.153.105 – 10.78.153.11010.78.153.111
4710.78.153.112/2910.78.153.113 – 10.78.153.11810.78.153.119
4810.78.153.120/2910.78.153.121 – 10.78.153.12610.78.153.127
4910.78.153.128/2910.78.153.129 – 10.78.153.13410.78.153.135
5010.78.153.136/2910.78.153.137 – 10.78.153.14210.78.153.143
5110.78.153.144/2910.78.153.145 – 10.78.153.15010.78.153.151
5210.78.153.152/2910.78.153.153 – 10.78.153.15810.78.153.159
5310.78.153.160/2910.78.153.161 – 10.78.153.16610.78.153.167
5410.78.153.168/2910.78.153.169 – 10.78.153.17410.78.153.175
5510.78.153.176/2910.78.153.177 – 10.78.153.18210.78.153.183
5610.78.153.184/2910.78.153.185 – 10.78.153.19010.78.153.191
5710.78.153.192/2910.78.153.193 – 10.78.153.19810.78.153.199
5810.78.153.200/2910.78.153.201 – 10.78.153.20610.78.153.207
5910.78.153.208/2910.78.153.209 – 10.78.153.21410.78.153.215
6010.78.153.216/2910.78.153.217 – 10.78.153.22210.78.153.223
6110.78.153.224/2910.78.153.225 – 10.78.153.23010.78.153.231
6210.78.153.232/2910.78.153.233 – 10.78.153.23810.78.153.239
6310.78.153.240/2910.78.153.241 – 10.78.153.24610.78.153.247
6410.78.153.248/2910.78.153.249 – 10.78.153.25410.78.153.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →