IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.76.9.0/24

network10.76.9.0/24

broadcast10.76.9.255

first host10.76.9.1

last host10.76.9.254

subnet mask255.255.255.0

wildcard0.0.0.255

addresses256

usable hosts254

classA

ipcalc 10.76.9.0/24

address00001010.01001100.00001001.00000000

subnet mask11111111.11111111.11111111.00000000

network00001010.01001100.00001001.00000000

broadcast00001010.01001100.00001001.11111111

green = network part, grey = host part

hex0x0a4c0900

decimal172755200

reverse dns0.9.76.10.in-addr.arpa

ipv4-mapped::ffff:a4c:900

/24 split into /30 · 64 subnets

close ×

#	network	host range	broadcast
1	10.76.9.0/30	10.76.9.1 – 10.76.9.2	10.76.9.3
2	10.76.9.4/30	10.76.9.5 – 10.76.9.6	10.76.9.7
3	10.76.9.8/30	10.76.9.9 – 10.76.9.10	10.76.9.11
4	10.76.9.12/30	10.76.9.13 – 10.76.9.14	10.76.9.15
5	10.76.9.16/30	10.76.9.17 – 10.76.9.18	10.76.9.19
6	10.76.9.20/30	10.76.9.21 – 10.76.9.22	10.76.9.23
7	10.76.9.24/30	10.76.9.25 – 10.76.9.26	10.76.9.27
8	10.76.9.28/30	10.76.9.29 – 10.76.9.30	10.76.9.31
9	10.76.9.32/30	10.76.9.33 – 10.76.9.34	10.76.9.35
10	10.76.9.36/30	10.76.9.37 – 10.76.9.38	10.76.9.39
11	10.76.9.40/30	10.76.9.41 – 10.76.9.42	10.76.9.43
12	10.76.9.44/30	10.76.9.45 – 10.76.9.46	10.76.9.47
13	10.76.9.48/30	10.76.9.49 – 10.76.9.50	10.76.9.51
14	10.76.9.52/30	10.76.9.53 – 10.76.9.54	10.76.9.55
15	10.76.9.56/30	10.76.9.57 – 10.76.9.58	10.76.9.59
16	10.76.9.60/30	10.76.9.61 – 10.76.9.62	10.76.9.63
17	10.76.9.64/30	10.76.9.65 – 10.76.9.66	10.76.9.67
18	10.76.9.68/30	10.76.9.69 – 10.76.9.70	10.76.9.71
19	10.76.9.72/30	10.76.9.73 – 10.76.9.74	10.76.9.75
20	10.76.9.76/30	10.76.9.77 – 10.76.9.78	10.76.9.79
21	10.76.9.80/30	10.76.9.81 – 10.76.9.82	10.76.9.83
22	10.76.9.84/30	10.76.9.85 – 10.76.9.86	10.76.9.87
23	10.76.9.88/30	10.76.9.89 – 10.76.9.90	10.76.9.91
24	10.76.9.92/30	10.76.9.93 – 10.76.9.94	10.76.9.95
25	10.76.9.96/30	10.76.9.97 – 10.76.9.98	10.76.9.99
26	10.76.9.100/30	10.76.9.101 – 10.76.9.102	10.76.9.103
27	10.76.9.104/30	10.76.9.105 – 10.76.9.106	10.76.9.107
28	10.76.9.108/30	10.76.9.109 – 10.76.9.110	10.76.9.111
29	10.76.9.112/30	10.76.9.113 – 10.76.9.114	10.76.9.115
30	10.76.9.116/30	10.76.9.117 – 10.76.9.118	10.76.9.119
31	10.76.9.120/30	10.76.9.121 – 10.76.9.122	10.76.9.123
32	10.76.9.124/30	10.76.9.125 – 10.76.9.126	10.76.9.127
33	10.76.9.128/30	10.76.9.129 – 10.76.9.130	10.76.9.131
34	10.76.9.132/30	10.76.9.133 – 10.76.9.134	10.76.9.135
35	10.76.9.136/30	10.76.9.137 – 10.76.9.138	10.76.9.139
36	10.76.9.140/30	10.76.9.141 – 10.76.9.142	10.76.9.143
37	10.76.9.144/30	10.76.9.145 – 10.76.9.146	10.76.9.147
38	10.76.9.148/30	10.76.9.149 – 10.76.9.150	10.76.9.151
39	10.76.9.152/30	10.76.9.153 – 10.76.9.154	10.76.9.155
40	10.76.9.156/30	10.76.9.157 – 10.76.9.158	10.76.9.159
41	10.76.9.160/30	10.76.9.161 – 10.76.9.162	10.76.9.163
42	10.76.9.164/30	10.76.9.165 – 10.76.9.166	10.76.9.167
43	10.76.9.168/30	10.76.9.169 – 10.76.9.170	10.76.9.171
44	10.76.9.172/30	10.76.9.173 – 10.76.9.174	10.76.9.175
45	10.76.9.176/30	10.76.9.177 – 10.76.9.178	10.76.9.179
46	10.76.9.180/30	10.76.9.181 – 10.76.9.182	10.76.9.183
47	10.76.9.184/30	10.76.9.185 – 10.76.9.186	10.76.9.187
48	10.76.9.188/30	10.76.9.189 – 10.76.9.190	10.76.9.191
49	10.76.9.192/30	10.76.9.193 – 10.76.9.194	10.76.9.195
50	10.76.9.196/30	10.76.9.197 – 10.76.9.198	10.76.9.199
51	10.76.9.200/30	10.76.9.201 – 10.76.9.202	10.76.9.203
52	10.76.9.204/30	10.76.9.205 – 10.76.9.206	10.76.9.207
53	10.76.9.208/30	10.76.9.209 – 10.76.9.210	10.76.9.211
54	10.76.9.212/30	10.76.9.213 – 10.76.9.214	10.76.9.215
55	10.76.9.216/30	10.76.9.217 – 10.76.9.218	10.76.9.219
56	10.76.9.220/30	10.76.9.221 – 10.76.9.222	10.76.9.223
57	10.76.9.224/30	10.76.9.225 – 10.76.9.226	10.76.9.227
58	10.76.9.228/30	10.76.9.229 – 10.76.9.230	10.76.9.231
59	10.76.9.232/30	10.76.9.233 – 10.76.9.234	10.76.9.235
60	10.76.9.236/30	10.76.9.237 – 10.76.9.238	10.76.9.239
61	10.76.9.240/30	10.76.9.241 – 10.76.9.242	10.76.9.243
62	10.76.9.244/30	10.76.9.245 – 10.76.9.246	10.76.9.247
63	10.76.9.248/30	10.76.9.249 – 10.76.9.250	10.76.9.251
64	10.76.9.252/30	10.76.9.253 – 10.76.9.254	10.76.9.255

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /24
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	1
/25	255.255.255.128	128	126	2 split →
/26	255.255.255.192	64	62	4 split →
/27	255.255.255.224	32	30	8 split →
/28	255.255.255.240	16	14	16 split →
/29	255.255.255.248	8	6	32 split →
/30	255.255.255.252	4	2	64 split →
/31	255.255.255.254	2	2	128 split →
/32	255.255.255.255	1	1	256 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →