ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.78.128/26
network10.76.78.128/26
broadcast10.76.78.191
first host10.76.78.129
last host10.76.78.190
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.76.78.128/26
address00001010.01001100.01001110.10000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001100.01001110.10000000
broadcast00001010.01001100.01001110.10111111
green = network part, grey = host part
hex0x0a4c4e80
decimal172772992
reverse dns128.78.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:4e80

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.76.78.128/3110.76.78.128 – 10.76.78.12910.76.78.129
210.76.78.130/3110.76.78.130 – 10.76.78.13110.76.78.131
310.76.78.132/3110.76.78.132 – 10.76.78.13310.76.78.133
410.76.78.134/3110.76.78.134 – 10.76.78.13510.76.78.135
510.76.78.136/3110.76.78.136 – 10.76.78.13710.76.78.137
610.76.78.138/3110.76.78.138 – 10.76.78.13910.76.78.139
710.76.78.140/3110.76.78.140 – 10.76.78.14110.76.78.141
810.76.78.142/3110.76.78.142 – 10.76.78.14310.76.78.143
910.76.78.144/3110.76.78.144 – 10.76.78.14510.76.78.145
1010.76.78.146/3110.76.78.146 – 10.76.78.14710.76.78.147
1110.76.78.148/3110.76.78.148 – 10.76.78.14910.76.78.149
1210.76.78.150/3110.76.78.150 – 10.76.78.15110.76.78.151
1310.76.78.152/3110.76.78.152 – 10.76.78.15310.76.78.153
1410.76.78.154/3110.76.78.154 – 10.76.78.15510.76.78.155
1510.76.78.156/3110.76.78.156 – 10.76.78.15710.76.78.157
1610.76.78.158/3110.76.78.158 – 10.76.78.15910.76.78.159
1710.76.78.160/3110.76.78.160 – 10.76.78.16110.76.78.161
1810.76.78.162/3110.76.78.162 – 10.76.78.16310.76.78.163
1910.76.78.164/3110.76.78.164 – 10.76.78.16510.76.78.165
2010.76.78.166/3110.76.78.166 – 10.76.78.16710.76.78.167
2110.76.78.168/3110.76.78.168 – 10.76.78.16910.76.78.169
2210.76.78.170/3110.76.78.170 – 10.76.78.17110.76.78.171
2310.76.78.172/3110.76.78.172 – 10.76.78.17310.76.78.173
2410.76.78.174/3110.76.78.174 – 10.76.78.17510.76.78.175
2510.76.78.176/3110.76.78.176 – 10.76.78.17710.76.78.177
2610.76.78.178/3110.76.78.178 – 10.76.78.17910.76.78.179
2710.76.78.180/3110.76.78.180 – 10.76.78.18110.76.78.181
2810.76.78.182/3110.76.78.182 – 10.76.78.18310.76.78.183
2910.76.78.184/3110.76.78.184 – 10.76.78.18510.76.78.185
3010.76.78.186/3110.76.78.186 – 10.76.78.18710.76.78.187
3110.76.78.188/3110.76.78.188 – 10.76.78.18910.76.78.189
3210.76.78.190/3110.76.78.190 – 10.76.78.19110.76.78.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →