ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.53.192/26
network10.76.53.192/26
broadcast10.76.53.255
first host10.76.53.193
last host10.76.53.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.76.53.192/26
address00001010.01001100.00110101.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001100.00110101.11000000
broadcast00001010.01001100.00110101.11111111
green = network part, grey = host part
hex0x0a4c35c0
decimal172766656
reverse dns192.53.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:35c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.53.192/3210.76.53.192 – 10.76.53.19210.76.53.192
210.76.53.193/3210.76.53.193 – 10.76.53.19310.76.53.193
310.76.53.194/3210.76.53.194 – 10.76.53.19410.76.53.194
410.76.53.195/3210.76.53.195 – 10.76.53.19510.76.53.195
510.76.53.196/3210.76.53.196 – 10.76.53.19610.76.53.196
610.76.53.197/3210.76.53.197 – 10.76.53.19710.76.53.197
710.76.53.198/3210.76.53.198 – 10.76.53.19810.76.53.198
810.76.53.199/3210.76.53.199 – 10.76.53.19910.76.53.199
910.76.53.200/3210.76.53.200 – 10.76.53.20010.76.53.200
1010.76.53.201/3210.76.53.201 – 10.76.53.20110.76.53.201
1110.76.53.202/3210.76.53.202 – 10.76.53.20210.76.53.202
1210.76.53.203/3210.76.53.203 – 10.76.53.20310.76.53.203
1310.76.53.204/3210.76.53.204 – 10.76.53.20410.76.53.204
1410.76.53.205/3210.76.53.205 – 10.76.53.20510.76.53.205
1510.76.53.206/3210.76.53.206 – 10.76.53.20610.76.53.206
1610.76.53.207/3210.76.53.207 – 10.76.53.20710.76.53.207
1710.76.53.208/3210.76.53.208 – 10.76.53.20810.76.53.208
1810.76.53.209/3210.76.53.209 – 10.76.53.20910.76.53.209
1910.76.53.210/3210.76.53.210 – 10.76.53.21010.76.53.210
2010.76.53.211/3210.76.53.211 – 10.76.53.21110.76.53.211
2110.76.53.212/3210.76.53.212 – 10.76.53.21210.76.53.212
2210.76.53.213/3210.76.53.213 – 10.76.53.21310.76.53.213
2310.76.53.214/3210.76.53.214 – 10.76.53.21410.76.53.214
2410.76.53.215/3210.76.53.215 – 10.76.53.21510.76.53.215
2510.76.53.216/3210.76.53.216 – 10.76.53.21610.76.53.216
2610.76.53.217/3210.76.53.217 – 10.76.53.21710.76.53.217
2710.76.53.218/3210.76.53.218 – 10.76.53.21810.76.53.218
2810.76.53.219/3210.76.53.219 – 10.76.53.21910.76.53.219
2910.76.53.220/3210.76.53.220 – 10.76.53.22010.76.53.220
3010.76.53.221/3210.76.53.221 – 10.76.53.22110.76.53.221
3110.76.53.222/3210.76.53.222 – 10.76.53.22210.76.53.222
3210.76.53.223/3210.76.53.223 – 10.76.53.22310.76.53.223
3310.76.53.224/3210.76.53.224 – 10.76.53.22410.76.53.224
3410.76.53.225/3210.76.53.225 – 10.76.53.22510.76.53.225
3510.76.53.226/3210.76.53.226 – 10.76.53.22610.76.53.226
3610.76.53.227/3210.76.53.227 – 10.76.53.22710.76.53.227
3710.76.53.228/3210.76.53.228 – 10.76.53.22810.76.53.228
3810.76.53.229/3210.76.53.229 – 10.76.53.22910.76.53.229
3910.76.53.230/3210.76.53.230 – 10.76.53.23010.76.53.230
4010.76.53.231/3210.76.53.231 – 10.76.53.23110.76.53.231
4110.76.53.232/3210.76.53.232 – 10.76.53.23210.76.53.232
4210.76.53.233/3210.76.53.233 – 10.76.53.23310.76.53.233
4310.76.53.234/3210.76.53.234 – 10.76.53.23410.76.53.234
4410.76.53.235/3210.76.53.235 – 10.76.53.23510.76.53.235
4510.76.53.236/3210.76.53.236 – 10.76.53.23610.76.53.236
4610.76.53.237/3210.76.53.237 – 10.76.53.23710.76.53.237
4710.76.53.238/3210.76.53.238 – 10.76.53.23810.76.53.238
4810.76.53.239/3210.76.53.239 – 10.76.53.23910.76.53.239
4910.76.53.240/3210.76.53.240 – 10.76.53.24010.76.53.240
5010.76.53.241/3210.76.53.241 – 10.76.53.24110.76.53.241
5110.76.53.242/3210.76.53.242 – 10.76.53.24210.76.53.242
5210.76.53.243/3210.76.53.243 – 10.76.53.24310.76.53.243
5310.76.53.244/3210.76.53.244 – 10.76.53.24410.76.53.244
5410.76.53.245/3210.76.53.245 – 10.76.53.24510.76.53.245
5510.76.53.246/3210.76.53.246 – 10.76.53.24610.76.53.246
5610.76.53.247/3210.76.53.247 – 10.76.53.24710.76.53.247
5710.76.53.248/3210.76.53.248 – 10.76.53.24810.76.53.248
5810.76.53.249/3210.76.53.249 – 10.76.53.24910.76.53.249
5910.76.53.250/3210.76.53.250 – 10.76.53.25010.76.53.250
6010.76.53.251/3210.76.53.251 – 10.76.53.25110.76.53.251
6110.76.53.252/3210.76.53.252 – 10.76.53.25210.76.53.252
6210.76.53.253/3210.76.53.253 – 10.76.53.25310.76.53.253
6310.76.53.254/3210.76.53.254 – 10.76.53.25410.76.53.254
6410.76.53.255/3210.76.53.255 – 10.76.53.25510.76.53.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →