ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.72.0/24
network10.76.72.0/24
broadcast10.76.72.255
first host10.76.72.1
last host10.76.72.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.72.0/24
address00001010.01001100.01001000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.01001000.00000000
broadcast00001010.01001100.01001000.11111111
green = network part, grey = host part
hex0x0a4c4800
decimal172771328
reverse dns0.72.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:4800

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.72.0/3010.76.72.1 – 10.76.72.210.76.72.3
210.76.72.4/3010.76.72.5 – 10.76.72.610.76.72.7
310.76.72.8/3010.76.72.9 – 10.76.72.1010.76.72.11
410.76.72.12/3010.76.72.13 – 10.76.72.1410.76.72.15
510.76.72.16/3010.76.72.17 – 10.76.72.1810.76.72.19
610.76.72.20/3010.76.72.21 – 10.76.72.2210.76.72.23
710.76.72.24/3010.76.72.25 – 10.76.72.2610.76.72.27
810.76.72.28/3010.76.72.29 – 10.76.72.3010.76.72.31
910.76.72.32/3010.76.72.33 – 10.76.72.3410.76.72.35
1010.76.72.36/3010.76.72.37 – 10.76.72.3810.76.72.39
1110.76.72.40/3010.76.72.41 – 10.76.72.4210.76.72.43
1210.76.72.44/3010.76.72.45 – 10.76.72.4610.76.72.47
1310.76.72.48/3010.76.72.49 – 10.76.72.5010.76.72.51
1410.76.72.52/3010.76.72.53 – 10.76.72.5410.76.72.55
1510.76.72.56/3010.76.72.57 – 10.76.72.5810.76.72.59
1610.76.72.60/3010.76.72.61 – 10.76.72.6210.76.72.63
1710.76.72.64/3010.76.72.65 – 10.76.72.6610.76.72.67
1810.76.72.68/3010.76.72.69 – 10.76.72.7010.76.72.71
1910.76.72.72/3010.76.72.73 – 10.76.72.7410.76.72.75
2010.76.72.76/3010.76.72.77 – 10.76.72.7810.76.72.79
2110.76.72.80/3010.76.72.81 – 10.76.72.8210.76.72.83
2210.76.72.84/3010.76.72.85 – 10.76.72.8610.76.72.87
2310.76.72.88/3010.76.72.89 – 10.76.72.9010.76.72.91
2410.76.72.92/3010.76.72.93 – 10.76.72.9410.76.72.95
2510.76.72.96/3010.76.72.97 – 10.76.72.9810.76.72.99
2610.76.72.100/3010.76.72.101 – 10.76.72.10210.76.72.103
2710.76.72.104/3010.76.72.105 – 10.76.72.10610.76.72.107
2810.76.72.108/3010.76.72.109 – 10.76.72.11010.76.72.111
2910.76.72.112/3010.76.72.113 – 10.76.72.11410.76.72.115
3010.76.72.116/3010.76.72.117 – 10.76.72.11810.76.72.119
3110.76.72.120/3010.76.72.121 – 10.76.72.12210.76.72.123
3210.76.72.124/3010.76.72.125 – 10.76.72.12610.76.72.127
3310.76.72.128/3010.76.72.129 – 10.76.72.13010.76.72.131
3410.76.72.132/3010.76.72.133 – 10.76.72.13410.76.72.135
3510.76.72.136/3010.76.72.137 – 10.76.72.13810.76.72.139
3610.76.72.140/3010.76.72.141 – 10.76.72.14210.76.72.143
3710.76.72.144/3010.76.72.145 – 10.76.72.14610.76.72.147
3810.76.72.148/3010.76.72.149 – 10.76.72.15010.76.72.151
3910.76.72.152/3010.76.72.153 – 10.76.72.15410.76.72.155
4010.76.72.156/3010.76.72.157 – 10.76.72.15810.76.72.159
4110.76.72.160/3010.76.72.161 – 10.76.72.16210.76.72.163
4210.76.72.164/3010.76.72.165 – 10.76.72.16610.76.72.167
4310.76.72.168/3010.76.72.169 – 10.76.72.17010.76.72.171
4410.76.72.172/3010.76.72.173 – 10.76.72.17410.76.72.175
4510.76.72.176/3010.76.72.177 – 10.76.72.17810.76.72.179
4610.76.72.180/3010.76.72.181 – 10.76.72.18210.76.72.183
4710.76.72.184/3010.76.72.185 – 10.76.72.18610.76.72.187
4810.76.72.188/3010.76.72.189 – 10.76.72.19010.76.72.191
4910.76.72.192/3010.76.72.193 – 10.76.72.19410.76.72.195
5010.76.72.196/3010.76.72.197 – 10.76.72.19810.76.72.199
5110.76.72.200/3010.76.72.201 – 10.76.72.20210.76.72.203
5210.76.72.204/3010.76.72.205 – 10.76.72.20610.76.72.207
5310.76.72.208/3010.76.72.209 – 10.76.72.21010.76.72.211
5410.76.72.212/3010.76.72.213 – 10.76.72.21410.76.72.215
5510.76.72.216/3010.76.72.217 – 10.76.72.21810.76.72.219
5610.76.72.220/3010.76.72.221 – 10.76.72.22210.76.72.223
5710.76.72.224/3010.76.72.225 – 10.76.72.22610.76.72.227
5810.76.72.228/3010.76.72.229 – 10.76.72.23010.76.72.231
5910.76.72.232/3010.76.72.233 – 10.76.72.23410.76.72.235
6010.76.72.236/3010.76.72.237 – 10.76.72.23810.76.72.239
6110.76.72.240/3010.76.72.241 – 10.76.72.24210.76.72.243
6210.76.72.244/3010.76.72.245 – 10.76.72.24610.76.72.247
6310.76.72.248/3010.76.72.249 – 10.76.72.25010.76.72.251
6410.76.72.252/3010.76.72.253 – 10.76.72.25410.76.72.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →