ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.78.134.0/24
network10.78.134.0/24
broadcast10.78.134.255
first host10.78.134.1
last host10.78.134.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.78.134.0/24
address00001010.01001110.10000110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001110.10000110.00000000
broadcast00001010.01001110.10000110.11111111
green = network part, grey = host part
hex0x0a4e8600
decimal172918272
reverse dns0.134.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:8600

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.134.0/3010.78.134.1 – 10.78.134.210.78.134.3
210.78.134.4/3010.78.134.5 – 10.78.134.610.78.134.7
310.78.134.8/3010.78.134.9 – 10.78.134.1010.78.134.11
410.78.134.12/3010.78.134.13 – 10.78.134.1410.78.134.15
510.78.134.16/3010.78.134.17 – 10.78.134.1810.78.134.19
610.78.134.20/3010.78.134.21 – 10.78.134.2210.78.134.23
710.78.134.24/3010.78.134.25 – 10.78.134.2610.78.134.27
810.78.134.28/3010.78.134.29 – 10.78.134.3010.78.134.31
910.78.134.32/3010.78.134.33 – 10.78.134.3410.78.134.35
1010.78.134.36/3010.78.134.37 – 10.78.134.3810.78.134.39
1110.78.134.40/3010.78.134.41 – 10.78.134.4210.78.134.43
1210.78.134.44/3010.78.134.45 – 10.78.134.4610.78.134.47
1310.78.134.48/3010.78.134.49 – 10.78.134.5010.78.134.51
1410.78.134.52/3010.78.134.53 – 10.78.134.5410.78.134.55
1510.78.134.56/3010.78.134.57 – 10.78.134.5810.78.134.59
1610.78.134.60/3010.78.134.61 – 10.78.134.6210.78.134.63
1710.78.134.64/3010.78.134.65 – 10.78.134.6610.78.134.67
1810.78.134.68/3010.78.134.69 – 10.78.134.7010.78.134.71
1910.78.134.72/3010.78.134.73 – 10.78.134.7410.78.134.75
2010.78.134.76/3010.78.134.77 – 10.78.134.7810.78.134.79
2110.78.134.80/3010.78.134.81 – 10.78.134.8210.78.134.83
2210.78.134.84/3010.78.134.85 – 10.78.134.8610.78.134.87
2310.78.134.88/3010.78.134.89 – 10.78.134.9010.78.134.91
2410.78.134.92/3010.78.134.93 – 10.78.134.9410.78.134.95
2510.78.134.96/3010.78.134.97 – 10.78.134.9810.78.134.99
2610.78.134.100/3010.78.134.101 – 10.78.134.10210.78.134.103
2710.78.134.104/3010.78.134.105 – 10.78.134.10610.78.134.107
2810.78.134.108/3010.78.134.109 – 10.78.134.11010.78.134.111
2910.78.134.112/3010.78.134.113 – 10.78.134.11410.78.134.115
3010.78.134.116/3010.78.134.117 – 10.78.134.11810.78.134.119
3110.78.134.120/3010.78.134.121 – 10.78.134.12210.78.134.123
3210.78.134.124/3010.78.134.125 – 10.78.134.12610.78.134.127
3310.78.134.128/3010.78.134.129 – 10.78.134.13010.78.134.131
3410.78.134.132/3010.78.134.133 – 10.78.134.13410.78.134.135
3510.78.134.136/3010.78.134.137 – 10.78.134.13810.78.134.139
3610.78.134.140/3010.78.134.141 – 10.78.134.14210.78.134.143
3710.78.134.144/3010.78.134.145 – 10.78.134.14610.78.134.147
3810.78.134.148/3010.78.134.149 – 10.78.134.15010.78.134.151
3910.78.134.152/3010.78.134.153 – 10.78.134.15410.78.134.155
4010.78.134.156/3010.78.134.157 – 10.78.134.15810.78.134.159
4110.78.134.160/3010.78.134.161 – 10.78.134.16210.78.134.163
4210.78.134.164/3010.78.134.165 – 10.78.134.16610.78.134.167
4310.78.134.168/3010.78.134.169 – 10.78.134.17010.78.134.171
4410.78.134.172/3010.78.134.173 – 10.78.134.17410.78.134.175
4510.78.134.176/3010.78.134.177 – 10.78.134.17810.78.134.179
4610.78.134.180/3010.78.134.181 – 10.78.134.18210.78.134.183
4710.78.134.184/3010.78.134.185 – 10.78.134.18610.78.134.187
4810.78.134.188/3010.78.134.189 – 10.78.134.19010.78.134.191
4910.78.134.192/3010.78.134.193 – 10.78.134.19410.78.134.195
5010.78.134.196/3010.78.134.197 – 10.78.134.19810.78.134.199
5110.78.134.200/3010.78.134.201 – 10.78.134.20210.78.134.203
5210.78.134.204/3010.78.134.205 – 10.78.134.20610.78.134.207
5310.78.134.208/3010.78.134.209 – 10.78.134.21010.78.134.211
5410.78.134.212/3010.78.134.213 – 10.78.134.21410.78.134.215
5510.78.134.216/3010.78.134.217 – 10.78.134.21810.78.134.219
5610.78.134.220/3010.78.134.221 – 10.78.134.22210.78.134.223
5710.78.134.224/3010.78.134.225 – 10.78.134.22610.78.134.227
5810.78.134.228/3010.78.134.229 – 10.78.134.23010.78.134.231
5910.78.134.232/3010.78.134.233 – 10.78.134.23410.78.134.235
6010.78.134.236/3010.78.134.237 – 10.78.134.23810.78.134.239
6110.78.134.240/3010.78.134.241 – 10.78.134.24210.78.134.243
6210.78.134.244/3010.78.134.245 – 10.78.134.24610.78.134.247
6310.78.134.248/3010.78.134.249 – 10.78.134.25010.78.134.251
6410.78.134.252/3010.78.134.253 – 10.78.134.25410.78.134.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →