ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.78.115.0/24
network10.78.115.0/24
broadcast10.78.115.255
first host10.78.115.1
last host10.78.115.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.78.115.0/24
address00001010.01001110.01110011.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001110.01110011.00000000
broadcast00001010.01001110.01110011.11111111
green = network part, grey = host part
hex0x0a4e7300
decimal172913408
reverse dns0.115.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:7300

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.115.0/3010.78.115.1 – 10.78.115.210.78.115.3
210.78.115.4/3010.78.115.5 – 10.78.115.610.78.115.7
310.78.115.8/3010.78.115.9 – 10.78.115.1010.78.115.11
410.78.115.12/3010.78.115.13 – 10.78.115.1410.78.115.15
510.78.115.16/3010.78.115.17 – 10.78.115.1810.78.115.19
610.78.115.20/3010.78.115.21 – 10.78.115.2210.78.115.23
710.78.115.24/3010.78.115.25 – 10.78.115.2610.78.115.27
810.78.115.28/3010.78.115.29 – 10.78.115.3010.78.115.31
910.78.115.32/3010.78.115.33 – 10.78.115.3410.78.115.35
1010.78.115.36/3010.78.115.37 – 10.78.115.3810.78.115.39
1110.78.115.40/3010.78.115.41 – 10.78.115.4210.78.115.43
1210.78.115.44/3010.78.115.45 – 10.78.115.4610.78.115.47
1310.78.115.48/3010.78.115.49 – 10.78.115.5010.78.115.51
1410.78.115.52/3010.78.115.53 – 10.78.115.5410.78.115.55
1510.78.115.56/3010.78.115.57 – 10.78.115.5810.78.115.59
1610.78.115.60/3010.78.115.61 – 10.78.115.6210.78.115.63
1710.78.115.64/3010.78.115.65 – 10.78.115.6610.78.115.67
1810.78.115.68/3010.78.115.69 – 10.78.115.7010.78.115.71
1910.78.115.72/3010.78.115.73 – 10.78.115.7410.78.115.75
2010.78.115.76/3010.78.115.77 – 10.78.115.7810.78.115.79
2110.78.115.80/3010.78.115.81 – 10.78.115.8210.78.115.83
2210.78.115.84/3010.78.115.85 – 10.78.115.8610.78.115.87
2310.78.115.88/3010.78.115.89 – 10.78.115.9010.78.115.91
2410.78.115.92/3010.78.115.93 – 10.78.115.9410.78.115.95
2510.78.115.96/3010.78.115.97 – 10.78.115.9810.78.115.99
2610.78.115.100/3010.78.115.101 – 10.78.115.10210.78.115.103
2710.78.115.104/3010.78.115.105 – 10.78.115.10610.78.115.107
2810.78.115.108/3010.78.115.109 – 10.78.115.11010.78.115.111
2910.78.115.112/3010.78.115.113 – 10.78.115.11410.78.115.115
3010.78.115.116/3010.78.115.117 – 10.78.115.11810.78.115.119
3110.78.115.120/3010.78.115.121 – 10.78.115.12210.78.115.123
3210.78.115.124/3010.78.115.125 – 10.78.115.12610.78.115.127
3310.78.115.128/3010.78.115.129 – 10.78.115.13010.78.115.131
3410.78.115.132/3010.78.115.133 – 10.78.115.13410.78.115.135
3510.78.115.136/3010.78.115.137 – 10.78.115.13810.78.115.139
3610.78.115.140/3010.78.115.141 – 10.78.115.14210.78.115.143
3710.78.115.144/3010.78.115.145 – 10.78.115.14610.78.115.147
3810.78.115.148/3010.78.115.149 – 10.78.115.15010.78.115.151
3910.78.115.152/3010.78.115.153 – 10.78.115.15410.78.115.155
4010.78.115.156/3010.78.115.157 – 10.78.115.15810.78.115.159
4110.78.115.160/3010.78.115.161 – 10.78.115.16210.78.115.163
4210.78.115.164/3010.78.115.165 – 10.78.115.16610.78.115.167
4310.78.115.168/3010.78.115.169 – 10.78.115.17010.78.115.171
4410.78.115.172/3010.78.115.173 – 10.78.115.17410.78.115.175
4510.78.115.176/3010.78.115.177 – 10.78.115.17810.78.115.179
4610.78.115.180/3010.78.115.181 – 10.78.115.18210.78.115.183
4710.78.115.184/3010.78.115.185 – 10.78.115.18610.78.115.187
4810.78.115.188/3010.78.115.189 – 10.78.115.19010.78.115.191
4910.78.115.192/3010.78.115.193 – 10.78.115.19410.78.115.195
5010.78.115.196/3010.78.115.197 – 10.78.115.19810.78.115.199
5110.78.115.200/3010.78.115.201 – 10.78.115.20210.78.115.203
5210.78.115.204/3010.78.115.205 – 10.78.115.20610.78.115.207
5310.78.115.208/3010.78.115.209 – 10.78.115.21010.78.115.211
5410.78.115.212/3010.78.115.213 – 10.78.115.21410.78.115.215
5510.78.115.216/3010.78.115.217 – 10.78.115.21810.78.115.219
5610.78.115.220/3010.78.115.221 – 10.78.115.22210.78.115.223
5710.78.115.224/3010.78.115.225 – 10.78.115.22610.78.115.227
5810.78.115.228/3010.78.115.229 – 10.78.115.23010.78.115.231
5910.78.115.232/3010.78.115.233 – 10.78.115.23410.78.115.235
6010.78.115.236/3010.78.115.237 – 10.78.115.23810.78.115.239
6110.78.115.240/3010.78.115.241 – 10.78.115.24210.78.115.243
6210.78.115.244/3010.78.115.245 – 10.78.115.24610.78.115.247
6310.78.115.248/3010.78.115.249 – 10.78.115.25010.78.115.251
6410.78.115.252/3010.78.115.253 – 10.78.115.25410.78.115.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →