ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.76.37.0/24
network10.76.37.0/24
broadcast10.76.37.255
first host10.76.37.1
last host10.76.37.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.37.0/24
address00001010.01001100.00100101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.00100101.00000000
broadcast00001010.01001100.00100101.11111111
green = network part, grey = host part
hex0x0a4c2500
decimal172762368
reverse dns0.37.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:2500

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.76.37.0/2910.76.37.1 – 10.76.37.610.76.37.7
210.76.37.8/2910.76.37.9 – 10.76.37.1410.76.37.15
310.76.37.16/2910.76.37.17 – 10.76.37.2210.76.37.23
410.76.37.24/2910.76.37.25 – 10.76.37.3010.76.37.31
510.76.37.32/2910.76.37.33 – 10.76.37.3810.76.37.39
610.76.37.40/2910.76.37.41 – 10.76.37.4610.76.37.47
710.76.37.48/2910.76.37.49 – 10.76.37.5410.76.37.55
810.76.37.56/2910.76.37.57 – 10.76.37.6210.76.37.63
910.76.37.64/2910.76.37.65 – 10.76.37.7010.76.37.71
1010.76.37.72/2910.76.37.73 – 10.76.37.7810.76.37.79
1110.76.37.80/2910.76.37.81 – 10.76.37.8610.76.37.87
1210.76.37.88/2910.76.37.89 – 10.76.37.9410.76.37.95
1310.76.37.96/2910.76.37.97 – 10.76.37.10210.76.37.103
1410.76.37.104/2910.76.37.105 – 10.76.37.11010.76.37.111
1510.76.37.112/2910.76.37.113 – 10.76.37.11810.76.37.119
1610.76.37.120/2910.76.37.121 – 10.76.37.12610.76.37.127
1710.76.37.128/2910.76.37.129 – 10.76.37.13410.76.37.135
1810.76.37.136/2910.76.37.137 – 10.76.37.14210.76.37.143
1910.76.37.144/2910.76.37.145 – 10.76.37.15010.76.37.151
2010.76.37.152/2910.76.37.153 – 10.76.37.15810.76.37.159
2110.76.37.160/2910.76.37.161 – 10.76.37.16610.76.37.167
2210.76.37.168/2910.76.37.169 – 10.76.37.17410.76.37.175
2310.76.37.176/2910.76.37.177 – 10.76.37.18210.76.37.183
2410.76.37.184/2910.76.37.185 – 10.76.37.19010.76.37.191
2510.76.37.192/2910.76.37.193 – 10.76.37.19810.76.37.199
2610.76.37.200/2910.76.37.201 – 10.76.37.20610.76.37.207
2710.76.37.208/2910.76.37.209 – 10.76.37.21410.76.37.215
2810.76.37.216/2910.76.37.217 – 10.76.37.22210.76.37.223
2910.76.37.224/2910.76.37.225 – 10.76.37.23010.76.37.231
3010.76.37.232/2910.76.37.233 – 10.76.37.23810.76.37.239
3110.76.37.240/2910.76.37.241 – 10.76.37.24610.76.37.247
3210.76.37.248/2910.76.37.249 – 10.76.37.25410.76.37.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →