ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.78.136.192/26
network10.78.136.192/26
broadcast10.78.136.255
first host10.78.136.193
last host10.78.136.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.136.192/26
address00001010.01001110.10001000.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.10001000.11000000
broadcast00001010.01001110.10001000.11111111
green = network part, grey = host part
hex0x0a4e88c0
decimal172918976
reverse dns192.136.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:88c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.136.192/3210.78.136.192 – 10.78.136.19210.78.136.192
210.78.136.193/3210.78.136.193 – 10.78.136.19310.78.136.193
310.78.136.194/3210.78.136.194 – 10.78.136.19410.78.136.194
410.78.136.195/3210.78.136.195 – 10.78.136.19510.78.136.195
510.78.136.196/3210.78.136.196 – 10.78.136.19610.78.136.196
610.78.136.197/3210.78.136.197 – 10.78.136.19710.78.136.197
710.78.136.198/3210.78.136.198 – 10.78.136.19810.78.136.198
810.78.136.199/3210.78.136.199 – 10.78.136.19910.78.136.199
910.78.136.200/3210.78.136.200 – 10.78.136.20010.78.136.200
1010.78.136.201/3210.78.136.201 – 10.78.136.20110.78.136.201
1110.78.136.202/3210.78.136.202 – 10.78.136.20210.78.136.202
1210.78.136.203/3210.78.136.203 – 10.78.136.20310.78.136.203
1310.78.136.204/3210.78.136.204 – 10.78.136.20410.78.136.204
1410.78.136.205/3210.78.136.205 – 10.78.136.20510.78.136.205
1510.78.136.206/3210.78.136.206 – 10.78.136.20610.78.136.206
1610.78.136.207/3210.78.136.207 – 10.78.136.20710.78.136.207
1710.78.136.208/3210.78.136.208 – 10.78.136.20810.78.136.208
1810.78.136.209/3210.78.136.209 – 10.78.136.20910.78.136.209
1910.78.136.210/3210.78.136.210 – 10.78.136.21010.78.136.210
2010.78.136.211/3210.78.136.211 – 10.78.136.21110.78.136.211
2110.78.136.212/3210.78.136.212 – 10.78.136.21210.78.136.212
2210.78.136.213/3210.78.136.213 – 10.78.136.21310.78.136.213
2310.78.136.214/3210.78.136.214 – 10.78.136.21410.78.136.214
2410.78.136.215/3210.78.136.215 – 10.78.136.21510.78.136.215
2510.78.136.216/3210.78.136.216 – 10.78.136.21610.78.136.216
2610.78.136.217/3210.78.136.217 – 10.78.136.21710.78.136.217
2710.78.136.218/3210.78.136.218 – 10.78.136.21810.78.136.218
2810.78.136.219/3210.78.136.219 – 10.78.136.21910.78.136.219
2910.78.136.220/3210.78.136.220 – 10.78.136.22010.78.136.220
3010.78.136.221/3210.78.136.221 – 10.78.136.22110.78.136.221
3110.78.136.222/3210.78.136.222 – 10.78.136.22210.78.136.222
3210.78.136.223/3210.78.136.223 – 10.78.136.22310.78.136.223
3310.78.136.224/3210.78.136.224 – 10.78.136.22410.78.136.224
3410.78.136.225/3210.78.136.225 – 10.78.136.22510.78.136.225
3510.78.136.226/3210.78.136.226 – 10.78.136.22610.78.136.226
3610.78.136.227/3210.78.136.227 – 10.78.136.22710.78.136.227
3710.78.136.228/3210.78.136.228 – 10.78.136.22810.78.136.228
3810.78.136.229/3210.78.136.229 – 10.78.136.22910.78.136.229
3910.78.136.230/3210.78.136.230 – 10.78.136.23010.78.136.230
4010.78.136.231/3210.78.136.231 – 10.78.136.23110.78.136.231
4110.78.136.232/3210.78.136.232 – 10.78.136.23210.78.136.232
4210.78.136.233/3210.78.136.233 – 10.78.136.23310.78.136.233
4310.78.136.234/3210.78.136.234 – 10.78.136.23410.78.136.234
4410.78.136.235/3210.78.136.235 – 10.78.136.23510.78.136.235
4510.78.136.236/3210.78.136.236 – 10.78.136.23610.78.136.236
4610.78.136.237/3210.78.136.237 – 10.78.136.23710.78.136.237
4710.78.136.238/3210.78.136.238 – 10.78.136.23810.78.136.238
4810.78.136.239/3210.78.136.239 – 10.78.136.23910.78.136.239
4910.78.136.240/3210.78.136.240 – 10.78.136.24010.78.136.240
5010.78.136.241/3210.78.136.241 – 10.78.136.24110.78.136.241
5110.78.136.242/3210.78.136.242 – 10.78.136.24210.78.136.242
5210.78.136.243/3210.78.136.243 – 10.78.136.24310.78.136.243
5310.78.136.244/3210.78.136.244 – 10.78.136.24410.78.136.244
5410.78.136.245/3210.78.136.245 – 10.78.136.24510.78.136.245
5510.78.136.246/3210.78.136.246 – 10.78.136.24610.78.136.246
5610.78.136.247/3210.78.136.247 – 10.78.136.24710.78.136.247
5710.78.136.248/3210.78.136.248 – 10.78.136.24810.78.136.248
5810.78.136.249/3210.78.136.249 – 10.78.136.24910.78.136.249
5910.78.136.250/3210.78.136.250 – 10.78.136.25010.78.136.250
6010.78.136.251/3210.78.136.251 – 10.78.136.25110.78.136.251
6110.78.136.252/3210.78.136.252 – 10.78.136.25210.78.136.252
6210.78.136.253/3210.78.136.253 – 10.78.136.25310.78.136.253
6310.78.136.254/3210.78.136.254 – 10.78.136.25410.78.136.254
6410.78.136.255/3210.78.136.255 – 10.78.136.25510.78.136.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →