ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.36.192/26
network10.76.36.192/26
broadcast10.76.36.255
first host10.76.36.193
last host10.76.36.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.76.36.192/26
address00001010.01001100.00100100.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001100.00100100.11000000
broadcast00001010.01001100.00100100.11111111
green = network part, grey = host part
hex0x0a4c24c0
decimal172762304
reverse dns192.36.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:24c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.36.192/3210.76.36.192 – 10.76.36.19210.76.36.192
210.76.36.193/3210.76.36.193 – 10.76.36.19310.76.36.193
310.76.36.194/3210.76.36.194 – 10.76.36.19410.76.36.194
410.76.36.195/3210.76.36.195 – 10.76.36.19510.76.36.195
510.76.36.196/3210.76.36.196 – 10.76.36.19610.76.36.196
610.76.36.197/3210.76.36.197 – 10.76.36.19710.76.36.197
710.76.36.198/3210.76.36.198 – 10.76.36.19810.76.36.198
810.76.36.199/3210.76.36.199 – 10.76.36.19910.76.36.199
910.76.36.200/3210.76.36.200 – 10.76.36.20010.76.36.200
1010.76.36.201/3210.76.36.201 – 10.76.36.20110.76.36.201
1110.76.36.202/3210.76.36.202 – 10.76.36.20210.76.36.202
1210.76.36.203/3210.76.36.203 – 10.76.36.20310.76.36.203
1310.76.36.204/3210.76.36.204 – 10.76.36.20410.76.36.204
1410.76.36.205/3210.76.36.205 – 10.76.36.20510.76.36.205
1510.76.36.206/3210.76.36.206 – 10.76.36.20610.76.36.206
1610.76.36.207/3210.76.36.207 – 10.76.36.20710.76.36.207
1710.76.36.208/3210.76.36.208 – 10.76.36.20810.76.36.208
1810.76.36.209/3210.76.36.209 – 10.76.36.20910.76.36.209
1910.76.36.210/3210.76.36.210 – 10.76.36.21010.76.36.210
2010.76.36.211/3210.76.36.211 – 10.76.36.21110.76.36.211
2110.76.36.212/3210.76.36.212 – 10.76.36.21210.76.36.212
2210.76.36.213/3210.76.36.213 – 10.76.36.21310.76.36.213
2310.76.36.214/3210.76.36.214 – 10.76.36.21410.76.36.214
2410.76.36.215/3210.76.36.215 – 10.76.36.21510.76.36.215
2510.76.36.216/3210.76.36.216 – 10.76.36.21610.76.36.216
2610.76.36.217/3210.76.36.217 – 10.76.36.21710.76.36.217
2710.76.36.218/3210.76.36.218 – 10.76.36.21810.76.36.218
2810.76.36.219/3210.76.36.219 – 10.76.36.21910.76.36.219
2910.76.36.220/3210.76.36.220 – 10.76.36.22010.76.36.220
3010.76.36.221/3210.76.36.221 – 10.76.36.22110.76.36.221
3110.76.36.222/3210.76.36.222 – 10.76.36.22210.76.36.222
3210.76.36.223/3210.76.36.223 – 10.76.36.22310.76.36.223
3310.76.36.224/3210.76.36.224 – 10.76.36.22410.76.36.224
3410.76.36.225/3210.76.36.225 – 10.76.36.22510.76.36.225
3510.76.36.226/3210.76.36.226 – 10.76.36.22610.76.36.226
3610.76.36.227/3210.76.36.227 – 10.76.36.22710.76.36.227
3710.76.36.228/3210.76.36.228 – 10.76.36.22810.76.36.228
3810.76.36.229/3210.76.36.229 – 10.76.36.22910.76.36.229
3910.76.36.230/3210.76.36.230 – 10.76.36.23010.76.36.230
4010.76.36.231/3210.76.36.231 – 10.76.36.23110.76.36.231
4110.76.36.232/3210.76.36.232 – 10.76.36.23210.76.36.232
4210.76.36.233/3210.76.36.233 – 10.76.36.23310.76.36.233
4310.76.36.234/3210.76.36.234 – 10.76.36.23410.76.36.234
4410.76.36.235/3210.76.36.235 – 10.76.36.23510.76.36.235
4510.76.36.236/3210.76.36.236 – 10.76.36.23610.76.36.236
4610.76.36.237/3210.76.36.237 – 10.76.36.23710.76.36.237
4710.76.36.238/3210.76.36.238 – 10.76.36.23810.76.36.238
4810.76.36.239/3210.76.36.239 – 10.76.36.23910.76.36.239
4910.76.36.240/3210.76.36.240 – 10.76.36.24010.76.36.240
5010.76.36.241/3210.76.36.241 – 10.76.36.24110.76.36.241
5110.76.36.242/3210.76.36.242 – 10.76.36.24210.76.36.242
5210.76.36.243/3210.76.36.243 – 10.76.36.24310.76.36.243
5310.76.36.244/3210.76.36.244 – 10.76.36.24410.76.36.244
5410.76.36.245/3210.76.36.245 – 10.76.36.24510.76.36.245
5510.76.36.246/3210.76.36.246 – 10.76.36.24610.76.36.246
5610.76.36.247/3210.76.36.247 – 10.76.36.24710.76.36.247
5710.76.36.248/3210.76.36.248 – 10.76.36.24810.76.36.248
5810.76.36.249/3210.76.36.249 – 10.76.36.24910.76.36.249
5910.76.36.250/3210.76.36.250 – 10.76.36.25010.76.36.250
6010.76.36.251/3210.76.36.251 – 10.76.36.25110.76.36.251
6110.76.36.252/3210.76.36.252 – 10.76.36.25210.76.36.252
6210.76.36.253/3210.76.36.253 – 10.76.36.25310.76.36.253
6310.76.36.254/3210.76.36.254 – 10.76.36.25410.76.36.254
6410.76.36.255/3210.76.36.255 – 10.76.36.25510.76.36.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →