ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.28.0/22
network10.76.28.0/22
broadcast10.76.31.255
first host10.76.28.1
last host10.76.31.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.76.28.0/22
address00001010.01001100.00011100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01001100.00011100.00000000
broadcast00001010.01001100.00011111.11111111
green = network part, grey = host part
hex0x0a4c1c00
decimal172760064
reverse dns0.28.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:1c00

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.28.0/2810.76.28.1 – 10.76.28.1410.76.28.15
210.76.28.16/2810.76.28.17 – 10.76.28.3010.76.28.31
310.76.28.32/2810.76.28.33 – 10.76.28.4610.76.28.47
410.76.28.48/2810.76.28.49 – 10.76.28.6210.76.28.63
510.76.28.64/2810.76.28.65 – 10.76.28.7810.76.28.79
610.76.28.80/2810.76.28.81 – 10.76.28.9410.76.28.95
710.76.28.96/2810.76.28.97 – 10.76.28.11010.76.28.111
810.76.28.112/2810.76.28.113 – 10.76.28.12610.76.28.127
910.76.28.128/2810.76.28.129 – 10.76.28.14210.76.28.143
1010.76.28.144/2810.76.28.145 – 10.76.28.15810.76.28.159
1110.76.28.160/2810.76.28.161 – 10.76.28.17410.76.28.175
1210.76.28.176/2810.76.28.177 – 10.76.28.19010.76.28.191
1310.76.28.192/2810.76.28.193 – 10.76.28.20610.76.28.207
1410.76.28.208/2810.76.28.209 – 10.76.28.22210.76.28.223
1510.76.28.224/2810.76.28.225 – 10.76.28.23810.76.28.239
1610.76.28.240/2810.76.28.241 – 10.76.28.25410.76.28.255
1710.76.29.0/2810.76.29.1 – 10.76.29.1410.76.29.15
1810.76.29.16/2810.76.29.17 – 10.76.29.3010.76.29.31
1910.76.29.32/2810.76.29.33 – 10.76.29.4610.76.29.47
2010.76.29.48/2810.76.29.49 – 10.76.29.6210.76.29.63
2110.76.29.64/2810.76.29.65 – 10.76.29.7810.76.29.79
2210.76.29.80/2810.76.29.81 – 10.76.29.9410.76.29.95
2310.76.29.96/2810.76.29.97 – 10.76.29.11010.76.29.111
2410.76.29.112/2810.76.29.113 – 10.76.29.12610.76.29.127
2510.76.29.128/2810.76.29.129 – 10.76.29.14210.76.29.143
2610.76.29.144/2810.76.29.145 – 10.76.29.15810.76.29.159
2710.76.29.160/2810.76.29.161 – 10.76.29.17410.76.29.175
2810.76.29.176/2810.76.29.177 – 10.76.29.19010.76.29.191
2910.76.29.192/2810.76.29.193 – 10.76.29.20610.76.29.207
3010.76.29.208/2810.76.29.209 – 10.76.29.22210.76.29.223
3110.76.29.224/2810.76.29.225 – 10.76.29.23810.76.29.239
3210.76.29.240/2810.76.29.241 – 10.76.29.25410.76.29.255
3310.76.30.0/2810.76.30.1 – 10.76.30.1410.76.30.15
3410.76.30.16/2810.76.30.17 – 10.76.30.3010.76.30.31
3510.76.30.32/2810.76.30.33 – 10.76.30.4610.76.30.47
3610.76.30.48/2810.76.30.49 – 10.76.30.6210.76.30.63
3710.76.30.64/2810.76.30.65 – 10.76.30.7810.76.30.79
3810.76.30.80/2810.76.30.81 – 10.76.30.9410.76.30.95
3910.76.30.96/2810.76.30.97 – 10.76.30.11010.76.30.111
4010.76.30.112/2810.76.30.113 – 10.76.30.12610.76.30.127
4110.76.30.128/2810.76.30.129 – 10.76.30.14210.76.30.143
4210.76.30.144/2810.76.30.145 – 10.76.30.15810.76.30.159
4310.76.30.160/2810.76.30.161 – 10.76.30.17410.76.30.175
4410.76.30.176/2810.76.30.177 – 10.76.30.19010.76.30.191
4510.76.30.192/2810.76.30.193 – 10.76.30.20610.76.30.207
4610.76.30.208/2810.76.30.209 – 10.76.30.22210.76.30.223
4710.76.30.224/2810.76.30.225 – 10.76.30.23810.76.30.239
4810.76.30.240/2810.76.30.241 – 10.76.30.25410.76.30.255
4910.76.31.0/2810.76.31.1 – 10.76.31.1410.76.31.15
5010.76.31.16/2810.76.31.17 – 10.76.31.3010.76.31.31
5110.76.31.32/2810.76.31.33 – 10.76.31.4610.76.31.47
5210.76.31.48/2810.76.31.49 – 10.76.31.6210.76.31.63
5310.76.31.64/2810.76.31.65 – 10.76.31.7810.76.31.79
5410.76.31.80/2810.76.31.81 – 10.76.31.9410.76.31.95
5510.76.31.96/2810.76.31.97 – 10.76.31.11010.76.31.111
5610.76.31.112/2810.76.31.113 – 10.76.31.12610.76.31.127
5710.76.31.128/2810.76.31.129 – 10.76.31.14210.76.31.143
5810.76.31.144/2810.76.31.145 – 10.76.31.15810.76.31.159
5910.76.31.160/2810.76.31.161 – 10.76.31.17410.76.31.175
6010.76.31.176/2810.76.31.177 – 10.76.31.19010.76.31.191
6110.76.31.192/2810.76.31.193 – 10.76.31.20610.76.31.207
6210.76.31.208/2810.76.31.209 – 10.76.31.22210.76.31.223
6310.76.31.224/2810.76.31.225 – 10.76.31.23810.76.31.239
6410.76.31.240/2810.76.31.241 – 10.76.31.25410.76.31.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →