ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.78.136.128/26
network10.78.136.128/26
broadcast10.78.136.191
first host10.78.136.129
last host10.78.136.190
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.78.136.128/26
address00001010.01001110.10001000.10000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001110.10001000.10000000
broadcast00001010.01001110.10001000.10111111
green = network part, grey = host part
hex0x0a4e8880
decimal172918912
reverse dns128.136.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:8880

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.136.128/3210.78.136.128 – 10.78.136.12810.78.136.128
210.78.136.129/3210.78.136.129 – 10.78.136.12910.78.136.129
310.78.136.130/3210.78.136.130 – 10.78.136.13010.78.136.130
410.78.136.131/3210.78.136.131 – 10.78.136.13110.78.136.131
510.78.136.132/3210.78.136.132 – 10.78.136.13210.78.136.132
610.78.136.133/3210.78.136.133 – 10.78.136.13310.78.136.133
710.78.136.134/3210.78.136.134 – 10.78.136.13410.78.136.134
810.78.136.135/3210.78.136.135 – 10.78.136.13510.78.136.135
910.78.136.136/3210.78.136.136 – 10.78.136.13610.78.136.136
1010.78.136.137/3210.78.136.137 – 10.78.136.13710.78.136.137
1110.78.136.138/3210.78.136.138 – 10.78.136.13810.78.136.138
1210.78.136.139/3210.78.136.139 – 10.78.136.13910.78.136.139
1310.78.136.140/3210.78.136.140 – 10.78.136.14010.78.136.140
1410.78.136.141/3210.78.136.141 – 10.78.136.14110.78.136.141
1510.78.136.142/3210.78.136.142 – 10.78.136.14210.78.136.142
1610.78.136.143/3210.78.136.143 – 10.78.136.14310.78.136.143
1710.78.136.144/3210.78.136.144 – 10.78.136.14410.78.136.144
1810.78.136.145/3210.78.136.145 – 10.78.136.14510.78.136.145
1910.78.136.146/3210.78.136.146 – 10.78.136.14610.78.136.146
2010.78.136.147/3210.78.136.147 – 10.78.136.14710.78.136.147
2110.78.136.148/3210.78.136.148 – 10.78.136.14810.78.136.148
2210.78.136.149/3210.78.136.149 – 10.78.136.14910.78.136.149
2310.78.136.150/3210.78.136.150 – 10.78.136.15010.78.136.150
2410.78.136.151/3210.78.136.151 – 10.78.136.15110.78.136.151
2510.78.136.152/3210.78.136.152 – 10.78.136.15210.78.136.152
2610.78.136.153/3210.78.136.153 – 10.78.136.15310.78.136.153
2710.78.136.154/3210.78.136.154 – 10.78.136.15410.78.136.154
2810.78.136.155/3210.78.136.155 – 10.78.136.15510.78.136.155
2910.78.136.156/3210.78.136.156 – 10.78.136.15610.78.136.156
3010.78.136.157/3210.78.136.157 – 10.78.136.15710.78.136.157
3110.78.136.158/3210.78.136.158 – 10.78.136.15810.78.136.158
3210.78.136.159/3210.78.136.159 – 10.78.136.15910.78.136.159
3310.78.136.160/3210.78.136.160 – 10.78.136.16010.78.136.160
3410.78.136.161/3210.78.136.161 – 10.78.136.16110.78.136.161
3510.78.136.162/3210.78.136.162 – 10.78.136.16210.78.136.162
3610.78.136.163/3210.78.136.163 – 10.78.136.16310.78.136.163
3710.78.136.164/3210.78.136.164 – 10.78.136.16410.78.136.164
3810.78.136.165/3210.78.136.165 – 10.78.136.16510.78.136.165
3910.78.136.166/3210.78.136.166 – 10.78.136.16610.78.136.166
4010.78.136.167/3210.78.136.167 – 10.78.136.16710.78.136.167
4110.78.136.168/3210.78.136.168 – 10.78.136.16810.78.136.168
4210.78.136.169/3210.78.136.169 – 10.78.136.16910.78.136.169
4310.78.136.170/3210.78.136.170 – 10.78.136.17010.78.136.170
4410.78.136.171/3210.78.136.171 – 10.78.136.17110.78.136.171
4510.78.136.172/3210.78.136.172 – 10.78.136.17210.78.136.172
4610.78.136.173/3210.78.136.173 – 10.78.136.17310.78.136.173
4710.78.136.174/3210.78.136.174 – 10.78.136.17410.78.136.174
4810.78.136.175/3210.78.136.175 – 10.78.136.17510.78.136.175
4910.78.136.176/3210.78.136.176 – 10.78.136.17610.78.136.176
5010.78.136.177/3210.78.136.177 – 10.78.136.17710.78.136.177
5110.78.136.178/3210.78.136.178 – 10.78.136.17810.78.136.178
5210.78.136.179/3210.78.136.179 – 10.78.136.17910.78.136.179
5310.78.136.180/3210.78.136.180 – 10.78.136.18010.78.136.180
5410.78.136.181/3210.78.136.181 – 10.78.136.18110.78.136.181
5510.78.136.182/3210.78.136.182 – 10.78.136.18210.78.136.182
5610.78.136.183/3210.78.136.183 – 10.78.136.18310.78.136.183
5710.78.136.184/3210.78.136.184 – 10.78.136.18410.78.136.184
5810.78.136.185/3210.78.136.185 – 10.78.136.18510.78.136.185
5910.78.136.186/3210.78.136.186 – 10.78.136.18610.78.136.186
6010.78.136.187/3210.78.136.187 – 10.78.136.18710.78.136.187
6110.78.136.188/3210.78.136.188 – 10.78.136.18810.78.136.188
6210.78.136.189/3210.78.136.189 – 10.78.136.18910.78.136.189
6310.78.136.190/3210.78.136.190 – 10.78.136.19010.78.136.190
6410.78.136.191/3210.78.136.191 – 10.78.136.19110.78.136.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →