ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.84.192/26
network10.76.84.192/26
broadcast10.76.84.255
first host10.76.84.193
last host10.76.84.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.76.84.192/26
address00001010.01001100.01010100.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001100.01010100.11000000
broadcast00001010.01001100.01010100.11111111
green = network part, grey = host part
hex0x0a4c54c0
decimal172774592
reverse dns192.84.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:54c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.84.192/3210.76.84.192 – 10.76.84.19210.76.84.192
210.76.84.193/3210.76.84.193 – 10.76.84.19310.76.84.193
310.76.84.194/3210.76.84.194 – 10.76.84.19410.76.84.194
410.76.84.195/3210.76.84.195 – 10.76.84.19510.76.84.195
510.76.84.196/3210.76.84.196 – 10.76.84.19610.76.84.196
610.76.84.197/3210.76.84.197 – 10.76.84.19710.76.84.197
710.76.84.198/3210.76.84.198 – 10.76.84.19810.76.84.198
810.76.84.199/3210.76.84.199 – 10.76.84.19910.76.84.199
910.76.84.200/3210.76.84.200 – 10.76.84.20010.76.84.200
1010.76.84.201/3210.76.84.201 – 10.76.84.20110.76.84.201
1110.76.84.202/3210.76.84.202 – 10.76.84.20210.76.84.202
1210.76.84.203/3210.76.84.203 – 10.76.84.20310.76.84.203
1310.76.84.204/3210.76.84.204 – 10.76.84.20410.76.84.204
1410.76.84.205/3210.76.84.205 – 10.76.84.20510.76.84.205
1510.76.84.206/3210.76.84.206 – 10.76.84.20610.76.84.206
1610.76.84.207/3210.76.84.207 – 10.76.84.20710.76.84.207
1710.76.84.208/3210.76.84.208 – 10.76.84.20810.76.84.208
1810.76.84.209/3210.76.84.209 – 10.76.84.20910.76.84.209
1910.76.84.210/3210.76.84.210 – 10.76.84.21010.76.84.210
2010.76.84.211/3210.76.84.211 – 10.76.84.21110.76.84.211
2110.76.84.212/3210.76.84.212 – 10.76.84.21210.76.84.212
2210.76.84.213/3210.76.84.213 – 10.76.84.21310.76.84.213
2310.76.84.214/3210.76.84.214 – 10.76.84.21410.76.84.214
2410.76.84.215/3210.76.84.215 – 10.76.84.21510.76.84.215
2510.76.84.216/3210.76.84.216 – 10.76.84.21610.76.84.216
2610.76.84.217/3210.76.84.217 – 10.76.84.21710.76.84.217
2710.76.84.218/3210.76.84.218 – 10.76.84.21810.76.84.218
2810.76.84.219/3210.76.84.219 – 10.76.84.21910.76.84.219
2910.76.84.220/3210.76.84.220 – 10.76.84.22010.76.84.220
3010.76.84.221/3210.76.84.221 – 10.76.84.22110.76.84.221
3110.76.84.222/3210.76.84.222 – 10.76.84.22210.76.84.222
3210.76.84.223/3210.76.84.223 – 10.76.84.22310.76.84.223
3310.76.84.224/3210.76.84.224 – 10.76.84.22410.76.84.224
3410.76.84.225/3210.76.84.225 – 10.76.84.22510.76.84.225
3510.76.84.226/3210.76.84.226 – 10.76.84.22610.76.84.226
3610.76.84.227/3210.76.84.227 – 10.76.84.22710.76.84.227
3710.76.84.228/3210.76.84.228 – 10.76.84.22810.76.84.228
3810.76.84.229/3210.76.84.229 – 10.76.84.22910.76.84.229
3910.76.84.230/3210.76.84.230 – 10.76.84.23010.76.84.230
4010.76.84.231/3210.76.84.231 – 10.76.84.23110.76.84.231
4110.76.84.232/3210.76.84.232 – 10.76.84.23210.76.84.232
4210.76.84.233/3210.76.84.233 – 10.76.84.23310.76.84.233
4310.76.84.234/3210.76.84.234 – 10.76.84.23410.76.84.234
4410.76.84.235/3210.76.84.235 – 10.76.84.23510.76.84.235
4510.76.84.236/3210.76.84.236 – 10.76.84.23610.76.84.236
4610.76.84.237/3210.76.84.237 – 10.76.84.23710.76.84.237
4710.76.84.238/3210.76.84.238 – 10.76.84.23810.76.84.238
4810.76.84.239/3210.76.84.239 – 10.76.84.23910.76.84.239
4910.76.84.240/3210.76.84.240 – 10.76.84.24010.76.84.240
5010.76.84.241/3210.76.84.241 – 10.76.84.24110.76.84.241
5110.76.84.242/3210.76.84.242 – 10.76.84.24210.76.84.242
5210.76.84.243/3210.76.84.243 – 10.76.84.24310.76.84.243
5310.76.84.244/3210.76.84.244 – 10.76.84.24410.76.84.244
5410.76.84.245/3210.76.84.245 – 10.76.84.24510.76.84.245
5510.76.84.246/3210.76.84.246 – 10.76.84.24610.76.84.246
5610.76.84.247/3210.76.84.247 – 10.76.84.24710.76.84.247
5710.76.84.248/3210.76.84.248 – 10.76.84.24810.76.84.248
5810.76.84.249/3210.76.84.249 – 10.76.84.24910.76.84.249
5910.76.84.250/3210.76.84.250 – 10.76.84.25010.76.84.250
6010.76.84.251/3210.76.84.251 – 10.76.84.25110.76.84.251
6110.76.84.252/3210.76.84.252 – 10.76.84.25210.76.84.252
6210.76.84.253/3210.76.84.253 – 10.76.84.25310.76.84.253
6310.76.84.254/3210.76.84.254 – 10.76.84.25410.76.84.254
6410.76.84.255/3210.76.84.255 – 10.76.84.25510.76.84.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →