ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.72.0/22
network10.76.72.0/22
broadcast10.76.75.255
first host10.76.72.1
last host10.76.75.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.76.72.0/22
address00001010.01001100.01001000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01001100.01001000.00000000
broadcast00001010.01001100.01001011.11111111
green = network part, grey = host part
hex0x0a4c4800
decimal172771328
reverse dns0.72.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:4800

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.72.0/2810.76.72.1 – 10.76.72.1410.76.72.15
210.76.72.16/2810.76.72.17 – 10.76.72.3010.76.72.31
310.76.72.32/2810.76.72.33 – 10.76.72.4610.76.72.47
410.76.72.48/2810.76.72.49 – 10.76.72.6210.76.72.63
510.76.72.64/2810.76.72.65 – 10.76.72.7810.76.72.79
610.76.72.80/2810.76.72.81 – 10.76.72.9410.76.72.95
710.76.72.96/2810.76.72.97 – 10.76.72.11010.76.72.111
810.76.72.112/2810.76.72.113 – 10.76.72.12610.76.72.127
910.76.72.128/2810.76.72.129 – 10.76.72.14210.76.72.143
1010.76.72.144/2810.76.72.145 – 10.76.72.15810.76.72.159
1110.76.72.160/2810.76.72.161 – 10.76.72.17410.76.72.175
1210.76.72.176/2810.76.72.177 – 10.76.72.19010.76.72.191
1310.76.72.192/2810.76.72.193 – 10.76.72.20610.76.72.207
1410.76.72.208/2810.76.72.209 – 10.76.72.22210.76.72.223
1510.76.72.224/2810.76.72.225 – 10.76.72.23810.76.72.239
1610.76.72.240/2810.76.72.241 – 10.76.72.25410.76.72.255
1710.76.73.0/2810.76.73.1 – 10.76.73.1410.76.73.15
1810.76.73.16/2810.76.73.17 – 10.76.73.3010.76.73.31
1910.76.73.32/2810.76.73.33 – 10.76.73.4610.76.73.47
2010.76.73.48/2810.76.73.49 – 10.76.73.6210.76.73.63
2110.76.73.64/2810.76.73.65 – 10.76.73.7810.76.73.79
2210.76.73.80/2810.76.73.81 – 10.76.73.9410.76.73.95
2310.76.73.96/2810.76.73.97 – 10.76.73.11010.76.73.111
2410.76.73.112/2810.76.73.113 – 10.76.73.12610.76.73.127
2510.76.73.128/2810.76.73.129 – 10.76.73.14210.76.73.143
2610.76.73.144/2810.76.73.145 – 10.76.73.15810.76.73.159
2710.76.73.160/2810.76.73.161 – 10.76.73.17410.76.73.175
2810.76.73.176/2810.76.73.177 – 10.76.73.19010.76.73.191
2910.76.73.192/2810.76.73.193 – 10.76.73.20610.76.73.207
3010.76.73.208/2810.76.73.209 – 10.76.73.22210.76.73.223
3110.76.73.224/2810.76.73.225 – 10.76.73.23810.76.73.239
3210.76.73.240/2810.76.73.241 – 10.76.73.25410.76.73.255
3310.76.74.0/2810.76.74.1 – 10.76.74.1410.76.74.15
3410.76.74.16/2810.76.74.17 – 10.76.74.3010.76.74.31
3510.76.74.32/2810.76.74.33 – 10.76.74.4610.76.74.47
3610.76.74.48/2810.76.74.49 – 10.76.74.6210.76.74.63
3710.76.74.64/2810.76.74.65 – 10.76.74.7810.76.74.79
3810.76.74.80/2810.76.74.81 – 10.76.74.9410.76.74.95
3910.76.74.96/2810.76.74.97 – 10.76.74.11010.76.74.111
4010.76.74.112/2810.76.74.113 – 10.76.74.12610.76.74.127
4110.76.74.128/2810.76.74.129 – 10.76.74.14210.76.74.143
4210.76.74.144/2810.76.74.145 – 10.76.74.15810.76.74.159
4310.76.74.160/2810.76.74.161 – 10.76.74.17410.76.74.175
4410.76.74.176/2810.76.74.177 – 10.76.74.19010.76.74.191
4510.76.74.192/2810.76.74.193 – 10.76.74.20610.76.74.207
4610.76.74.208/2810.76.74.209 – 10.76.74.22210.76.74.223
4710.76.74.224/2810.76.74.225 – 10.76.74.23810.76.74.239
4810.76.74.240/2810.76.74.241 – 10.76.74.25410.76.74.255
4910.76.75.0/2810.76.75.1 – 10.76.75.1410.76.75.15
5010.76.75.16/2810.76.75.17 – 10.76.75.3010.76.75.31
5110.76.75.32/2810.76.75.33 – 10.76.75.4610.76.75.47
5210.76.75.48/2810.76.75.49 – 10.76.75.6210.76.75.63
5310.76.75.64/2810.76.75.65 – 10.76.75.7810.76.75.79
5410.76.75.80/2810.76.75.81 – 10.76.75.9410.76.75.95
5510.76.75.96/2810.76.75.97 – 10.76.75.11010.76.75.111
5610.76.75.112/2810.76.75.113 – 10.76.75.12610.76.75.127
5710.76.75.128/2810.76.75.129 – 10.76.75.14210.76.75.143
5810.76.75.144/2810.76.75.145 – 10.76.75.15810.76.75.159
5910.76.75.160/2810.76.75.161 – 10.76.75.17410.76.75.175
6010.76.75.176/2810.76.75.177 – 10.76.75.19010.76.75.191
6110.76.75.192/2810.76.75.193 – 10.76.75.20610.76.75.207
6210.76.75.208/2810.76.75.209 – 10.76.75.22210.76.75.223
6310.76.75.224/2810.76.75.225 – 10.76.75.23810.76.75.239
6410.76.75.240/2810.76.75.241 – 10.76.75.25410.76.75.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →