ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.128.0/18
network10.78.128.0/18
broadcast10.78.191.255
first host10.78.128.1
last host10.78.191.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.78.128.0/18
address00001010.01001110.10000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.01001110.10000000.00000000
broadcast00001010.01001110.10111111.11111111
green = network part, grey = host part
hex0x0a4e8000
decimal172916736
reverse dns0.128.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:8000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.128.0/2410.78.128.1 – 10.78.128.25410.78.128.255
210.78.129.0/2410.78.129.1 – 10.78.129.25410.78.129.255
310.78.130.0/2410.78.130.1 – 10.78.130.25410.78.130.255
410.78.131.0/2410.78.131.1 – 10.78.131.25410.78.131.255
510.78.132.0/2410.78.132.1 – 10.78.132.25410.78.132.255
610.78.133.0/2410.78.133.1 – 10.78.133.25410.78.133.255
710.78.134.0/2410.78.134.1 – 10.78.134.25410.78.134.255
810.78.135.0/2410.78.135.1 – 10.78.135.25410.78.135.255
910.78.136.0/2410.78.136.1 – 10.78.136.25410.78.136.255
1010.78.137.0/2410.78.137.1 – 10.78.137.25410.78.137.255
1110.78.138.0/2410.78.138.1 – 10.78.138.25410.78.138.255
1210.78.139.0/2410.78.139.1 – 10.78.139.25410.78.139.255
1310.78.140.0/2410.78.140.1 – 10.78.140.25410.78.140.255
1410.78.141.0/2410.78.141.1 – 10.78.141.25410.78.141.255
1510.78.142.0/2410.78.142.1 – 10.78.142.25410.78.142.255
1610.78.143.0/2410.78.143.1 – 10.78.143.25410.78.143.255
1710.78.144.0/2410.78.144.1 – 10.78.144.25410.78.144.255
1810.78.145.0/2410.78.145.1 – 10.78.145.25410.78.145.255
1910.78.146.0/2410.78.146.1 – 10.78.146.25410.78.146.255
2010.78.147.0/2410.78.147.1 – 10.78.147.25410.78.147.255
2110.78.148.0/2410.78.148.1 – 10.78.148.25410.78.148.255
2210.78.149.0/2410.78.149.1 – 10.78.149.25410.78.149.255
2310.78.150.0/2410.78.150.1 – 10.78.150.25410.78.150.255
2410.78.151.0/2410.78.151.1 – 10.78.151.25410.78.151.255
2510.78.152.0/2410.78.152.1 – 10.78.152.25410.78.152.255
2610.78.153.0/2410.78.153.1 – 10.78.153.25410.78.153.255
2710.78.154.0/2410.78.154.1 – 10.78.154.25410.78.154.255
2810.78.155.0/2410.78.155.1 – 10.78.155.25410.78.155.255
2910.78.156.0/2410.78.156.1 – 10.78.156.25410.78.156.255
3010.78.157.0/2410.78.157.1 – 10.78.157.25410.78.157.255
3110.78.158.0/2410.78.158.1 – 10.78.158.25410.78.158.255
3210.78.159.0/2410.78.159.1 – 10.78.159.25410.78.159.255
3310.78.160.0/2410.78.160.1 – 10.78.160.25410.78.160.255
3410.78.161.0/2410.78.161.1 – 10.78.161.25410.78.161.255
3510.78.162.0/2410.78.162.1 – 10.78.162.25410.78.162.255
3610.78.163.0/2410.78.163.1 – 10.78.163.25410.78.163.255
3710.78.164.0/2410.78.164.1 – 10.78.164.25410.78.164.255
3810.78.165.0/2410.78.165.1 – 10.78.165.25410.78.165.255
3910.78.166.0/2410.78.166.1 – 10.78.166.25410.78.166.255
4010.78.167.0/2410.78.167.1 – 10.78.167.25410.78.167.255
4110.78.168.0/2410.78.168.1 – 10.78.168.25410.78.168.255
4210.78.169.0/2410.78.169.1 – 10.78.169.25410.78.169.255
4310.78.170.0/2410.78.170.1 – 10.78.170.25410.78.170.255
4410.78.171.0/2410.78.171.1 – 10.78.171.25410.78.171.255
4510.78.172.0/2410.78.172.1 – 10.78.172.25410.78.172.255
4610.78.173.0/2410.78.173.1 – 10.78.173.25410.78.173.255
4710.78.174.0/2410.78.174.1 – 10.78.174.25410.78.174.255
4810.78.175.0/2410.78.175.1 – 10.78.175.25410.78.175.255
4910.78.176.0/2410.78.176.1 – 10.78.176.25410.78.176.255
5010.78.177.0/2410.78.177.1 – 10.78.177.25410.78.177.255
5110.78.178.0/2410.78.178.1 – 10.78.178.25410.78.178.255
5210.78.179.0/2410.78.179.1 – 10.78.179.25410.78.179.255
5310.78.180.0/2410.78.180.1 – 10.78.180.25410.78.180.255
5410.78.181.0/2410.78.181.1 – 10.78.181.25410.78.181.255
5510.78.182.0/2410.78.182.1 – 10.78.182.25410.78.182.255
5610.78.183.0/2410.78.183.1 – 10.78.183.25410.78.183.255
5710.78.184.0/2410.78.184.1 – 10.78.184.25410.78.184.255
5810.78.185.0/2410.78.185.1 – 10.78.185.25410.78.185.255
5910.78.186.0/2410.78.186.1 – 10.78.186.25410.78.186.255
6010.78.187.0/2410.78.187.1 – 10.78.187.25410.78.187.255
6110.78.188.0/2410.78.188.1 – 10.78.188.25410.78.188.255
6210.78.189.0/2410.78.189.1 – 10.78.189.25410.78.189.255
6310.78.190.0/2410.78.190.1 – 10.78.190.25410.78.190.255
6410.78.191.0/2410.78.191.1 – 10.78.191.25410.78.191.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →