IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.76.49.0/25

network10.76.49.0/25

broadcast10.76.49.127

first host10.76.49.1

last host10.76.49.126

subnet mask255.255.255.128

wildcard0.0.0.127

addresses128

usable hosts126

classA

ipcalc 10.76.49.0/25

address00001010.01001100.00110001.00000000

subnet mask11111111.11111111.11111111.10000000

network00001010.01001100.00110001.00000000

broadcast00001010.01001100.00110001.01111111

green = network part, grey = host part

hex0x0a4c3100

decimal172765440

reverse dns0.49.76.10.in-addr.arpa

ipv4-mapped::ffff:a4c:3100

/25 split into /31 · 64 subnets

close ×

#	network	host range	broadcast
1	10.76.49.0/31	10.76.49.0 – 10.76.49.1	10.76.49.1
2	10.76.49.2/31	10.76.49.2 – 10.76.49.3	10.76.49.3
3	10.76.49.4/31	10.76.49.4 – 10.76.49.5	10.76.49.5
4	10.76.49.6/31	10.76.49.6 – 10.76.49.7	10.76.49.7
5	10.76.49.8/31	10.76.49.8 – 10.76.49.9	10.76.49.9
6	10.76.49.10/31	10.76.49.10 – 10.76.49.11	10.76.49.11
7	10.76.49.12/31	10.76.49.12 – 10.76.49.13	10.76.49.13
8	10.76.49.14/31	10.76.49.14 – 10.76.49.15	10.76.49.15
9	10.76.49.16/31	10.76.49.16 – 10.76.49.17	10.76.49.17
10	10.76.49.18/31	10.76.49.18 – 10.76.49.19	10.76.49.19
11	10.76.49.20/31	10.76.49.20 – 10.76.49.21	10.76.49.21
12	10.76.49.22/31	10.76.49.22 – 10.76.49.23	10.76.49.23
13	10.76.49.24/31	10.76.49.24 – 10.76.49.25	10.76.49.25
14	10.76.49.26/31	10.76.49.26 – 10.76.49.27	10.76.49.27
15	10.76.49.28/31	10.76.49.28 – 10.76.49.29	10.76.49.29
16	10.76.49.30/31	10.76.49.30 – 10.76.49.31	10.76.49.31
17	10.76.49.32/31	10.76.49.32 – 10.76.49.33	10.76.49.33
18	10.76.49.34/31	10.76.49.34 – 10.76.49.35	10.76.49.35
19	10.76.49.36/31	10.76.49.36 – 10.76.49.37	10.76.49.37
20	10.76.49.38/31	10.76.49.38 – 10.76.49.39	10.76.49.39
21	10.76.49.40/31	10.76.49.40 – 10.76.49.41	10.76.49.41
22	10.76.49.42/31	10.76.49.42 – 10.76.49.43	10.76.49.43
23	10.76.49.44/31	10.76.49.44 – 10.76.49.45	10.76.49.45
24	10.76.49.46/31	10.76.49.46 – 10.76.49.47	10.76.49.47
25	10.76.49.48/31	10.76.49.48 – 10.76.49.49	10.76.49.49
26	10.76.49.50/31	10.76.49.50 – 10.76.49.51	10.76.49.51
27	10.76.49.52/31	10.76.49.52 – 10.76.49.53	10.76.49.53
28	10.76.49.54/31	10.76.49.54 – 10.76.49.55	10.76.49.55
29	10.76.49.56/31	10.76.49.56 – 10.76.49.57	10.76.49.57
30	10.76.49.58/31	10.76.49.58 – 10.76.49.59	10.76.49.59
31	10.76.49.60/31	10.76.49.60 – 10.76.49.61	10.76.49.61
32	10.76.49.62/31	10.76.49.62 – 10.76.49.63	10.76.49.63
33	10.76.49.64/31	10.76.49.64 – 10.76.49.65	10.76.49.65
34	10.76.49.66/31	10.76.49.66 – 10.76.49.67	10.76.49.67
35	10.76.49.68/31	10.76.49.68 – 10.76.49.69	10.76.49.69
36	10.76.49.70/31	10.76.49.70 – 10.76.49.71	10.76.49.71
37	10.76.49.72/31	10.76.49.72 – 10.76.49.73	10.76.49.73
38	10.76.49.74/31	10.76.49.74 – 10.76.49.75	10.76.49.75
39	10.76.49.76/31	10.76.49.76 – 10.76.49.77	10.76.49.77
40	10.76.49.78/31	10.76.49.78 – 10.76.49.79	10.76.49.79
41	10.76.49.80/31	10.76.49.80 – 10.76.49.81	10.76.49.81
42	10.76.49.82/31	10.76.49.82 – 10.76.49.83	10.76.49.83
43	10.76.49.84/31	10.76.49.84 – 10.76.49.85	10.76.49.85
44	10.76.49.86/31	10.76.49.86 – 10.76.49.87	10.76.49.87
45	10.76.49.88/31	10.76.49.88 – 10.76.49.89	10.76.49.89
46	10.76.49.90/31	10.76.49.90 – 10.76.49.91	10.76.49.91
47	10.76.49.92/31	10.76.49.92 – 10.76.49.93	10.76.49.93
48	10.76.49.94/31	10.76.49.94 – 10.76.49.95	10.76.49.95
49	10.76.49.96/31	10.76.49.96 – 10.76.49.97	10.76.49.97
50	10.76.49.98/31	10.76.49.98 – 10.76.49.99	10.76.49.99
51	10.76.49.100/31	10.76.49.100 – 10.76.49.101	10.76.49.101
52	10.76.49.102/31	10.76.49.102 – 10.76.49.103	10.76.49.103
53	10.76.49.104/31	10.76.49.104 – 10.76.49.105	10.76.49.105
54	10.76.49.106/31	10.76.49.106 – 10.76.49.107	10.76.49.107
55	10.76.49.108/31	10.76.49.108 – 10.76.49.109	10.76.49.109
56	10.76.49.110/31	10.76.49.110 – 10.76.49.111	10.76.49.111
57	10.76.49.112/31	10.76.49.112 – 10.76.49.113	10.76.49.113
58	10.76.49.114/31	10.76.49.114 – 10.76.49.115	10.76.49.115
59	10.76.49.116/31	10.76.49.116 – 10.76.49.117	10.76.49.117
60	10.76.49.118/31	10.76.49.118 – 10.76.49.119	10.76.49.119
61	10.76.49.120/31	10.76.49.120 – 10.76.49.121	10.76.49.121
62	10.76.49.122/31	10.76.49.122 – 10.76.49.123	10.76.49.123
63	10.76.49.124/31	10.76.49.124 – 10.76.49.125	10.76.49.125
64	10.76.49.126/31	10.76.49.126 – 10.76.49.127	10.76.49.127

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /25
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	-
/25	255.255.255.128	128	126	1
/26	255.255.255.192	64	62	2 split →
/27	255.255.255.224	32	30	4 split →
/28	255.255.255.240	16	14	8 split →
/29	255.255.255.248	8	6	16 split →
/30	255.255.255.252	4	2	32 split →
/31	255.255.255.254	2	2	64 split →
/32	255.255.255.255	1	1	128 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →