ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.78.110.0/23
network10.78.110.0/23
broadcast10.78.111.255
first host10.78.110.1
last host10.78.111.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.78.110.0/23
address00001010.01001110.01101110.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.01001110.01101110.00000000
broadcast00001010.01001110.01101111.11111111
green = network part, grey = host part
hex0x0a4e6e00
decimal172912128
reverse dns0.110.78.10.in-addr.arpa
ipv4-mapped::ffff:a4e:6e00

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.78.110.0/2910.78.110.1 – 10.78.110.610.78.110.7
210.78.110.8/2910.78.110.9 – 10.78.110.1410.78.110.15
310.78.110.16/2910.78.110.17 – 10.78.110.2210.78.110.23
410.78.110.24/2910.78.110.25 – 10.78.110.3010.78.110.31
510.78.110.32/2910.78.110.33 – 10.78.110.3810.78.110.39
610.78.110.40/2910.78.110.41 – 10.78.110.4610.78.110.47
710.78.110.48/2910.78.110.49 – 10.78.110.5410.78.110.55
810.78.110.56/2910.78.110.57 – 10.78.110.6210.78.110.63
910.78.110.64/2910.78.110.65 – 10.78.110.7010.78.110.71
1010.78.110.72/2910.78.110.73 – 10.78.110.7810.78.110.79
1110.78.110.80/2910.78.110.81 – 10.78.110.8610.78.110.87
1210.78.110.88/2910.78.110.89 – 10.78.110.9410.78.110.95
1310.78.110.96/2910.78.110.97 – 10.78.110.10210.78.110.103
1410.78.110.104/2910.78.110.105 – 10.78.110.11010.78.110.111
1510.78.110.112/2910.78.110.113 – 10.78.110.11810.78.110.119
1610.78.110.120/2910.78.110.121 – 10.78.110.12610.78.110.127
1710.78.110.128/2910.78.110.129 – 10.78.110.13410.78.110.135
1810.78.110.136/2910.78.110.137 – 10.78.110.14210.78.110.143
1910.78.110.144/2910.78.110.145 – 10.78.110.15010.78.110.151
2010.78.110.152/2910.78.110.153 – 10.78.110.15810.78.110.159
2110.78.110.160/2910.78.110.161 – 10.78.110.16610.78.110.167
2210.78.110.168/2910.78.110.169 – 10.78.110.17410.78.110.175
2310.78.110.176/2910.78.110.177 – 10.78.110.18210.78.110.183
2410.78.110.184/2910.78.110.185 – 10.78.110.19010.78.110.191
2510.78.110.192/2910.78.110.193 – 10.78.110.19810.78.110.199
2610.78.110.200/2910.78.110.201 – 10.78.110.20610.78.110.207
2710.78.110.208/2910.78.110.209 – 10.78.110.21410.78.110.215
2810.78.110.216/2910.78.110.217 – 10.78.110.22210.78.110.223
2910.78.110.224/2910.78.110.225 – 10.78.110.23010.78.110.231
3010.78.110.232/2910.78.110.233 – 10.78.110.23810.78.110.239
3110.78.110.240/2910.78.110.241 – 10.78.110.24610.78.110.247
3210.78.110.248/2910.78.110.249 – 10.78.110.25410.78.110.255
3310.78.111.0/2910.78.111.1 – 10.78.111.610.78.111.7
3410.78.111.8/2910.78.111.9 – 10.78.111.1410.78.111.15
3510.78.111.16/2910.78.111.17 – 10.78.111.2210.78.111.23
3610.78.111.24/2910.78.111.25 – 10.78.111.3010.78.111.31
3710.78.111.32/2910.78.111.33 – 10.78.111.3810.78.111.39
3810.78.111.40/2910.78.111.41 – 10.78.111.4610.78.111.47
3910.78.111.48/2910.78.111.49 – 10.78.111.5410.78.111.55
4010.78.111.56/2910.78.111.57 – 10.78.111.6210.78.111.63
4110.78.111.64/2910.78.111.65 – 10.78.111.7010.78.111.71
4210.78.111.72/2910.78.111.73 – 10.78.111.7810.78.111.79
4310.78.111.80/2910.78.111.81 – 10.78.111.8610.78.111.87
4410.78.111.88/2910.78.111.89 – 10.78.111.9410.78.111.95
4510.78.111.96/2910.78.111.97 – 10.78.111.10210.78.111.103
4610.78.111.104/2910.78.111.105 – 10.78.111.11010.78.111.111
4710.78.111.112/2910.78.111.113 – 10.78.111.11810.78.111.119
4810.78.111.120/2910.78.111.121 – 10.78.111.12610.78.111.127
4910.78.111.128/2910.78.111.129 – 10.78.111.13410.78.111.135
5010.78.111.136/2910.78.111.137 – 10.78.111.14210.78.111.143
5110.78.111.144/2910.78.111.145 – 10.78.111.15010.78.111.151
5210.78.111.152/2910.78.111.153 – 10.78.111.15810.78.111.159
5310.78.111.160/2910.78.111.161 – 10.78.111.16610.78.111.167
5410.78.111.168/2910.78.111.169 – 10.78.111.17410.78.111.175
5510.78.111.176/2910.78.111.177 – 10.78.111.18210.78.111.183
5610.78.111.184/2910.78.111.185 – 10.78.111.19010.78.111.191
5710.78.111.192/2910.78.111.193 – 10.78.111.19810.78.111.199
5810.78.111.200/2910.78.111.201 – 10.78.111.20610.78.111.207
5910.78.111.208/2910.78.111.209 – 10.78.111.21410.78.111.215
6010.78.111.216/2910.78.111.217 – 10.78.111.22210.78.111.223
6110.78.111.224/2910.78.111.225 – 10.78.111.23010.78.111.231
6210.78.111.232/2910.78.111.233 – 10.78.111.23810.78.111.239
6310.78.111.240/2910.78.111.241 – 10.78.111.24610.78.111.247
6410.78.111.248/2910.78.111.249 – 10.78.111.25410.78.111.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →